June 25 update:
The latest WiFi Calling packages which support both MAGLDR and cLK with working mobile data.
June 18 update:
The universal update file for both MAGLDR and cLK is finished.
Mobile data issue is fixed. It works well on MAGLDR. Please test with cLK.
Please flash WiFi-Calling-htcleo-ICS_for_NAND_v2.zip and report your result.
May 20 update:
Included the latest ICS libs and app from the HTC Sensation ROM.
Since I am not a T-Mobile customer, I cannot test it.
But I think it may work for you.
Please flash WiFi-Calling-htcleo-ICS_for_NAND_testing-0520.zip and report your result.
Sep. 13 update:
Included the latest lib and updated settings of default.prop from HTC Glacier ROM.
Aug. 23 update:
The universal update file for NAND is finished.
I found that /system/default.prop has higher priority than /system/build.prop, so I moved WiFi Calling setup info from build.prop to default.prop.
It's just a re-package for all Gingerbread ROMs. No new features.
Known issues:
====== The below info can be ignored. ======
Aug. 2 update:
Only build.prop is changed to match V2.9T NAND and SD.
Jul. 9 update:
Please replace wifi-calling-htcleo-gb-20110709_for_SD.zip (for WM6.5) after using NexusHD2-Gingerbread_V2.8_SD_(GB-2.3.4).7z on WM6.5.
Jun. 28 update:
Please flash wifi-calling-htcleo-gb-20110628.zip (for MAGLDR) after flashing NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update.zip.
P.S. Only build.prop is changed to match V2.8T.
Jun. 24 update:
Good news here. WiFi Calling works well for most people now.
Update your SIM card [pictures], then your phone won't get frozen. (It's very very important.)
Reference post.
Jun. 5 update:
Please flash new wifi-calling-htcleo-gb-20110515 new for miui 1.5.20.zip. (Thanks to calculus.)
P.S. Only build.prop is changed.
May 18 update:
Please flash wifi-calling-htcleo-gb-20110518.zip (for MAGLDR) after flashing NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip.
May 8 update: T-Mobile WiFi Calling on NexusHD2-Gingerbread V2.7T
In order to enable WiFi Calling, we need to remove libhtc_ril_wrapper.so in init.rc and load libganril.so from build.prop instead.
Thus, you must have MAGLDR 1.13 bootloader on device if you want to use WiFi Calling and 3G/HSDPA mobile network (RMNET).
WiFi Calling works on HTC HD2 according to the following posts. (But some people still have wifi calling app freeze issues. No solution so far.)
Credits for WiFi Calling: zinx, unforgiven512, krohnjw, tytung, etc.
If you're trying WiFi Calling and encounter any issues, please provide the logs of logcat. Thanks.
Below info is for NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip only.
Apr. 25 update:
Please flash tytung_r9_wificalling_update20110425.zip (for cLK and MAGLDR) after flashing NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip.
Apr. 23 update:
Please flash cLK_tytung_r9_wificalling_update20110423.zip (for cLK and MAGLDR) after flashing NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip.
Apr. 18 update:
I have added Kineto Gan stuff in my r9 kernel to support WiFi Calling for T-Mobile USA users.
Current WiFi Calling app works on Froyo and Gingerbread.
I'm not a T-Mobile user, so I get Invalid SIM error and cannot do more testings when running WiFi Calling app.
If you are a T-Mobile customer and want to test my modified NexusHD2-Gingerbread ROM, please follow the steps below.
According to T-Mobile Wifi Calling thread in Nexus S forum, we need a compatible RIL (libhtc_ril.so) (maybe need a compatible radio too) that supports WiFi Calling.
Installations:
You should have either MAGLDR 1.13 or cLK 1.4 bootloader on device.
NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip uses PPP by default and is compatible with cLK and MAGLDR.
You can delete /system/ppp file to switch to RMNET mode in MAGLDR. (cLK doesn't support RMNET.)
Apr 25: After installing new tytung_r9_wificalling_update.zip, your phone will be changed to RMNET mode.
The latest WiFi Calling packages which support both MAGLDR and cLK with working mobile data.
June 18 update:
The universal update file for both MAGLDR and cLK is finished.
Mobile data issue is fixed. It works well on MAGLDR. Please test with cLK.
Please flash WiFi-Calling-htcleo-ICS_for_NAND_v2.zip and report your result.
May 20 update:
Included the latest ICS libs and app from the HTC Sensation ROM.
Since I am not a T-Mobile customer, I cannot test it.
But I think it may work for you.
Please flash WiFi-Calling-htcleo-ICS_for_NAND_testing-0520.zip and report your result.
Sep. 13 update:
Included the latest lib and updated settings of default.prop from HTC Glacier ROM.
- WiFi-Calling-htcleo-GB_for_NAND_v2.zip (for MAGLDR) after flashing any Gingerbread NAND ROMs.
- WiFi-Calling-htcleo-GB_for_SD_v2.zip (for WM6.5) when running any Gingerbread SD builds.
Aug. 23 update:
The universal update file for NAND is finished.
I found that /system/default.prop has higher priority than /system/build.prop, so I moved WiFi Calling setup info from build.prop to default.prop.
It's just a re-package for all Gingerbread ROMs. No new features.
- Please flash WiFi-Calling-htcleo-GB_for_NAND.zip (for MAGLDR) after flashing any Gingerbread ROMs, e.g. NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5).zip (or any new versions).
- To ensure the remaining system space is enough before flashing WiFi Calling update.
- Please replace WiFi-Calling-htcleo-GB_for_SD.zip (for WM6.5) after using NexusHD2-Gingerbread_V2.9_SD_(Android-2.3.5).7z (or any new versions) on WM6.5.
- Copy Android folder to your SD card to replace rootfs.img and other necessary files for WiFi Calling.
- With this rootfs.img, PPP data connection on SD build no longer works but WiFi Calling works. (They are mutual exclusive features.)
Known issues:
If WiFi Calling makes yours phone freeze for whatever reasons, you should try the following steps.
- Get a new type of SIM card. (It's very very important.) (New SIM card vs. Old SIM card)
- Uninstall Volume+
====== The below info can be ignored. ======
Aug. 2 update:
Only build.prop is changed to match V2.9T NAND and SD.
- Please flash wifi-calling-htcleo-gb-20110802_for_V2.9T_NAND.zip (for MAGLDR) after flashing NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5).zip.
- Please replace wifi-calling-htcleo-gb-20110802_for_V2.9T_SD.zip (for WM6.5) after using NexusHD2-Gingerbread_V2.9_SD_(Android-2.3.5).7z on WM6.5.
Jul. 9 update:
Please replace wifi-calling-htcleo-gb-20110709_for_SD.zip (for WM6.5) after using NexusHD2-Gingerbread_V2.8_SD_(GB-2.3.4).7z on WM6.5.
Jun. 28 update:
Please flash wifi-calling-htcleo-gb-20110628.zip (for MAGLDR) after flashing NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update.zip.
P.S. Only build.prop is changed to match V2.8T.
Jun. 24 update:
Good news here. WiFi Calling works well for most people now.
Update your SIM card [pictures], then your phone won't get frozen. (It's very very important.)
Reference post.
Jun. 5 update:
Please flash new wifi-calling-htcleo-gb-20110515 new for miui 1.5.20.zip. (Thanks to calculus.)
P.S. Only build.prop is changed.
May 18 update:
Please flash wifi-calling-htcleo-gb-20110518.zip (for MAGLDR) after flashing NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip.
May 8 update: T-Mobile WiFi Calling on NexusHD2-Gingerbread V2.7T
In order to enable WiFi Calling, we need to remove libhtc_ril_wrapper.so in init.rc and load libganril.so from build.prop instead.
Thus, you must have MAGLDR 1.13 bootloader on device if you want to use WiFi Calling and 3G/HSDPA mobile network (RMNET).
- CWM: backup and restore => Backup you current ROM first. (Required)
- CWM: wipe data/factory reset to have a clean installation.
Installation Guide for NexusHD2-Gingerbread V2.7:
- Flash MAGLDR
- Download MAGLDR 1.13 (606 KB)
- Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
- Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
- Flash ClockworkMod Recovery
- Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
- Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
- Edit flash.cfg and change "system ya 135M" to "system ya 145M". (Or use another method to enlarge your system space in order to provide enough space for WiFi Calling libs and apps.)
- Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
- Flash Android ROM
- Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
- Flash NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip (84.51 MB)
- Flash WiFi Calling libs and apps
- Flash wifi-calling-htcleo-20110508.zip (7.54 MB)
WiFi Calling works on HTC HD2 according to the following posts. (But some people still have wifi calling app freeze issues. No solution so far.)
- SkippyDogg's post (NexusHD2-Gingerbread V2.7T)
- bigd187's post (MIUI 2.3.4)
- zero324's post (NexusHD2-Gingerbread V2.6T) and his screenshot below.
Credits for WiFi Calling: zinx, unforgiven512, krohnjw, tytung, etc.
Installation Guide for other ROMs:
- Make sure you have at least 15 MB free system space. Type adb shell df command to check the system space.
- Make sure you remove libhtc_ril_wrapper.so in init.rc.
- Make sure you add WiFi Calling settings in build.prop.
- Flash kernel_tytung_r10_update.zip (for Gingerbread 2.3.4 only)
- Modify init.htcleo.rc and change service dhcpcd_eth0 to service dhcpcd before flashing kernel_tytung_r10_update.zip on Gingerbread 2.3.3.
- Flash wifi-calling-htcleo-20110508.zip
- Get build.prop from your original ROM.
- Edit build.prop with the following WiFi Calling settings.
- Comment or remove rild.libpath=/system/lib/libhtc_ril.so
Code:#rild.libpath=/system/lib/libhtc_ril.so
- Add
Code:# WiFi Calling # rild.libpath=/system/lib/librilswitch.so rilswitch.vendorlibpath=/system/lib/libhtc_ril.so rilswitch.ganlibpath=/system/lib/libganril.so mobiledata.interfaces=gannet0,rmnet0,rmnet1,rmnet2,ppp0,ppp1,ppp2 # Extras # # Uncomment the following line if you enjoy having the 3G prefix :) #ro.ril.enable.3g.prefix=1 ro.ril.def.agps.feature=1
- Update your modified build.prop to /system/build.prop in wifi-calling-htcleo-20110508.zip before flashing it.
If you're trying WiFi Calling and encounter any issues, please provide the logs of logcat. Thanks.
Code:
adb wait-for-device shell "logcat | grep 'KIPC\|GAN\|Kineto'" > logcat_Kineto.log
adb wait-for-device shell "logcat -b radio" > logcat_radio.log
adb wait-for-device shell "logcat" > logcat_ALL.log
Below info is for NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip only.
Apr. 25 update:
Please flash tytung_r9_wificalling_update20110425.zip (for cLK and MAGLDR) after flashing NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip.
Apr. 23 update:
Please flash cLK_tytung_r9_wificalling_update20110423.zip (for cLK and MAGLDR) after flashing NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip.
Apr. 18 update:
I have added Kineto Gan stuff in my r9 kernel to support WiFi Calling for T-Mobile USA users.
Current WiFi Calling app works on Froyo and Gingerbread.
I'm not a T-Mobile user, so I get Invalid SIM error and cannot do more testings when running WiFi Calling app.
If you are a T-Mobile customer and want to test my modified NexusHD2-Gingerbread ROM, please follow the steps below.
According to T-Mobile Wifi Calling thread in Nexus S forum, we need a compatible RIL (libhtc_ril.so) (maybe need a compatible radio too) that supports WiFi Calling.
Installations:
You should have either MAGLDR 1.13 or cLK 1.4 bootloader on device.
- CWM (ClockworkMod) Recovery Version via SD card (Flash update.zip)
- Installing CWM_Recovery_for_NexusHD2 (135MB system and 2MB cache) (Required)
- For Android installation you need to enter CWM Recovery.
- CWM: backup and restore => Backup you current ROM first. (Required)
- CWM: wipe data/factory reset to have a clean installation. (Required)
- CWM: install zip from sdcard: locate NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip to finish the Android installation.(Required)
Installation Guide for MAGLDR 1.13:
- Flash MAGLDR
- Download MAGLDR 1.13 (606 KB)
- Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
- Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
- Flash ClockworkMod Recovery
- Download MAGLDR_CWM_Recovery_v3.0.2.4_for_NexusHD2_135M_rboot.zip (RAW boot partition) (4.17 MB) (Apr. 16)
- Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
- Run DAF.exe to flash ClockworkMod Recovery 3.0.2.4 (MAGLDR_recovery_3.0.2.4.img).
- Flash Android ROM
- Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
- Flash NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip (87.42 MB)
Installation Guide for cLK 1.4:
- Flash cLK
- Download cLK_1.4_bootloader_for_NexusHD2_135M.zip (645 KB) and Google_usb_driver_r4.zip (8.3 MB)
- Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
- Run CustomRUU.exe to flash cLK 1.4 (RUU_signed_cLK_1.4_system_135MB_cache_2MB.nbh).
- Flash ClockworkMod Recovery
- Download cLK_1.4_CWM_Recovery_v3.0.2.4.zip (4.2 MB) (Apr. 13)
- Enter fastboot mode by holding back key (left arrow) while booting the phone.
- Run fastboot_install_recovery.bat to flash ClockworkMod Recovery 3.0.2.4 (cLK_1.4_recovery_3.0.2.4.img).
- Flash Android ROM
- Enter ClockworkMod Recovery by holding home key while booting the phone.
- Flash NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip (87.42 MB)
NexusHD2-Gingerbread_V2.6T_WiFi-Calling_update_20110418.zip uses PPP by default and is compatible with cLK and MAGLDR.
You can delete /system/ppp file to switch to RMNET mode in MAGLDR. (cLK doesn't support RMNET.)
Apr 25: After installing new tytung_r9_wificalling_update.zip, your phone will be changed to RMNET mode.
Attachments
Last edited: