[DEV] Android for Blue Angel (PXA Droid)

Search This thread

d-two

Inactive Recognized Developer
Nov 27, 2008
1,554
465
Code:
-Keyboard (in Kernel) tested with evtest (no event)
-TSC2200 Buttons (in Kernel) tested with evtest (no event)
-TSC2200 Touchscreen (in Kernel) tested with evtest (no x,y)

If I'm right, this means that these things aren't working at all :(. Am I wrong d-two?

The Touchscreen give event but no x and y coords.
I hope i can fix it at the weekend!
 

d-two

Inactive Recognized Developer
Nov 27, 2008
1,554
465
No worries, waiting for more updates ;). Could you please upload your current package so we could try even booting Froyo just like on your last video :D?

And than? Without touchscreen you can't use it!! No i upload it when the touchscreen work!
 

tomcug

Senior Member
Jun 29, 2009
598
16
It will be laggy, Blue Angel doesn't even have 3D acceleraction so don't expect miracles. This Froyo is just supposed to work and if this will work, we should be already very happy :D.
 

d-two

Inactive Recognized Developer
Nov 27, 2008
1,554
465
MOD EDIT
I did a cleanup again for you d-two.
so to all others, stay ontopic and stop asking for eta
 
Last edited by a moderator:
  • Like
Reactions: HeadHunter2009

ares93

Senior Member
Dec 17, 2008
393
95
30
Stockholm
hmm, so the calibration app (tslib?) can read the input from the touchscreen, but it cant save the settings and use them. are you getting a pointercal file?

i had a similar issue on my toughbook running ubuntu. i could calibrate the touchscreen, but it didn't give me any settings to save. so once the calibration was done, it went back to the original (nonexistent) settings.
 

d-two

Inactive Recognized Developer
Nov 27, 2008
1,554
465
hmm, so the calibration app (tslib?) can read the input from the touchscreen, but it cant save the settings and use them. are you getting a pointercal file?

i had a similar issue on my toughbook running ubuntu. i could calibrate the touchscreen, but it didn't give me any settings to save. so once the calibration was done, it went back to the original (nonexistent) settings.

Yes very confuse...

0 0 0 0 0 0 0 0 0 0 50 50 190 50 190 270 50 270 120 160

This is the pointercal??? Under EVTest all work right with X,Y ??
 

haker305

Member
Jan 13, 2007
31
1
Hey man, keep up the good work, I have Desire but BlueAngel is IMO great development device for porting android, it will save many BlueAngels from getting to trash :). With regards from Poland, /haker305.

Sent from my HTC Desire using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 63
    Android Gingerbread 2.3.6/2.3.7 CM7.2​

    xda_3_black_3.png


    DOWNLOAD ALPHA RELEASE​



    Special Greetings to notime2d8 who let me have a look at his Universal Kernel and Filesystem ;)

    And thanks to all who didn't want to help me and just said that it's not possible because of the age of the device

    Kernel 2.6.34

    Working
    -LCD
    -IRDA
    -WIFI (for the moment only in CM7.2)
    -Sound (UDA1380)
    -Bluetooth (for the moment only in CM7.2)
    -Power Supply
    -Phone Support (for the moment only in CM7.2)
    -CPU (scaling | idle)
    -DOC G3 (64MB)
    -Intel Flash (32MB) (read support)
    -GPIO (Buttons | LEDs)
    -PASIC2 (Battery | LEDs)
    -TSC2200 Chip (Buttons | Touchscreen)
    -ATI Imageon 3200 / W100 Frame Buffer
    -ASIC3 (SD/SDHC CARD | Keyboard | Backlight | Button / Keyboard Backlight | Vibrator)

    Problems
    -UDA1380 (ADC not work)
    -Keyboard Backlight (Not right detected)
    -Phone (No GPRS at the Moment | Pin must input in Windows Mobile !!:mad:)

    Not working
    -Camera (at the moment no driver available)
    -Suspend/Resume (problem with wakeup)

    ToDo
    -Intel Flash (add write support)
    -Optimize Wifi driver add WPA(2) support
    -Bootloader (port to lk)
    -Cleanup init.rc
    -Remove Battery workaround
    -Optimize OpenGL
    -Add W100 lib ?

    Thanks for the Donation:
    -Swiss420 (Thanks for Logo too)
    -Atakan Yilmaz
    -Fiona Bennett
    -kuapao
    15
    FAQ


    Q: How do I get the Google Apps?
    A: LINK

    Q: How I can help?
    A: LOOK HERE


    Kernel 3.5+

    Working
    -LCD
    -IRDA
    -WIFI (not yet)
    -Sound (UDA1380) (not yet)
    -Bluetooth (not yet)
    -Phone Support (not yet)
    -CPU (scaling | idle)
    -DOC G3 (64MB)
    -Intel Flash (32MB) (read only)
    -GPIO (Buttons | LEDs)
    -PASIC2 (Battery | LEDs)
    -Power Supply with USB Charging
    -TSC2200 Chip (Buttons | Touchscreen)
    -ATI Imageon 3200 / W100 Frame Buffer
    -ASIC3 (SD/SDHC CARD | Keyboard | Backlight | Button / Keyboard Backlight | Vibrator | LEDs)

    Problems
    -UDA1380 (ADC not work)
    -Keyboard Backlight (Not right detected)
    -Phone (No GPRS at the Moment | Pin must input in Windows Mobile !!:mad:)

    Not working
    -Camera (at the moment no driver available)
    -Suspend/Resume (problem with wakeup)

    YouTube Channel
    10

    Yes, some news:
    I have fix ATI Suspend...
    I have fix SD Card detection...
    I have create a standby mode (standby time 36 hours)
    Fix PWM asic for bootloader version...
    Kernel support now Hima, Magician and Universal too...

    and at the moment i work on the PXA-Bootloader (it can detect the different devices Himalaya, Blueangel, Magician and Universal)

    Stuff that need to fix or add:
    Flash driver in Bootloader...
    PXA framebuffer in bootloader...
    Docg driver for Universal in bootloader...
    USB Support in Bootloader...

    Fix SD card in Android...
    Fix route for mic (phone and record) in Android...

    Improvements for performances...
    9
    4GB SD by Platinum and Transcend both work with simple Install as well as Ubuntu on SX66...
    In the download area there's some Gingerbread entry created yesterday 20:35 but it's empty:confused:
    For this but it is not finish :D


    PS: Sorry for the cut the battery was empty :(
    PPS: It's CyanogenMod :D
    7
    Good News:

    I have test a 32GB SDHC Card class10 and it work :laugh:
    This card:
    http://www.amazon.de/dp/B007BJHEWK/...de=asn&creative=22494&creativeASIN=B007BJHEWK