On the control panel on the v6 make sure you pick root so it can run as root. That's where I had messed up.
Sent from my SAMSUNG-SGH-I727 using xda premium
[ROM]SKY ICS--- 4.2D-10 (5/7/12) amazing battery, and super-fast!! 60FPS !!!!
- Thread starter seanzscreams
- Start date
-
- Tags
- development
On the control panel on the v6 make sure you pick root so it can run as root. That's where I had messed up.
Sent from my SAMSUNG-SGH-I727 using xda premium
When Tibu says you lost root its usually (in my experience) from installing supersu. I've never got it to work correctly (I probably didn't read the "howto" on it... haha). Anyhow, you may want to reflash base and update, and make sure they settle. than, after installing busybox, open superuser and hit the ok button. than go and fix permissions. Than trying running the script with the green skull on in Smanager... Thats what I did last time I tried SuperSU, but they're saying that supersu should work with TIBU with the latest update (to TIBU)
Awe crud. I read that as any base done up to this point. I installed the 7 update over the non ZX2 base and lost connectivity to ATT.
Cripes....
Had similar problem with APN, lost data and signal, managed to reset to default. I keep checking the ATT LTE APN, but always resets to the at&t pta APN. I do get 4g icon doesn't say lte under the 4g but I am assuming that's the same?
So I have the created ATT LTE APN but can't seem to make it stick.
Great ROM best update to date and V6 rocks.
Sent from my SAMSUNG-SGH-I727 using xda premium
So I have the created ATT LTE APN but can't seem to make it stick.
Great ROM best update to date and V6 rocks.
Sent from my SAMSUNG-SGH-I727 using xda premium
Last edited:
When downloading from chrome I see the Starting Download... But it doesn't show up in the notification as actually downloading.
On update 7.
---------- Post added at 03:39 PM ---------- Previous post was at 03:38 PM ----------
USB Micro-SD Adapter, LIFE SAVER!! After I flashed UCLD2 lockscreen over UCLC4..
On update 7.
---------- Post added at 03:39 PM ---------- Previous post was at 03:38 PM ----------
USB Micro-SD Adapter, LIFE SAVER!! After I flashed UCLD2 lockscreen over UCLC4..
I've been getting some terrible battery life lately. I'm getting maybe 12 hours of usage before I'm running to the charger. I actually just had it charged to 100% this morning and 2 hours later it was at 75% and I didn't even touch the phone. Anyone know as to where the source of my problem might be?
thanks. I had the SuperSU and everything work great, then redid everything for regular superuser.
I guess I will have to do a full wipe and redo everything and stick to superuser as this ROM uses it and every update it shows up anyway.
The only problem with it is that some apps, have the vibrate freeze before they do anything, like ROM Toolbox and Lucky Patcher, where on SuperSu it's smooth, but if I have to wait few extra sec. for this to work fine, I'll just use superuser.
Yes, this was after the Fix permissions of the latest update to v7. Just says starting download but never finishes or displays notification so.. ya..
yep.
I have that too, it actually comes on sometime sometime does not, all I do is make sure the file I downloaded is correct size before I use it.(means it finish download)
---------- Post added at 11:47 AM ---------- Previous post was at 11:44 AM ----------
From personal experience, the battery will drain if you have any battery saving apps running or if sync is on(especially photos).
You don;t really need sync on all the time, also where possible use wi-fi not data, it consumes much less battery on.
Also for the battery to calibrate properly you need to charge it to 100% and drain it so it turns off, at least 4 times, then only it will stabilized, this is due to flashing things in recovery consumes a lot of it and it needs to adjust to every rom.
I've been having that issue with Chrome on a few ROMs. I dunno why it happens sometimes, and doesn't happen on others.
One more.. Script Manager wasn't installed with the v7 update. When I attempt to install from the SD/Zmods there is an error..
"There is a problem parsing the package."
"There is a problem parsing the package."
it says right there where you download the update, too bad((
SKY ICS 4.2D-7 NON WIPE UPDATE
(ONLY RECOMMENDED IF YOU INSTALLED LATEST BASE) SORRY
Using an autokill manager? They usually rape my battery. When you open setting>apps>running do you have anything that seems like a battery killer? My battery lasted 25+ hrs last night, so either you have something updating/rechecking too frequently or you had a bad install of the rom.
Samsung Skyrocket i727
Sky ICS 4.2d-current
UCLD2 modem
dude, where have you been?
We have discussing it all morning
just install it from the Market
---------- Post added at 11:55 AM ---------- Previous post was at 11:51 AM ----------
on the other note, that ULTRACONFIG, it keeps setting USB Debugging to off.
Do we still need it to use Wi-Fi tethering or can I set it to off?
Huge headache today and for the life of me I can;t understand it from the instruction, one please explain, thank you.
After you do the install run the v6, I now have no hang time at all with rom toolbox or any other app. Did have to rerun fix permissions after the reboot (post v6 setup), had a couple minor fcs.
Samsung Skyrocket i727
Sky ICS 4.2d-current
UCLD2 modem
dude, where have you been?
We have discussing it all morning
just install it from the Market
---------- Post added at 11:55 AM ---------- Previous post was at 11:51 AM ----------
on the other note, that ULTRACONFIG, it keeps setting USB Debugging to off.
Do we still need it to use Wi-Fi tethering or can I set it to off?
Huge headache today and for the life of me I can;t understand it from the instruction, one please explain, thank you.
Sleep!! Long night of gaming..
I am gonna try a fresh start, thanks. Love this ROM too much to use anything else.
To clarify, you are still using Superuser right, not SuperSU?
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
192SKY ICS UCLD2 BASE
Code:[CENTER] -V6 supercharger -Deodexed -Zipaligned -Rooted -Superuser -BusyBoxed -14 toggle mod (Lidroid and Mohan)thanks -wifi tethering themed Dialer and Contacts (thanks to Kr3g3r and silver03WRX) Looks soo good guys \m/ -No am/pm carrier -60 fps launcher fling framerate -blue Clock -Mostly ics Aosp icons -Build.prop Tweaked -Battery Tweaks -Kernel Tweaks -Debloated -Bravia -Sketch font (included) -upload limits removed -Battery Warnings Removed Transparent Touch Wiz Lockscreen Aosp lockscreen (add on see below) Full Circle Battery Mod Transparent drop down status bar Themed Icons in Power menu Extended Power Menu Tethering working and non Discoverable by network (FREEZE ULTRACONFIG OR SET TO ALWAYS OFF) No Ascending Rintone (thanks Bluntman420 and m4570d0n ) [/CENTER]
DOWNLOAD AND CHGLOG ARE BELOW IN SECOND POST
1.START HERE
MUST BE ON TOUCH CLOCKWORK FIRST
DOWNLOAD TOUCH CLOCKWORK HERE
http://xdaforums.com/showthread.php?t=1566613
1B
IF YOU ARE COMING FROM GB YOU MUST FLASH AN ICS RADIO (SEE BELOW)
2.TO INSTALL BASECode:[CENTER] DONT USE DARKSIDE SCRIPT WIPE (UNLESS IT JUST WON'T WORK) 1.Wipe factory data reset ....3 times 2.go to mounts and format system 3 times 3.then install the rom.. 3A.when finished.. immediately install busybox cwm zip below 4.then go back and reboot system now 5.Then let it settle atleast 5 min...select a launcher .. 6.then continue to let it finish...and dont touch anything until screen times out !!!!! (if you have alot of pictures it will take a few minutes longer to media scan) 7.open rom manager and fix permissions 8.Reboot back to recovery[/CENTER]
3.AFTER INSTALLING BASE AND INSTALLING THE LATEST UPDATE
Code:[CENTER] 1.Clear cache partition 2.Go to Advanced, click clear Dalvik cache 3.Find Latest Sky Ics Update.zip 4.Install and reboot when finished 5.open up Rom Manager and run Fix permissions 6.One last reboot and Voila!!!! you can come from gb, or ics. Just make sure to wipe a few more times and clear your dalvik if your on gb, install new ics modem here [url]http://d-h.st/EHM[/url] its easy just do it c'mon everyones doing it[/CENTER]
HOW TO INSTALL A MODEM AND GET LTE
WORKS PERFECTLY NOW!!!!!
Code:[CENTER] Basically you need to do a few things 1.step one install modem of choice (see below) 2.Reboot phone to android and go to settings/more/mobile networks/access point names then click bottom left haptic button and say reset to default Att users should have ATT PTA Now click bottom left haptic button followed by Add apn now either copy exactly what comes up in your apn Again and hit save or for ATT type Name - ATT LTE APN - PTA proxy - notset port - not set user name -not set server - not set MMSC - [url]http://mmsc.mobile.att.net[/url] mmsproxy -proxy.mobile.att.net mms port - 80 mcc - 310 mnc - 410 Auth Type - None Apn Type - internet +mms Bearer - LTE Click bottom left haptic button and click save and select it then power off phone and remove sim card then reboot phone (no sim card) and when up go to phone and dial *#2263# Select Lte Settings All bands then bottom left haptic button / end Open dialer again. Dial *#2263# select automatic Right bottom feedback button/end power down now place sim back in phone reboot make sure apn is selected you created Rodgers APN APN: rogers-core-appl1.apn Proxy: Port: Username: Password: Server: MMSC: [url]http://mms.gprs.rogers.com[/url] MMS Proxy: 10.128.1.69 MMS Port: 80 MCC: 302 (retrieved from SIM) MNC: 720 (retrieved from SIM). Authentication type: APN type: [/CENTER]
HOW TO V6 SUPERCHARGER
Code:[center] UPDATE OR INSTALL BUSYBOX INSTALL SMANAGER FROM PLAYSTORE(IF ITS NOT INSTALLED) Everything you need is on your sd card (only if youve updated to 4.2-7) Open Smanager and browse with root permissions then look on your external sd card under Zmods you will find V6 Supercharger script open it and click the superuser button above and then click run Now i have updated Su and Services.jar has been hacked to allow this script to run with ICS It will basically take about 5 or more minutes and run you through a series of prompts i usually take its suggestions.. i set the superminkiller settings i turn on set emissions i allow it to run scripts as necessary .. These are all up to you and it being a guided install once complete.. your good to Go Check here As well http://xdaforums.com/showthread.php?t=1126940 [/indent]
[/center]90Rom and Updates
PICK THE BASE ACCORDING TO YOUR NEEDS... THE UPDATE WORKS WITH BOTH
SKY ICS 4.2D --ZX3 (UCLD2 BASES) WIPE BASE
This is The Base You Want if you need
Pop 3 and social Hub and stock email
http://d-h.st/yhx
This Is the Base you Want,
if you Want exchange limits removed
and google email instead of stock
http://d-h.st/xzq
INSTALL THIS IN CWM IMMEDIATELY AFTER YOU INSTALL BASE
http://d-h.st/Iwx
SKY ICS 4.2D-9 Ultra NON WIPE UPDATE (MAIN UPDATE)
(ONLY RECOMMENDED IF YOU INSTALLED LATEST BASE) SORRY
(INSTALL AFTER YOUVE SETUP YOUR PHONE AND SEEN IT BOOT ONCE)
http://d-h.st/gep
(WARNING THIS WILL ADD THIS WEIRD WHITE LINE TO THE TOP OF YOUR SCREEN)
This is service on your phone called battery bar that represents the life of your battery across the top
of your status bar.. which is fully customizable and can completely be disabled via the Team Battery Bar App
This app has an icon in its main screen that says turn service on or off.. Being a service
it can completely be disabled an not cause any further battery use.. Thank you and enjoy
SKY ICS 4.2D-10 NON WIPE UPDATE (ADDON UPDATE)
ONLY INSTALL THIS IF YOU ARE RUNNING THE ROM AND THE LATEST UPDATE!!!
I CANT STRESS THIS ENOUGH
http://d-h.st/5oD
MODEMS
Code:[CENTER] UCLC4 (FIRST SR LEAK) [URL]http://d-h.st/tA7[/URL] UCLD2 (LATEST LEAK) [URL]http://d-h.st/EHM[/URL] UCLC5 (GALAXY NOTE MODEM)(MY JAM) WARNING PLEASE TAKE NOTICE ... THIS MODEM FOR SOME... HAS CAUSED CORRUPTED PARTITIONS,, PLEASE BE CAREFUL AND MAKE SURE YOU KNOW WHAT YOU ARE DOING!!!!!! [URL]http://d-h.st/mDn[/URL] [/INDENT]
ADD ONS
Code:[CENTER] [B]ONLY FOR UCLD2[/B] Xloud on [url]http://d-h.st/U7S[/url] Xloud off [url]http://d-h.st/yCo[/url] Bluetooth Fix Version 1 [url]http://d-h.st/ItB[/url] Bluetooth Fix Version 2 [url]http://d-h.st/DXh[/url] TouchWiz Wallpapers.zip [url]http://d-h.st/7Mp[/url] Ics Bootanimation [url]http://d-h.st/LY4[/url] Blue Glow Circle Bootanimation [url]http://d-h.st/EFc[/url] Black Gtalk [url]http://d-h.st/Plu[/url] Normal Gtalk [url]http://d-h.st/QU2[/url] Aosp Lockscreen (transparent) [url]http://d-h.st/g7d[/url] Tw Lockscreen (transparent) [url]http://d-h.st/DQA[/url] Tw Lockscreen Rotation(trans) [url]http://d-h.st/Og2[/url] Aosp Lockscreen Rotation (trans) [url]http://d-h.st/9ob[/url] Inverted Calendar youtube and gmail [url]http://d-h.st/qqS[/url] Rervert Calendar youtube and gmail [url]http://d-h.st/w0g[/url] Fixed Wallpaper Gallery [url]http://d-h.st/dU5[/url] Original TW ICS Gallery [url]http://d-h.st/RGR[/url] Regular Dialer [url]http://d-h.st/Ff9[/url] Transparent Dialer [url]http://d-h.st/bMf[/url] Call Recording (transparent Dialer/Contacts) [url]http://d-h.st/AQv[/url] No Call Recording (black and blue Dialer/Contacts) [url]http://d-h.st/rBq[/url] Call Recording (Black and blue Dialer/Conacts) [url]http://d-h.st/1d4[/url] [/CENTER]
BATTERY MODS
Code:[CENTER] I used this page as reference [url]http://xdaforums.com/showthread.php?t=1434061[/url] i made about ten i will make more as Time permits All CWM Flashable [U][B]NO CRYSIS[/B][/U] Terminator Circle Digital ICS (#1 request) [url]http://d-h.st/8s8[/url] Stock Battery [url]http://d-h.st/Hgz[/url] No Battery3 [url]http://d-h.st/fgb[/url] 1% Circle Digital [url]http://d-h.st/hLK[/url] 1% Battery Stock [url]http://d-h.st/UKJ[/url] 1% Battery Gauge [url]http://d-h.st/P95[/url] Battery Circle Unknown [url]http://d-h.st/H3a[/url] Battery 4 Bars D79 [url]http://d-h.st/AZi[/url] Circle Sky ICS [url]http://d-h.st/npE[/url] Circle Digital No % [url]http://d-h.st/xYK[/url] CM ICS [url]http://d-h.st/sMY[/url] Digital Numbers (Not a lockscreen i dunno why i named it that) [url]http://d-h.st/zvV[/url] Honeycomb ICS [url]http://d-h.st/weE[/url] [U][B]WITH CRYSIS[/B][/U] Terminator Circle Digital ICS (#1 request) [url]http://d-h.st/niM[/url] Stock Battery [url]http://d-h.st/ZQK[/url] No Battery3 [url]http://d-h.st/Kvz[/url] 1% Circle Digital [url]http://d-h.st/b69[/url] 1% Battery Stock [url]http://d-h.st/3Ai[/url] 1% Battery Gauge [url]http://d-h.st/3nS[/url] Battery Circle Unknown [url]http://d-h.st/fA1[/url] Battery 4 Bars D79 [url]http://d-h.st/B4x[/url] Circle Sky ICS [url]http://d-h.st/dgR[/url] Circle Digital No % [url]http://d-h.st/ExE[/url] CM ICS [url]http://d-h.st/Yid[/url] Digital Numbers (Not a lockscreen i dunno why i named it that) [url]http://d-h.st/SLo[/url] Honeycomb ICS [url]http://d-h.st/3aI[/url] [/CENTER]
CHANGELOG
[/CENTER]Code:[CENTER] Add On update 4.2D-10 -Modded Camera fps and sample rate -added 60 fps to flinger and launcher and overall menus fps .. omfg this thing is smooth -im going to eat **** for doin this but cm battery is what i use and the latest mod i did alters sysui so no other battery mod will work (you will have to copy and paste battery images out until i can remake all mods) -Added increased volume to earpiece and speaker -Fixed Bluetooth timeout issue - Added Vertical Recent Apps (IMHO YOU CAN SEE WHATS OPEN ... BETTER) -Added a few misc build.prop tweaks from htc.one x -Added live wallpapers from htc one- x (hmm dunno why they arent working atm) -Replaced Surface flinger max with acceptable 12000 and min set at 8000 and a few others tricks REUPLOADED LOCKSCREENS AGAIN!!!! Update 4.2D-9 -This is only if you started over with the new base -to stay consistent -fixed laggy dialer fixed laggy contacts fixed over all lag in certain areas i was noticing -Replaced bluetooth with the best mix from what i could sense of working and non working versions -init.d scripts included -services.jar repatched for supercharger -removed all traces of blue glow i will make a stock blue glow and coca cola flashable NOT IN THIS UPDATE .. THIS IS NEXT NEW BASE 4.2--zx3 -Fixed Alot of stuff -removed most crap that was staying inconsistent through out the buil to the update -removed all experimental build.prop lines added v6 install scripts and proper busybox to initialize supercharger -you still will need to update busybox and remove the old (after you supercharge) -Removed Ultraconfig from base this way it allows phone to be setup with always tether off -fixed missing apks that caused many errors down the line -Started the base off right no themes to it just a good solid base .. - 4.2D-8 -Added Chainfire nvidia lib files to sdcard -Added Holo Music Player -Increased Flingspeed -increased max handler events -increased bluetooth timeout -Added Finalizing theme elements just touchups here and there some taken straight from Sky ics GB -Added Nexus Lcd Desnity To Addons -Fixed Every Lockscreen and Xloud to all be current (again should be the last time you download this stuff) 4.2D-7 Attempted at migrating working bluetooth from previous leak Hopefully everything should be fixed -included hacked Su to be able to run V6Supercharger -Included sd-ext folder called ZMODS look there for script -Included free version of SM (Script Manager) -Updated Framework and a few icons and colors(little by little) RE-DL LOCKSCREENS -Updated SystemUi to include proper xml file -Hacked... Personally the Services.Jar To Allow Script to Run properly As Well -Added WideBand Line back to Build.prop -ADDED LEAVES live Wallpaper -Removed Bad Apks -Removed Ultraconfig.apk on install of update, the script Deletes it [/center][/indent]24yup just got the new sr i can finally transfer things to the sd card via usb
so stoked .. note dont spill water on this one
waiting on if i can get a dump from this new leak
and yup also just playin with some things
i imagine you should see an update by monday from me with just a few fixes
and what not22This is not on that page for a good reason bc i didnt want any confusion
i will post updates tomorrow
the base is out
and done for now in my opinion
every thing from here on out is updates
what should have only taken a few hours has taken a full day
so enjoy
Make sure to wipe your phone15For everyone having update install problems, I extracted the files, cleaned up the script and repackaged and all went well.
http://d-h.st/4Op
