[Q] help with rooting galaxy note 3 SM-N900T: RECOVERY IS NOT SEANDROID ENFORCING

Search This thread

gatt427

New member
Mar 24, 2014
2
0
Hello,
This is my first post so I'm sorry of I put it in the wrong forum.
I have a Samsung galaxy note 3 SM-N900T (T-Mobile US). It was fresh out of the box.
I followed the tutorial on this site for rooting my specific model, and it got to the rebooting phase and "crashed".
It said:
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
[/COLOR]about 1:45 seconds later, much longer than the guy in the video said, Odin finally said pass, with a build time of 2:10.
it does not go past that on its own.
The Odin message box is:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

I can trick it into rebooting by unplugging and removing the battery, then booting into modification mode and clicking cancel.
Please help,
Gatt427
(And I did look all over the internet for the answer, and I couldn't find it anywhere)
 

allroy1975

Senior Member
Aug 24, 2009
403
82
Hello,
This is my first post so I'm sorry of I put it in the wrong forum.
I have a Samsung galaxy note 3 SM-N900T (T-Mobile US). It was fresh out of the box.
I followed the tutorial on this site for rooting my specific model, and it got to the rebooting phase and "crashed".
It said:
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
[/COLOR]about 1:45 seconds later, much longer than the guy in the video said, Odin finally said pass, with a build time of 2:10.
it does not go past that on its own.
The Odin message box is:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img.ext4
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

I can trick it into rebooting by unplugging and removing the battery, then booting into modification mode and clicking cancel.
Please help,
Gatt427
(And I did look all over the internet for the answer, and I couldn't find it anywhere)

weird. I just got a replacement from T-Mobile ....I'm trying to root again, and using CF-auto root I'm getting the exact same thing. I wish I could help...but hopefully one of us will get something figured out and get this figured out. :(
 

orangegeek

Member
May 3, 2014
8
1
Saratoga Springs
This will fix it, I had the same problem!

weird. I just got a replacement from T-Mobile ....I'm trying to root again, and using CF-auto root I'm getting the exact same thing. I wish I could help...but hopefully one of us will get something figured out and get this figured out. :(



try this file, it should fix it....


http://www.mediafire.com/download/1updfy4pnuctpud/CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5




good luck, it will say the same thing,

seandroid not blah blah blah

but then it will root it, just wait, youll see!

Orangegeek:D
 
  • Like
Reactions: i_seeque

jorge89

Senior Member
Dec 17, 2008
127
2
Orem
For anyone wondering if the file above works, I tried it and it did.
 
Last edited:

Top Liked Posts