Try http://sampro.pl/
Or ask Przekret. He is the admin of sampro.pl (admin@sampro.pl)
Read that he is very good in getting official firmwares
"LOOK" Here First {List} Roms/Kernels/Mods/Themes/FAQ'S *Update 27/09/11*
- Thread starter Lorddeff07
- Start date
Try http://sampro.pl/
Or ask Przekret. He is the admin of sampro.pl (admin@sampro.pl)
Read that he is very good in getting official firmwares
What will happen if i used a "WiFi-Only" ROM with my 3G (P7500) Tab?And is there any way to add the 3G functionality to WiFi ROMs?! 
P7500 is really lacking attention and development :'(
P7500 is really lacking attention and development :'(
Last edited:
What will happen if i used a "WiFi-Only" ROM with my 3G (P7500) Tab?And is there any way to add the 3G functionality to WiFi ROMs?!
P7500 is really lacking attention and development :'(
I have a 3G + wifi p7500 from canada,
i rooted my tab and then made a backup with rom manager
i sent the file to one of the users, am waiting to know if everything was fine for him.
If so, then ill start a new topic with a link to dl the default rom.
Maybe a n00b question,
Is it possible to make a nandroid backup with CWM without root?
Reason why i ask this is because i want to have a backup of my original stock rom without root.
I can download the a stockrom but i don't know if that will change my CSC code?
Or does this rom has multi csc?
The stock rom i downloaded is:
P7500XWKG9_P7500XXKG7_P7500OXXKG3
So when i flash CWM with odin can i create a nandroid backup???
At the moment i have stock 3.1 on my TAB.
Please see attachments
Is it possible to make a nandroid backup with CWM without root?
Reason why i ask this is because i want to have a backup of my original stock rom without root.
I can download the a stockrom but i don't know if that will change my CSC code?
Or does this rom has multi csc?
The stock rom i downloaded is:
P7500XWKG9_P7500XXKG7_P7500OXXKG3
So when i flash CWM with odin can i create a nandroid backup???
At the moment i have stock 3.1 on my TAB.
Please see attachments
Attachments
Last edited:
Yes, you can create a nandroid with CWM without rooting the tab.
It is always a good practice to have the nandroid taken before you modify anything.
I have this EXACT same problem/tablet/situation. I can't figure out how to get CWM installed on my IO Tab either. Has anybody else come across this with a solution?
Thanks for any help!
Boot-Loop
Can some one please help. I was in the process of updating my Bindroid rom and I performed the wipe date/factory reset and wipe cache and now it seems that literally all the data has been wiped out and all I get is the android logo and it seems to be in a boot loop. How do I get it to at least boot up in the stock rom.
Please help.
Can some one please help. I was in the process of updating my Bindroid rom and I performed the wipe date/factory reset and wipe cache and now it seems that literally all the data has been wiped out and all I get is the android logo and it seems to be in a boot loop. How do I get it to at least boot up in the stock rom.
Please help.
Last edited:
i just bought a galaxy tab 750, i am trying to update the rom using kies, always i get operation timed out. so thought i can flash rom directly?? any tutorial to flash rom w/o rooting r using cwm?? just odin?
i downloaded the tar file
i downloaded the tar file
Follow the instructions in http://p7510.teamovercome.net/?page_id=18 under the section named "Re-“Stocking” Yer System…"
Verizon 4G LTE Galaxy Tab 10.1 - ROOT
Follow the instructions at the top of this thread however use the latest CM recovery posted here:
http://xdaforums.com/showthread.php?t=1171089
When pushing the recovery via Odin 3. This provided the CM which allowed me to install the root exploit provided above.
Thanks to XDA for all they do!
Follow the instructions at the top of this thread however use the latest CM recovery posted here:
http://xdaforums.com/showthread.php?t=1171089
When pushing the recovery via Odin 3. This provided the CM which allowed me to install the root exploit provided above.
Thanks to XDA for all they do!
hi every, please forgive my rampant absence of presence but life and medical school got the best of me. And unfortunately I am switching tablets to the asus transformer prime so my focus on this device will be minimal if present at all.
Anyone here willing to take over this thread (though I can imagine a few here already has much thanks to them) should please inform the sub forum moderator so editing privileges can be shifted to you.
Thanks and I hope you all had enjoyed the b tab as much as i did.
Anyone here willing to take over this thread (though I can imagine a few here already has
much thanks to them) should please inform the sub forum moderator so editing privileges can be shifted to you. Thanks and I hope you all had enjoyed the b tab as much as i did.
Quoting from BarryH_GEG on 31st October 2011, 05:16 PM in this thread "http://xdaforums.com/showthread.php?t=1327257"...... "AT&T markets HSPA+ as "4G." Rogers does the same thing. So it's officially a 3G Tab capable of 21MB down on a HSPA+ network. Rogers and AT&T call that 4G the rest of the world calls it 3G or 3G+. I'm using a phone SIM in my 3G UK Tab on AT&T and get 8MB down in fake-4G (the only real 4G is LTE) cities"
I was so glad I used CWM to make a backup before I tried this 4G root method. I got a BLack boot screen and had to reflash CWM with ODIN so I could recover.
I was so glad I used CWM to make a backup before I tried this 4G root method. I got a BLack boot screen and had to reflash CWM with ODIN so I could recover.
root after 3.2 update
I have been planning on rooting my tab but now I did an update to 3.2 on my 3G device. Is the root procedure for 3G devices stated in post #1 still valid?
#edit: it is!
I have been planning on rooting my tab but now I did an update to 3.2 on my 3G device. Is the root procedure for 3G devices stated in post #1 still valid?
#edit: it is!
Last edited:
Is there any way to root the retail tab 10.1 wifi version with a locked bootloader using linux? I don't have a windows machine so I need a way to root by using linux.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
109This thread is here to make the lives of every one just that much easier. Will try to keep the first and reserved posts as up to date as humanly possible.
Please ask all questions in relation to issues you are having following the FAQ instructions to make it easier to answer your questions and easier for us to track the solutions that way the FAQ post is as up to date and accurate as possible.
As the GT10.1 landscape changes this thread will get updated. I will try and keep everything as simple and to the point as possible. Contributors will be much appreciated.
THE BASICS
BOOTLOADER MODE
Turn device off. Then hold down power + volume down button (the button closer to power button) until you see two icons appear then let go. Left icon (box) is recovery and right icon (Android robot) is Download. Use Vol. down to navigate then vol. up to select.
DOWNLOADING MODE
Just tap volume up when you have highlighted the android robot icon. You should see downloading appear under the icon.
RECOVERY MODE
Vol. up/down to navigate up or down and power button to select.
This is what you use to install ROMs/KERNELs and even themes for your specific roms when they become available. Just highlight the box icon and hit Vol. up. What we are doing now is replacing the stock recovery on your device with Clockwork Mod Recovery which allows you install unsigned ROMs/Kernels/Updates. When in recovery mode you can also back up whatever current ROM you have on your device so if you install a new ROM and something goes wrong you could always use recovery to restore. Whenever you install a new ROM it's advised to always wipe the device using cwmR to ensure a more stable install. Install new ROMS will also mean you will be losing all the apps on your device. It will look like you have a brand new device after the install unless its an update.zip for whatever rom you are currently on and the developer of that rom supports it.
Don't worry about losing your apps as you can always re-download them once you sync your device with your google account. However, the state of those apps and your settings will be lost, so I strongly suggest that you use an app like titanium back up and always make a back up of your apps before flashing any new ROMs. Check in the Recommended Apps section for a direct link to Titanium backup.
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above. If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
CLICK ME FOR ALL TERMINOLOGY DEFINITIONS
NVFLASH
Nvflash is a low level formatting and imaging tool. If you don't have a working recovery, or have broken the actual boot-loader on your tablet, this is the tool you will need to turn to. For those with unlocked bootloaders (and no fastboot capability), its the best way to root your device. Nvflash is pretty much NVida's version of say an ODIN program but done through cmd prompt. It can save a tablet if one is soft/semi-bricked or maybe full-bricked. To use nvFlash you must first put your tablet in APX mode (think of it as a way to allow you use commands on your computer to control your tablet).
Refer to this thread for downloads and instructions.
So off we go.
ROOTING YOUR TAB
GO TO SamsunFirmware.com AND DOWNLOAD A STOCK FIRMWARE FOR YOUR TAB VERSION> KEEP IN SAFE PLACE!!!!!!! You are already on the right page just scroll down.
Courtesy of RoboBear
GOOGLE I/O & RETAIL WIFI VERSION
[GTP7510]
DOWNLOADS compiled and hosted by tphillips
Content - GT-p7510_USB_Driver | hc-3.1_ota-full_sam_tab_10.1.zip(StockROM) | Odin3_v1.85 | recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 | stockretail.tar.md5(recovery) | Samsung_Galaxy_Tab_10.1_root
Download FilesForDummies.zip here
Mirror 1
Mirror 2
DONT WIPE during any part of this process. Make sure to put the stock rom from the download package on your device/use CWM and do a backup of your rom before you start anything in case something goes wrong. You have been warned!!!!!
1. Install samsung USB driver or download samsung Kies and install on your computer which will in turn install the drivers for you.
2. Run Odin.exe, choose PDA and point it to recovery.md5 file.
3. Connect tab via usb to your computer while in downloading mode then hit start in Odin on computer after connection has been established. Run, wait then reboot.
4. Connect tab to computer in usb storage mode (make sure usb debugging is off in tab settings) copy root exploit (Samsung_Galaxy_Tab_10.1_root.zip) to you tablet and take note of where it is. You can skip this part i fyou downloaded this file with your tablet.. Turn off tab. Reboot into bootloader again but this time go to recovery. Select to install zip from SDcard. navigate to where the root.zip is. Install the root.zip. Reboot into android. Your tablet is rooted.
5. Done.
You can also refer to this well made Video showing the whole procedure or this other awesome video by Dansan682.
RETAIL 3G
[GTP7500]
1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)
2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.
3. Then reboot
rooted already
For CWM
1. After rooting download and install Rom Manager from market.
2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.
3. Done.
Courtesy of Robobear
RETAIL 4G
[GTP7500] courtesy of poitee
Downloads
Kernel.zip
Recovery.zip
1. Copy Files to root of device storage.
2. Boot into Bootloader mode and navigate to and enter recovery mode.
3. Apply Kernel.zip then recovery.zip
4. reboot.....Done.
UNROOTING & RESTORING STOCK RECOVERY
1. Using CWM Flash the stock rom for your device. This unroots your device and basically makes it like a brand new tablet.
2. Use Odin to flash the stock recovery from the filesfordummies.zip.
3. Done, your device is exactly how it was when you picked it up.
FLASHING ROMS AND KERNELS
This is pretty easy as long as you have CWM on your device.
Simply boot CWM recovery, navigate to either update/instal zip from SDcard (pls adhere to ROM/kernel install instructions) and flash the .zip file of the ROM or kernel.
I will update this section with links to all the existing and stable ROMs and kernels as the become available. I will advice that you hold off on the kernels if you can as every stable kernel will eventually get cooked into a ROM unless of course you want to help test them or be on the bleeding edge.
AVAILABLE ROMS & KERNELS
LEGEND
★ - WIFI
★ - 4G
★ - 3G
★ - Custom ROM
★ - Kernel
If your Device is supported the stars will tell you all you need to know.
★[ROM]Stock US Retail WiFi in case something goes wrong
[Solution] HC 3.1 OTA Stock ODIN
★[ROM]Stock|EU|Wifi|Retail|Touchwiz
★ [ROM][STOCK][ARABIC][AUG'13]W/ Official TOUCHWIZ
★★ [ROM][CWM] 3.1|WiFi|Touchwiz UX|DEODEXED
★★ [ROM][CWM] 3.1|WiFi|Touchwiz UX [UPDATE: New WiFi Base Rom]
★★ [ROM][CWM]3.1|WiFi|Bonsai ROM|ToucWiz option|
★★ [ROM][CWM]3.1| Blazar TW Rom|OC 1.6GH Kernel|Prerooted| by Poitee
★★ [ROM] [CWM]3.1|StarBurst ROM| by PhantomHacker
★★ [ROM][CWM][EUR][3G] BroodComb G-P7500 XWKG9 [ALPHA]
★★ [ROM]Task650's KME ROM UEKME Touchwhiz
★★ [KERNEL] 3.1|WiFi|OC 1.4GHZ| by Pershoot
★★[ROM] LiquidSpeed>>> New!!!
★★[KERNEL] 3.1|WiFi|OC1.6GHZ|Voltage Control|Voodoo Sound|CIFS-NTFS| by Poitee
[TABUNTU] Galaxy Tab 10.1 NATIVE Ubuntu WIFI now with a video
IRC ONLINE CHAT
Drop in HERE if you need some Help. #gtab
ROM/KERNEL/THEMES/UPDATES BETA TESTING!!!!
Ever wanted to get whats coming before anyone else (never mind the small issue of being a guinea pig ) Well here is your chance. In this section I will put up the contact info of any dev currently looking for testers and for a limited duration, once the devs has all their testers his link will be closed. You can also think of this section as a great way to see what is coming and what stage of development its in. So stop just downloading stuff people, now you can actually really contribute to making what gets released the best it can be and as bug free as possible.
FAQ
Be sure to ask whatever questions you have in relation to anything and any problems you come across. But please start every question you have with either a
(Q) basically letting me know its a question or a
(P) letting me know its a problem
I will put up all your questions or problems on here so everyone can see them and the answers or fixes . this way people won't have to filter through tons of pages to get help.
(Q) Should I follow these instructions for an IO edition tab? Or should I just use the fastboot flash [cwm recover] and flash the zips through that?
(A) This method will work on the IO version.
(Q) kernel 2.6.36.4 is a NO-GO for the 3G version?
(A) Yes, it doesn't work on the 3G version yet.
(Q) If my tab ins locked does that mean i cant flash kernels on it?
(A) You can flash anything as long as you have a recovery that will support it. In our case CWM. Being locked and unlocked really only stops you from flashing stuff "easily" but since we can change the recovery, we can flash anything.
(Q) Does the Odin file wipe tab?
(A) No. All Odin is doing here is flashing a new recovery to your tab. Nothing more.
(P) Can't see tablet as USB storage device on Mac.
(A) Unfortunately Android and Macs don't play nice... you best bet is to use dropbox or a simple bluetooth transfer to transfer files from your mac to your tablet. Then on your Tab use a file manager app to move your files to where you want them to be. For now. Another option is to download everything that requires you using CWM with your tablet so its all already there. So in CWM all you have to do is navigate to your downloads folder. I just created a folder called mods and I have them all there.
(P) Stuck in BootLoop after Flashing ROM via Odin.
(A) You should use nvFlash to falsh CWM if you don't still have it then do a full wipe of your device including reformating all partions in mounts and storage except the boot partition then using Odin install a stock Rom on your device.
(P) I messed things up on my LTE tab and I now somehow dont have a recovery mode anymore!!!!!
(A) Go Here and scroll to post #4 and follow tijayz instructions.... make sure to thank him!!!
USER TIPS AND RECOMMENDED APPS
TIPS
1. Working Hulu
2. How to utilize the entire screen for setting widgets and icons without the 1inch gap on the sides? Use ADW launcher EX
3. Rotation Lag Fix
4. Look here for a Mod to permanently set your browser user agnet to desktop. No more mobile sites.
RECOMMENDED APPS!!!!!go on!!, find an awesome app and suggest it to be added to this list!!! Only android market or direct .apk links so isers can download and install straight from their devices
Titanium BackUp
Circle Launcher
ADW Launcher EX
Beautiful Widgets
CNN
Minimalistic Text
Thumb Keyboard
Tablet Keyboard
XBMC
PLEX
Playstation Emulator
SNES emulator
Multipicture Live wallpaper. Kiss weirdly cropped wallpapers goodbye
Wallpaper Slideshow
Dolphin Browser HD
Pulse news Reader
AutoDesk SketchBook Pro
Feedly
File Manager HD (honeycomb)
All credit goes to all the awesome devs and members of xda. I have done nothing but make this thread.4DEV CENTRE
This section will have a host of developer specific tools and even tutorials. XDA making it easier for XDA??????
Good Times....
To start things off
APK Manager: Honeycomb Edition by tphillips2
hi vert, i've send the reply to lordeff but when i rechecked my sent item i can't find the reply i gave him... so anyway heres an update on P7500 ROOT:
i use this file : http://db.tt/plhe1bq
from this Thread RIZNATCK
but basically since P7500 already on 3.1, i just put the root exploit.zip on my root sd.. then reboot into recovery (power + DOWN)
just apply zip then you'll be rooted.. simple as that... no odin no nvflash no mumbo jumbo... lucky us 3G version huh?
then CWM also same.. i saw one guy (forgot where, but he's around here) just mention download ROM manager to install CWM.. so i thought what the heck i'm rooted now so might as well as try... and it worked! so yea LOL...2
in order to do adb reboot recovery you need a rooted boot.
flash the latest tools pack, and you will get root/adb root shell/busybox,dropbear,ssh,etc.,etc.
you need to get CWM or the stock IO recovery on the device, prior to being able to flash.1
