Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
Flowed from my Nexus 4
try dirty flashing CM again
Flowed from my Nexus 4
[APP/MOD] TouchControl (Nexus 4)
- Thread starter bponury
- Start date
- Status
I had already restored to stock (waiting for apps to install). So I'll try flashing the kernel over stock Android first just to make sure it works.
Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
New beta 6 of faux kernel breaks touchcontrol. Beta 5 was working okay.
Sent from my Nexus 4 using Tapatalk 2
New beta 6 of faux kernel breaks touchcontrol. Beta 5 was working okay.
Sent from my Nexus 4 using Tapatalk 2
bug?
Tried it, but it freezes the screen and I can't get to my phone anymore for a while. Then, all of a sudden, it goes back to working. In truth, I've been trying the free version and I don't know if this would happen with the pro version. I'm running CM10.1 stock.
Tried it, but it freezes the screen and I can't get to my phone anymore for a while. Then, all of a sudden, it goes back to working. In truth, I've been trying the free version and I don't know if this would happen with the pro version. I'm running CM10.1 stock.
Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
Same here, please if you can update your application as soon as possible for fix with beta 6 faux kernel it will be great.
Sent from my Nexus 4
Same here, please if you can update your application as soon as possible for fix with beta 6 faux kernel it will be great.
Sent from my Nexus 4
He should update his site more often
Are there any place where I could find latest kernels? So I don't have to look through posts in his thread?
the current kernels are beta's thats why its not on the site
Please fix and update your kernel, bponury. We are looking forward your stable-stock-modified kernel. Thank you for your app. What is the different between CM10.1 kernel and stock kernel ?
Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
It's already been reported and acknowledged. Wait for update.
Sent from my Nexus 4 using Tapatalk 2
It's already been reported and acknowledged. Wait for update.
Sent from my Nexus 4 using Tapatalk 2
~_~ is it possible to load the module via the app separately? like if the kernel does not have the module it just loads it self?
Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
Unless he has the free version which I believe isn't updated
Sent from my Nexus 4 using Tapatalk HD
Unless he has the free version which I believe isn't updated
Sent from my Nexus 4 using Tapatalk HD
AW: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
So will there be a update for Stock 4.2.2?
Gesendet von meinem Nexus 4 mit Tapatalk 2
So will there be a update for Stock 4.2.2?
Gesendet von meinem Nexus 4 mit Tapatalk 2
Re: [APP/MOD] TouchControl (a.k.a. PGM Nexus, a.k.a. Slide2Wake) - forget the buttons
New update 22 February still not work with latest faux beta. Anyone meet this issue?
Sent from my Nexus 4
New update 22 February still not work with latest faux beta. Anyone meet this issue?
Sent from my Nexus 4
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
247**** ROOT NEEDED ****
I proudly announce - TouchControl V2
________________ DESCRIPTION
To all who don't know this yet, this is a kernel module with a control application which allows you to perform some gestures that will in turn will execute some action (like simulating power key press or turning volume up).
List of configurable gestures:
- slide - move finger (or fingers) on the screen in some way
- pinch - pinch screen with two or more fingers
- tap - tap the screen with one or more fingers in some place of the screen (or any place)
List of configurable actions:
- press POWER
- press VOLUME UP
- press VOLUME DOWN
- increase BRIGHTNESS
- decrease BRIGHTNESS
- play NEXT SONG
- play PREVIOUS SONG
- press HOME BUTTON
- press BACK BUTTON
________________ SCREENSHOTS
________________ FAQ
- will it work on kernel X
It is made to work on stock kernel. It might work on kernels which are close to stock. I will however try to find a way to make it as compatible as possible. I'm going to assume that you can safely try this mod on your kernel (but don't enable set-on-boot) worst case scenario is a reboot.
- does this consume battery
Short answer - Maybe.
Long answer - this might bring some drain, some users report quite a big battery drain some not, I will address this issue in some time. Check yourself how much an issue it is for you. Also this change from device to device so there is no short answer (look up)
- will it break my touchscreen
Short answer - No
Long answer - Digitizer is not mechanical so it shouldn't break. The same mod works for more then 2 years on my Galaxy Nexus and it never lost a bit of it's responsiveness
- why do I have to pay
Why did you pay for your phone? You did save a few bucks on the phone which was cheap. Now is your chance to make those savings worthy
- if I want to marry you where can I find you?
Oh... this question meant to go somewhere else ;P And I'm taken.
________________ DOWNLOADS
FREE: https://play.google.com/store/apps/details?id=me.paranoid.touchcontrolfree
PRO-TURBO: https://play.google.com/store/apps/details?id=me.paranoid.touchcontrol
________________ DISCLAIMER
THIS IS HIGHLY EXPERIMENTAL AND ALWAYS BE - PLEASE USE AT YOUR OWN RISK!
________________ HOW TO UPDATE
- Uninstall the app
- Reboot device
- Install fresh from play store
.
.
.
.
.
.
.
XDA:DevDB Information
TouchControl, a Tool/Utility for the Google Nexus 4
Contributors
bponury
Version Information
Status: Beta
Created 2013-10-03
Last Updated 2014-03-2240_____________________ CHANGELOG _____________________
- v1.8.1 - 2013-08-17
- fixed load issues and disappearing modules
- fixed 4.2.2 support for Franco kernels (please note that there will be no more updates to 4.2.2)
- v1.8.0 - 2013-08-16
- added support for some 4.3 kernels
- switched to online module downloading instead of in-app modules (thus internet access is required)
- added update/refresh feature for module update checking (top-right refresh icon)
- v1.7.5 - 2013-07-06
- Fixed notification bar pulldown issue
- Maybe it's not necessary anymore to do an uninstall to do update...
- v1.7.4 - 2013-06-19
- THIS WILL NOT WORK ON FRANCO MILESTONE 2 - PLEASE USE NIGHTLY
- added (again) disabling touchscreen in phone call
- fixed support for latest kernels
- screen freezes seem to be fixed
- v1.7.3 - 2013-06-06
- another attempt to fix screen freezes
- fixed support for Faux beta and PA kernel
- removed phone state receiver (TC is active during calls!)
- v1.7 - 2013-05-29
- fixed support for Franco kernel nightly 143
- fixed support for Air Kernel #10
- fixed support for HellsCore
- fixed support for ParanoidAndroid kernel
- another attempt to fix screen freezes
- v1.6 - 2013-03-24
- added auto stock-modified kernel flashing option
- disabled input filtering (might help with screen freezes)
- v1.5e - 2013-03-04
- added support for latest Trinity kernels
- modified some guts, might work with more kernels
- v1.5c - 2013-02-27
- fixed support for latest faux stable
- added permissions for SU
- v1.5b - 2013-02-22
- fixed support for 4.2.2 Franco, Motley, Trinity and Faux
- fixed support for 4.2.2 Franco, Motley, Trinity and Faux
- v1.5a - 2013-02-09
- fix for matr1x kernel
- v1.5 - 2013-02-06
- add support for faux beta kernel
- fix proximity bug during call
- v1.4 - 2013-01-30
- fix support for franco kernels
- v1.3 - 2013-01-26
- fix major bug with input subsystem with version 1.2
- fix major bug with input subsystem with version 1.2
- v1.2 - 2013-01-26
- added motley kernel support
- small fixes
- v1.1 - 2013-01-22
- fixes for start-on-boot
- added more custom kernels support (franco, faux, matr1x, trinity)
- v1.0 - 2013-01-17
- initial release
29I am working on a few things at the same time. First is a new version of touchcontrol (and I mean a maaaajor upgrade). Second is the standby-drain problem and I'm gradually getting to know where it lies But it takes time to track because I have to wait a few hours to see if I am going in the right direction. Consider you are walking in the night with a walkie-talkie and can't see a thing. And someone tells you each 5 hours that you either should go left or right That's why it's taking so much time.
New posts
-
-
-
[Question][ADB] How to "adb push" with timestamps like "adb pull -a"
- Latest: anmac1789@gmail.com