[ROM][4.2.2][AOKP/CM/PA] Official Vanilla RootBox [04/02][v3.9.1][Per-App-DPI][PIE]

Status
Not open for further replies.
Search This thread
By:
Advanced…
scar45

scar45

Inactive Recognized Themer
Aug 17, 2006
1,011
1,075
Without using BT, I've had 2 hot reboots within 24 hours (flashed 0222 yesterday). Note that I am NOT complaining or whatever, but simply bringing the point forward. I know other devices running RootBox had some hot reboot issues, but since Bajee did not announce any fixes, I'm just going to wait patiently. FWIW, after the hot reboot occurs, if I check a Task Manager, I see that '/system/bin/gsiff_daemon' is spiking the CPU.

Also, further to the point that I am not trying to ***** and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:

Code: 
<6>[14358.755607] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.773139] c3 lcd panel: s6evr02_check_fb, fb2
<0>[14358.784372] c0 (sec_debug_set_upload_magic) 0
<6>[14358.784607] c0 graphics fb0: lcdfreq_reboot_notify
<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ
<6>[14358.784714] c0 REBOOT Notifier for BUSFREQ
<6>[14358.784911] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.784978] c0 s5p-ohci s5p-ohci: shutdown -
<6>[14358.785022] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.785568] c0 s5p-ehci s5p-ehci: shutdown -
<6>[14358.785636] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.785670] c0 dummy 2-0057: shutdown -
<6>[14358.786039] c0 ssp 1-0018: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.786074] c0 [SSP]: ssp_shutdown
<6>[14358.786105] c0 wake disabled for irq 352
<6>[14358.790093] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.807010] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.824223] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.842105] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.858852] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.875878] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.892955] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.910521] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.927461] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.944670] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.961933] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.979119] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.995946] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.013075] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.030465] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.047969] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.049466] c1 ssp_senosrhub_thread_func: kthread_stop()
<6>[14359.049510] c1 ssp_senosrhub_thread_func: exit
<6>[14359.064839] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.081822] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.099117] c3 lcd panel: s6evr02_check_fb, fb2
<3>[14359.101232] c0 [SSP]: toggle_mcu_reset - ssp_Normal Mode
<6>[14359.101258] c0 ssp 1-0018: shutdown -
<6>[14359.101286] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101313] c0 pn65n 12-002b: shutdown -
<6>[14359.101333] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101362] c0 s5p_ddc 5-003a: shutdown -
<6>[14359.101383] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101412] c0 sii9234_cbus 15-0064: shutdown -
<6>[14359.101433] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101462] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[14359.101484] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101511] c0 sii9234_tpi 15-003d: shutdown -
<6>[14359.101532] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101562] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[14359.101662] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101688] c0 i2c 5-0009: shutdown -
<6>[14359.101707] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101731] c0 i2c i2c-5: shutdown -
<6>[14359.101753] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.101786] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[14359.116351] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.133381] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.150591] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.168446] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.174468] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[14359.174493] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[14359.174520] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[14359.185152] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.202169] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.219367] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.224208] c0 max77686-rtc max77686-rtc: shutdown -
<6>[14359.224260] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224285] c0 dummy 7-0006: shutdown -
<6>[14359.224304] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224330] c0 max77686 7-0009: shutdown -
<6>[14359.224350] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224374] c0 i2c i2c-7: shutdown -
<6>[14359.224391] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224417] c0 wm8994 4-001a: shutdown -
<6>[14359.224435] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224459] c0 i2c i2c-4: shutdown -
<6>[14359.224477] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224503] c0 melfas-ts 3-0048: shutdown -
<6>[14359.224523] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224547] c0 i2c i2c-3: shutdown -
<6>[14359.224565] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224592] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[14359.224612] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224636] c0 i2c i2c-2: shutdown -
<6>[14359.224653] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224677] c0 i2c i2c-1: shutdown -
<6>[14359.224695] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224718] c0 i2c i2c-0: shutdown -
<6>[14359.224736] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224760] c0 i2c i2c-12: shutdown -
<6>[14359.224779] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224803] c0 ice4 22-006c: shutdown -
<6>[14359.224823] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224848] c0 i2c i2c-22: shutdown -
<6>[14359.224866] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224892] c0 an30259a 21-0030: shutdown -
<6>[14359.224911] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224936] c0 i2c i2c-21: shutdown -
<6>[14359.224961] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[14359.224992] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[14359.225018] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[14359.225900] c0 max77693-muic max77693-muic: shutdown -
<6>[14359.225931] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[14359.226913] c0 max77693-led max77693-led: shutdown -
<6>[14359.226959] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.226991] c0 dummy 17-0048: shutdown -
<6>[14359.227015] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227045] c0 dummy 17-0025: shutdown -
<6>[14359.227069] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227100] c0 max77693 17-0066: shutdown -
<6>[14359.227125] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227154] c0 i2c i2c-17: shutdown -
<6>[14359.227177] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227207] c0 i2c i2c-15: shutdown -
<6>[14359.227230] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227265] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[14359.227294] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227324] c0 i2c i2c-14: shutdown -
<6>[14359.227346] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227381] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[14359.227409] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227438] c0 i2c i2c-8: shutdown -
<6>[14359.227529] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.227573] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[14359.227602] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228261] c0 sdhci_shutdown_host : MMC Card OFF
<6>[14359.228285] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[14359.228334] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228370] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[14359.228404] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228434] c0 mdnie mdnie: shutdown -
<4>[14359.228527] c0 Disabling non-boot CPUs ...
<5>[14359.236477] c0 CPU1: shutdown
<6>[14359.236641] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.254283] c3 lcd panel: s6evr02_check_fb, fb2
<5>[14359.255124] c0 CPU2: shutdown
<5>[14359.264575] c0 CPU3: shutdown
<0>[14359.269453] c0 Restarting system with command ''.
<0>[14359.269477] c0 pid = 626 name:Thread-154
<0>[14359.269515] c0 sec_reboot (104, )
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344

Samsung S-Boot 4.0-262790 for SGH-I317M_NA_BMC (Oct  3 2012 - 09:55:09)

EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I317MVLALJ2

initialize_ddi_data: usable! (4:0xe)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4043) is caculated to t-soc(79.141)
init_fuelgauge: start: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_fuelgauge: finish: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID      = 0x02 
PMIC_IRQSRC  = 0x00 
PMIC_STATUS1 = 0x12 
PMIC_STATUS2 = 0x00 
PMIC_PWRON   = 0x09 
PMIC_IRQ1    = 0x03 
PMIC_IRQ2    = 0x00 
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2, 
load_kernel: loading boot image from 106496..
- read_bl1
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
if_ddi_data: succeeded. (4:0xe)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f76001 f7c79f0f
ATAG_INITRD2: 4 54420005 42000000 4450a
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=65 cordon=9770d737b3f8fb7668fba130b673814b androidboot.emmc_checksum=3 androidboot.bootloader=I317MVLALJ2 androidboot.serialno=42f76001f7c79f0f snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0

Starting kernel at 0x40008000...

SWITCH_SEL(1)

You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.

To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least ;)
 
  • Like
Reactions: bajee11, z28tovette and ManelScout4Life
R

RMXO

Senior Member
Feb 20, 2011
3,712
646
CA
^ If you are getting reboots due to OC'n an unstable clock, have you checked to see if you are getting hot reboots while running stock clocks?
 
Last edited:
ManelScout4Life

ManelScout4Life

Senior Member
Oct 18, 2006
2,762
5,388
Newark, NJ
scar45 said:
Without using BT, I've had 2 hot reboots within 24 hours (flashed 0222 yesterday). Note that I am NOT complaining or whatever, but simply bringing the point forward. I know other devices running RootBox had some hot reboot issues, but since Bajee did not announce any fixes, I'm just going to wait patiently. FWIW, after the hot reboot occurs, if I check a Task Manager, I see that '/system/bin/gsiff_daemon' is spiking the CPU.

Also, further to the point that I am not trying to ***** and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:

Code: 
<6>[14358.755607] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.773139] c3 lcd panel: s6evr02_check_fb, fb2
<0>[14358.784372] c0 (sec_debug_set_upload_magic) 0
<6>[14358.784607] c0 graphics fb0: lcdfreq_reboot_notify
<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ
<6>[14358.784714] c0 REBOOT Notifier for BUSFREQ
<6>[14358.784911] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.784978] c0 s5p-ohci s5p-ohci: shutdown -
<6>[14358.785022] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.785568] c0 s5p-ehci s5p-ehci: shutdown -
<6>[14358.785636] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.785670] c0 dummy 2-0057: shutdown -
<6>[14358.786039] c0 ssp 1-0018: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.786074] c0 [SSP]: ssp_shutdown
<6>[14358.786105] c0 wake disabled for irq 352
<6>[14358.790093] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.807010] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.824223] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.842105] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.858852] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.875878] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.892955] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.910521] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.927461] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.944670] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.961933] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.979119] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.995946] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.013075] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.030465] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.047969] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.049466] c1 ssp_senosrhub_thread_func: kthread_stop()
<6>[14359.049510] c1 ssp_senosrhub_thread_func: exit
<6>[14359.064839] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.081822] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.099117] c3 lcd panel: s6evr02_check_fb, fb2
<3>[14359.101232] c0 [SSP]: toggle_mcu_reset - ssp_Normal Mode
<6>[14359.101258] c0 ssp 1-0018: shutdown -
<6>[14359.101286] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101313] c0 pn65n 12-002b: shutdown -
<6>[14359.101333] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101362] c0 s5p_ddc 5-003a: shutdown -
<6>[14359.101383] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101412] c0 sii9234_cbus 15-0064: shutdown -
<6>[14359.101433] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101462] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[14359.101484] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101511] c0 sii9234_tpi 15-003d: shutdown -
<6>[14359.101532] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101562] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[14359.101662] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101688] c0 i2c 5-0009: shutdown -
<6>[14359.101707] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101731] c0 i2c i2c-5: shutdown -
<6>[14359.101753] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.101786] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[14359.116351] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.133381] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.150591] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.168446] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.174468] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[14359.174493] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[14359.174520] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[14359.185152] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.202169] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.219367] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.224208] c0 max77686-rtc max77686-rtc: shutdown -
<6>[14359.224260] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224285] c0 dummy 7-0006: shutdown -
<6>[14359.224304] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224330] c0 max77686 7-0009: shutdown -
<6>[14359.224350] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224374] c0 i2c i2c-7: shutdown -
<6>[14359.224391] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224417] c0 wm8994 4-001a: shutdown -
<6>[14359.224435] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224459] c0 i2c i2c-4: shutdown -
<6>[14359.224477] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224503] c0 melfas-ts 3-0048: shutdown -
<6>[14359.224523] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224547] c0 i2c i2c-3: shutdown -
<6>[14359.224565] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224592] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[14359.224612] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224636] c0 i2c i2c-2: shutdown -
<6>[14359.224653] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224677] c0 i2c i2c-1: shutdown -
<6>[14359.224695] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224718] c0 i2c i2c-0: shutdown -
<6>[14359.224736] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224760] c0 i2c i2c-12: shutdown -
<6>[14359.224779] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224803] c0 ice4 22-006c: shutdown -
<6>[14359.224823] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224848] c0 i2c i2c-22: shutdown -
<6>[14359.224866] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224892] c0 an30259a 21-0030: shutdown -
<6>[14359.224911] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224936] c0 i2c i2c-21: shutdown -
<6>[14359.224961] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[14359.224992] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[14359.225018] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[14359.225900] c0 max77693-muic max77693-muic: shutdown -
<6>[14359.225931] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[14359.226913] c0 max77693-led max77693-led: shutdown -
<6>[14359.226959] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.226991] c0 dummy 17-0048: shutdown -
<6>[14359.227015] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227045] c0 dummy 17-0025: shutdown -
<6>[14359.227069] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227100] c0 max77693 17-0066: shutdown -
<6>[14359.227125] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227154] c0 i2c i2c-17: shutdown -
<6>[14359.227177] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227207] c0 i2c i2c-15: shutdown -
<6>[14359.227230] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227265] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[14359.227294] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227324] c0 i2c i2c-14: shutdown -
<6>[14359.227346] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227381] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[14359.227409] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227438] c0 i2c i2c-8: shutdown -
<6>[14359.227529] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.227573] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[14359.227602] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228261] c0 sdhci_shutdown_host : MMC Card OFF
<6>[14359.228285] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[14359.228334] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228370] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[14359.228404] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228434] c0 mdnie mdnie: shutdown -
<4>[14359.228527] c0 Disabling non-boot CPUs ...
<5>[14359.236477] c0 CPU1: shutdown
<6>[14359.236641] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.254283] c3 lcd panel: s6evr02_check_fb, fb2
<5>[14359.255124] c0 CPU2: shutdown
<5>[14359.264575] c0 CPU3: shutdown
<0>[14359.269453] c0 Restarting system with command ''.
<0>[14359.269477] c0 pid = 626 name:Thread-154
<0>[14359.269515] c0 sec_reboot (104, )
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344

Samsung S-Boot 4.0-262790 for SGH-I317M_NA_BMC (Oct  3 2012 - 09:55:09)

EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I317MVLALJ2

initialize_ddi_data: usable! (4:0xe)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4043) is caculated to t-soc(79.141)
init_fuelgauge: start: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_fuelgauge: finish: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID      = 0x02 
PMIC_IRQSRC  = 0x00 
PMIC_STATUS1 = 0x12 
PMIC_STATUS2 = 0x00 
PMIC_PWRON   = 0x09 
PMIC_IRQ1    = 0x03 
PMIC_IRQ2    = 0x00 
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2, 
load_kernel: loading boot image from 106496..
- read_bl1
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
if_ddi_data: succeeded. (4:0xe)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f76001 f7c79f0f
ATAG_INITRD2: 4 54420005 42000000 4450a
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=65 cordon=9770d737b3f8fb7668fba130b673814b androidboot.emmc_checksum=3 androidboot.bootloader=I317MVLALJ2 androidboot.serialno=42f76001f7c79f0f snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0

Starting kernel at 0x40008000...

SWITCH_SEL(1)

You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.

To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least ;)
Click to expand...
Click to collapse

This is exactly what posts in here should look like. Much appreciated!
 
  • Like
Reactions: G1Master, z28tovette, scar45 and 1 other person
scar45

scar45

Inactive Recognized Themer
Aug 17, 2006
1,011
1,075
RMXO said:
^ If you are getting reboots due to OC'n an unstable clock, have you checked to see if you are getting hot reboots while running stock clocks?
Click to expand...
Click to collapse

I did say that while I was OC'ed, I was going to lower the clock, when I should have just said I was going back to stock speed. I've done so, however lowering back to 1600mhz in SetCPU would not change the 'live' clock rate until I rebooted (few hours ago). Just now, I experienced another hot reboot while I was tinkering around in Tasker (i.e. they still appear to be random, as I have not been able to reproduce it). I had also already performed a full-wipe for the 0222 nightly.

The reboot above happened at 1600mhz, with the default scheduler (row)/governor (pegasusq). I then checked the 'last_kmsg' which had an updated(/current) timestamp, however it showed the same exact trace, so no need to post it again. Again, I know it's a new kernel, so just trying to report on that, but I don't quite feel that the hot restart issues are related to the kernel/clock rates (users reported hot restarts with the Bullet kernel a few versions back).
 
ArtificialMusik

ArtificialMusik

Senior Member
Jul 20, 2011
453
158
Queen Creek, AZ
Samsung Galaxy Note 20 Ultra
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

I want to help figure out what my issue is with this ROM. There is a countless number of times where I simply lose service on my phone and it just floats right back eventually. Its very frustrating and I had the problem a little bit on CleanROM but not much. I'm thinking I might need to get a warranty replacement as its a factory defect. But I want to be sure. How can I log this to share with you what issue I might be having?

Sent from my GT-N7105 using Tapatalk 2
 
ManelScout4Life

ManelScout4Life

Senior Member
Oct 18, 2006
2,762
5,388
Newark, NJ
ArtificialMusik said:
I want to help figure out what my issue is with this ROM. There is a countless number of times where I simply lose service on my phone and it just floats right back eventually. Its very frustrating and I had the problem a little bit on CleanROM but not much. I'm thinking I might need to get a warranty replacement as its a factory defect. But I want to be sure. How can I log this to share with you what issue I might be having?

Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse

If it's happening on stock based ROMs too then it's sounding like a hardware issue.
 
P

phzi

Senior Member
Jul 23, 2009
214
37
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

I had a few hot reboots on the stock TW before I flashed to cm and later rootbox. I still see them occasionally on rootbox, but just brush it off as a minor convenience (thankfully I haven't had a reboot while on an important call).

Even so, I wouldn't jump to the conclusion that hot reboots are a hardware issue... From the logs I have seen (e.g. above), something in software (although possibly triggered by hardware component's firmware) still looks responsible.
 
bajee11

bajee11

Retired Recognized Developer
Mar 10, 2012
4,421
14,824
Montreal

* See Through Lockscreen

* Expanded Desktop - No more StatusBar in Lockscreen

Screenshot_2013-02-24-02-12-33.png
Screenshot_2013-02-24-00-36-22.png
 
  • Like
Reactions: envision, turilo, ManelScout4Life and 8 others
JesseTron

JesseTron

Senior Member
Sep 11, 2007
182
57
Thousand Oaks
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

*Transparent lock screen

*Hide status bar

Assuming this is coming in the next build? Awesome! Thank you!

Posted using a G-Note 2
 
Last edited:
A

Avatiach

Senior Member
Oct 18, 2007
275
70
Just wanted to share that Lookout Security for some reason alerts that the 2/22 zip is not secure and contains something they call "Exploit.Android.ExynosAbuse.a". I'm sure it's just them being over-cautious, but just wanted to share in case it's of interest for the devs in charge.

As for me, I installed this version and am enjoying its smoothness a lot :)
 
E

eksoccer99

Senior Member
Dec 29, 2007
587
236
JesseTron said:
*Hide status bar

Assuming this is coming in the next build? Awesome! Thank you!

Posted using a G-Note 2
Click to expand...
Click to collapse

System Settings>ROM Control>General UI>Hide Statusbar

---------- Post added at 11:28 PM ---------- Previous post was at 11:15 PM ----------
Avatiach said:
Just wanted to share that Lookout Security for some reason alerts that the 2/22 zip is not secure and contains something they call "Exploit.Android.ExynosAbuse.a". I'm sure it's just them being over-cautious, but just wanted to share in case it's of interest for the devs in charge.

As for me, I installed this version and am enjoying its smoothness a lot :)
Click to expand...
Click to collapse

Most scanners will flag unknown-sources installed from outside of the Play Store. it's a hit and miss debate.
nice little article over on/at AC
 
  • Like
Reactions: Avatiach
JesseTron

JesseTron

Senior Member
Sep 11, 2007
182
57
Thousand Oaks
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

eksoccer99 said:
System Settings>ROM Control>General UI>Hide Statusbar

---------- Post added at 11:28 PM ---------- Previous post was at 11:15 PM ----------



Most scanners will flag unknown-sources installed from outside of the Play Store. it's a hit and miss debate.
nice little article over on/at AC
Click to expand...
Click to collapse

Won't that hide it everywhere? I just want it hidden on lockscreen

Posted using a G-Note 2
 
E

eksoccer99

Senior Member
Dec 29, 2007
587
236
JesseTron said:
Won't that hide it everywhere? I just want it hidden on lockscreen

Posted using a G-Note 2
Click to expand...
Click to collapse

previously *hide status bar.... (didnt say lockscreen)
more clearly now, you meant "*...on lockscreen"
haven't tried it, but yea, probably would hide it all the time.
sorry.... moving on... good luck for a request :)
 
Warrior1975

Warrior1975

Senior Member
Jul 19, 2012
3,347
1,702
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

eksoccer99 said:
previously *hide status bar.... (didnt say lockscreen)
more clearly now, you meant "*...on lockscreen"
haven't tried it, but yea, probably would hide it all the time.
sorry.... moving on... good luck for a request :)
Click to expand...
Click to collapse

Looks like that will be in the next build.

TWEAKED 1.4™
 
kennonk

kennonk

Senior Member
Jul 16, 2010
565
171
Somewhere between silicone and silicon valley.
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]

ArtificialMusik said:
Is the kernel compatible with this rom? I don't think so. :c Is there another kernel I might be able to flash?
Click to expand...
Click to collapse

As aosp based, I think both sabre and force kernel should work. I haven't tried either of them though.

Sent from my GT-N7105 using xda app-developers app
 
Status
Not open for further replies.

Similar threads

S
[ROM][4.4.4]DN4_2.2(Ditto Note 4) for SGH-i317, i317M, T889, N7105 By the E-Team
Replies
16K
Views
2M
J
James62370
Scott
  • Locked
[ROM][7/23] CleanROM ACE 5.0 -★| Performance and Stability Never Retire! |★-
Replies
9K
Views
1M
Scott
Scott
ptmr3
  • Poll
|ROM||AROMA||----- Jedi-X20----- || Viper4Android Audio || MULTICARRIER ||4.1.2| 10|24!!
Replies
8K
Views
963K
P
pasa96
KLLSWITCH
  • Poll
[ROM][OFFICIAL][4.2.2]PAC-Man ROM v23.0.0 - PA/CM/AOKP/ - 06/10/2013 UPDATE WITH HALO
Replies
1K
Views
217K
M
martyh1
willl03
[ROM][12/21/13][4.4.2] BeanStalk 4.4.200 + W03Tweaks v2.14 *The Fine-Tuned AOSP*
Replies
6K
Views
621K
Bass_Amphetamine
Bass_Amphetamine

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 91
    ManelScout4Life
    ManelScout4Life

    RootBoxLogo_2.png


    picture.php
    picture.php

    picture.php
    picture.php



    Description

    Vanilla RootBox is built straight from RootBox sources and always carries a very light installation with no extra/useless apps. This means, you can enjoy a pure Android experience combined with AOKP/CM features and some CM cherry-picks. Keep in mind Jelly Bean is only at the beginning stage of development and there will be minor bugs. Every RootBox releases are stable and always up to the challenge for a daily usage. I personally have a high standard when it comes to releases and this is why this project always meets the expectations of users. If you're wondering how this ROM differs from any other AOKP roms out there, I only have one thing to say: Try it yourself and choose the one that meets your requirements.


    Features

    Based on JB 4.2.2- Built from RootBox Sources

    AOKP Features

    CM Profiles

    Per App DPI

    Per App Tablet UI

    Per App Language

    OTA Updates - Goo Manager

    Navigation Bar Colour

    Camera: Save to external memory

    Phone: Advance Phone Settings (Vibrate on Answer, Every 45 Seconds, On Hangup and On Call Waiting)

    Phone: Noise Suppression

    MMS: Message rate alerts (Modify SMS message limit for alert)

    MMS: Fully Customizable MMS Theme

    MMS: Soft Keyboard Type (Emoji, Enter to Send, Enter for a New Line)

    Option to control cursor in text fields using volume keys

    Home button call answer (Accessibility Option)

    Variable size pattern lockscreen

    RootBox Settings

    LockClock (Chronus)

    Launch Music app on Headset connection

    Pie (Paranoid Android)

    Option to disable sound when adjusting volume

    Lockscreen Shortcuts (Paranoid)

    Lockscreen Targets (CM)

    Screen Security Features (Unlock options)

    Expanded Desktop

    Hardware Keys Remapping

    Lockscreen Hardware Keys Remapping


    If you have a question, read the 2nd post. If it was not answered read the thread.
    Odds are if you have a question, someone else already asked it and it's been answered.

    Please do not answer questions that have been asked and answered before, just ignore/report them.


    Download
    Removed
    If you appreciate him letting us use his server, throw him a few $$ for costs.


    For GAPPs use gapps-jb-20130301-signed.zip

    You should use TWRP and always wipe system and factory reset!


    RootBox Sources

    www.github.com/Root-Box

    Kernel Sources

    CyanogenMod Samsung SMDK4412


    Credits/Thanks To:
    * bajee11 - The mastermind behind this ROM
    * AOKP
    * Teamhacksung
    * The CyanogenMod Project
    * rovo89 - For his excellent work on Xposed Framework
    * Paranoid Android
    * DaXmax
    * Rodries
    * Pier
    * BigDenn - Logo, bootanimation and wallpapers
    * MadMack
    * Cmenard

    ScreenShots/Videos

    picture.php
    picture.php

    picture.php
    picture.php



    picture.php
    ​
    View
    30
    ManelScout4Life
    ManelScout4Life
    Video Review:

    Changelog:
    http://goo.im/devs/RootBox/Nightlies/Changelogs

    Device Specific Changelog:
    Wake up on charge toggle fixed
    Auto-brightness fixed
    WiFi tether fixed

    Things that didn't changelog:
    S-pen apps

    Bugs:
    PIE always on
    Unchecking per app colors in Hybrid settings = system FC non stop
    Cm10.1 Bugs

    RootBox Homescreen - Lockscreen Tutorial

    Disable Hardware Keys

    Invisible Pie Fix

    I'm not really one for Benchmarks but DAGr8 was on to something with the Unicorn Butter :D

    Screenshot_2013-01-31-21-33-09.png
    View
    22
    ManelScout4Life
    ManelScout4Life
    I just spoke with bajee, I told him yesterday that I was going to need a 1-2 days break so he added the device to the building bot, while you guys are free to use which ever builds you want, mine are built with PUB while his are not.

    I will still continue making builds, I just want to be able to enjoy my phone as well.
    View
    21
    ManelScout4Life
    ManelScout4Life
    It's up, enjoy.
    View
    20
    ManelScout4Life
    ManelScout4Life
    3.8 is up, partial changelog:


    * Pie: Option to maintain PIE position, disregarding orientation changes.

    * See Through Lockscreen

    Screenshot_2013-02-24-02-12-33.png


    * Expanded Desktop - No more StatusBar in Lockscreen

    Screenshot_2013-02-24-00-36-22.png


    New Feature - Notification Behavior

    Screenshot_2013-02-24-04-56-38.png


    * New Sleep Tile - Turn off screen
    * New Icons for Quiet Hours - Credits : +Oliver Geith

    Screenshot_2013-02-25-00-48-24.png

    View

New posts