[ROM] [CM10] SCHIZOID all-in-one (CM10+AOKP M1+PA 2.55) [06MAR13 v1.20]

Search This thread

shumash

Senior Member
Jun 1, 2008
1,782
2,813
Google Pixel 3

35mfbr5.gif

This ROM is a combination of all Super ROMs Available
Paranoid + AOKP+ Cyanogen = SCHIZOID

SCHIZOID is based on AOSP+CM source codes, stock kernel, and has all
the stability of CM, the ROM control of AOKP, and the UI customization of PA..

FEATURES

  • FULLY compiled from source with custom kernel.
    Hardware Acceleration
    Color-splash for nav-bar and apps!
    Backup and Restore of PA settings
    Expanded Desktop
    AOKP ROM Control
    Latest Android gesture (swype-like) keyboard
    LMT Pie Control Launcher in Settings
    Battery Statistics
    Current with CM10 repo
    Contains all features of CM10 and PA 2.55 and some of AOKP

Why Choose When You Can Have It All-In-One !!


SCREENSHOTS

2mwyql1.jpg
[
4t0emx.jpg

INSTRUCTIONS TO FLASH

  • - Make A Backup
    - First time users only: If you're currently running a non-CM10 ROM, do a full wipe (factory reset & system)
    - Wipe cache and dalvik
    - Flash ROM And Gapps
    - Reboot
USER NOTES/BUGS
  • Everything works including camera, gyroscope, sound, accelerometer, battery stats, etc.!
  • You should expect conflicts between the various ROM controls, especially the UI controls between AOKP and PA.
  • For first time users after bootup:

    Settings > System > Navigation Bar >Tablet UI soft buttons, check

    Settings > Rom Control > General UI > Show Menu UI Overflow (otherwise there is no way to enable MTP, open browser settings, wifi settings, etc)
    Settings > Storage> Menu (three-buttons at top right)-> USB Computer Connection > Media device (check MTP)to make sure your TP usb charges properly. I had to go into portrait to see the three buttons. It should already be checked
  • To get softkey buttons in navbar, go to Settings->System->Navigation bar->Tablet UI soft buttons (check)
  • AOKP tablet UI setting overrides PA's.
  • To set phablet or phone mode, first uncheck AOKP's setting:
    Settings->ROM Control->General UI->Force Tablet UI
    then
    Launch option at Settings->Paranoid Settings, pick your UI
    Use the Pie Launcher in phone mode
  • PA UI reboots may shutdown or hang. Just reboot, i.e. hold power key to restart if shutdown, power and menu keys if hung.
  • tbob's WebOS Switcher app works.Updated WebCM10 for Schizoid 01/12/13 but you will have to reconfigure the systemui.apk each time you change modes.
  • LMT Pie Control in settings allows PA 2.99-like pie launcher (with permission noname81)
  • Using the Touchstone charger is funky. If you have problems with the tablet not charging, go to Settings > Storage > Menu (three-buttons at top right)-> USB Computer Connection > Media device (MTP), disable MTP, enable camera mode, then re-enable MTP. This also works with usb charging problems.
  • If you don't want my SCHIZOID bootanimation, get AFAinHD's Beautiful Boot! here..
  • Complete guide to ParanoidAndroid Preferences
  • Guide to AOKP ROMControl
  • Pie Control Tutorial
  • Tell me!

    Roll Your Own ROM
    SCHIZOID Build Instructions


Download Link

SCHIZOID 06MAR: Latest Build Link

FOR TESTING ONLY!!! If you want the overclocked kernel, Read this post first. Download and flash the OC'd kernel from there

Mirrors:
http://www.filefactory.com/file/5nrreg41zalx/n/skz_tenderloin-1_20_jb-06MAR2013-jcsullins-220954_zip

Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip

CREDITS
  • CM, PAC, AOKP and PA Team Members
  • -SGA- for lots of encouragement and help
  • tbob for his work in fixing the ParanoidPreferences application
  • nicsptl for his work in porting camera
    and power fixes
  • jcsullins for his continuing support to us troglodytes
  • Dorregaryfor his work on improving the device capabilities
  • noname81 for his LMT Pie Launcher
  • mateorod who has been my mentor.

CHANGELOG
Code:
-> 19MAR2013
   - Kernel recompiled with up to 2157MHz overclocking frequencies, 
     and more efficient SHA1 encryption algorithms to reduce boot time.
   - Merge upstream
-> 06MAR2013
   - Recompiled with jcsullins wifi and standby power fixes
   - Merge upstream
-> 04MAR2013
   - Fixed PA modes
-> 18FEB2013
   - add line to build.prop to enable MTP on boot
   - update skz power_profile.xml with some of Dorregary's parameters
   - add Dorregary's sensor mod's to forked tenderloin device source
   - apply Dorregary's sensor mod to stock kernel
-> 11FEB2013
   - hide LMT Pie Control in drawer to prevent inadvertent uninstall
   - apply urandom entropy mod to stock kernel
-> 09FEB2013
   - provide LMT Pie Control in Settings
-> 07FEB2013
   - Include LMT1.9 as pre-installed pie control
   - Change default images to skz
   - Merge upstream
-> 01FEB2013
   - Fixed battery statistics display in Settings->Battery
   - Merge upstream
-> 22JAN2013
   - Fixed ParanoidPreferences and Performance Control applications.
   - Merge upstream.
-> 12Jan2013 Revisions to paranoid preferences to stop systemUI FC
-> 10Jan2013   
   - Fully functional ROMControl package app
   - Added init.d script to create frequency table in /data/local
   - Power draw in standby fixed
-> 09Jan2013   Modified ROMControl package fix setting of CPU frequencies
-> 07Jan2013   Fully compiled code with working camera and Android gesture keyboard.
-> 14Dec2012   Add link to ported camera ROM (Many thanks to [URL="http://xdaforums.com/member.php?u=4444163"]nicsptl[/URL]
-> 13Dec2012   Faulty compiled ROM removed.  Previous good port restored
-> [COLOR="Silver"]12Dec2012   Fully compiled from sources.  Merge with ParanoidAndroid. Miscellaneous bug fixes[/COLOR]
-> 10Dec2012:  Add flashable custom bootanimation download
-> 03Dec2012:  Replace DeskClock.apk with working apk to stop FC's
-> 02Dec2012:  Initial upload
 
Last edited:
S

-SGA-

Guest
Way too cool! I am gonna try this asap!

Also, you should set up a donations button ;)

Sent from my SAMSUNG-SGH-T989 using xda premium
 
Last edited:

xXblastingXx

Member
Mar 2, 2011
37
5
Awesome bro... more roms... thank you guys for your hard work... Im downloading it

Sent from my cm_tenderloin using XDA Premium HD app
 

islubio

Senior Member
Mar 28, 2010
69
0
Btw guys how to I enable the on screen keys(IE the back, home and menu button on the lower left hand corner)?
 

tbob18

Senior Member
Jul 24, 2007
828
352
Chicago
www.flickr.com
Wow, awesome! Works great so far. :)

Edit:
The way the app switcher works in tablet mode is more like 4.1, not like in PA/4.2.. I don't think I'll be able to port WebCM10 for now.
 
  • Like
Reactions: shumash

Stryeguy

Senior Member
Mar 30, 2009
226
63
Btw guys how to I enable the on screen keys(IE the back, home and menu button on the lower left hand corner)?

Go into Paranoid settings and convert System UI from Phablet to Tablet UI.

Then, go into AOKP settings and enable "Force Tablet UI" to enable the on-screen buttons.

(At least that's what I did.)
 

shumash

Senior Member
Jun 1, 2008
1,782
2,813
Google Pixel 3
Updated ROM and OP

The OP link has updated info. and a link that fixes the clock FC's. If you don't want to reflash, you can copy the DeskClock.apk from a working ROM (I used PA 2.99, but jcsullins CM10 should work) and replace the one in system/app. Reboot and the FC's are gone.
 
Last edited:

c19932

Senior Member
Jun 9, 2010
1,407
152
Google Pixel 6
how did you manage to have transparent status bar/nav bar? When I try to set the color of the status bar, there are no buttons to confirm changes
 

kpyhere

Senior Member
Jul 26, 2009
330
106
Does thia rom support connecting a USB stick for a 3G network connection ?
If not, can it be included in the next update ?
 

c19932

Senior Member
Jun 9, 2010
1,407
152
Google Pixel 6
Turn it portrait style when applying the changes.
:good:

thanks. 2 more questions...

1) anyone got dolphin browser beta working on this rom? mine closes itself immediately after I open it.

2) the status bar seems to cover whatever app is open at the moment. For example, if you open settings, you can see that part of the top is covered by the status bar. is anyone else experiencing the same?
 

cornishrefugee

Senior Member
Aug 19, 2011
53
7
los angeles
Lenovo Legion Y700
Go into Paranoid settings and convert System UI from Phablet to Tablet UI.

Then, go into AOKP settings and enable "Force Tablet UI" to enable the on-screen buttons.

(At least that's what I did.)

I tried this and it didn't work for me. Have tried rebooting a few times, enabling and disabling again etc etc, no dice. Anyone got any other suggestions?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 121

    35mfbr5.gif

    This ROM is a combination of all Super ROMs Available
    Paranoid + AOKP+ Cyanogen = SCHIZOID

    SCHIZOID is based on AOSP+CM source codes, stock kernel, and has all
    the stability of CM, the ROM control of AOKP, and the UI customization of PA..

    FEATURES

    • FULLY compiled from source with custom kernel.
      Hardware Acceleration
      Color-splash for nav-bar and apps!
      Backup and Restore of PA settings
      Expanded Desktop
      AOKP ROM Control
      Latest Android gesture (swype-like) keyboard
      LMT Pie Control Launcher in Settings
      Battery Statistics
      Current with CM10 repo
      Contains all features of CM10 and PA 2.55 and some of AOKP

    Why Choose When You Can Have It All-In-One !!


    SCREENSHOTS

    2mwyql1.jpg
    [
    4t0emx.jpg

    INSTRUCTIONS TO FLASH

    • - Make A Backup
      - First time users only: If you're currently running a non-CM10 ROM, do a full wipe (factory reset & system)
      - Wipe cache and dalvik
      - Flash ROM And Gapps
      - Reboot
    USER NOTES/BUGS
    • Everything works including camera, gyroscope, sound, accelerometer, battery stats, etc.!
    • You should expect conflicts between the various ROM controls, especially the UI controls between AOKP and PA.
    • For first time users after bootup:

      Settings > System > Navigation Bar >Tablet UI soft buttons, check

      Settings > Rom Control > General UI > Show Menu UI Overflow (otherwise there is no way to enable MTP, open browser settings, wifi settings, etc)
      Settings > Storage> Menu (three-buttons at top right)-> USB Computer Connection > Media device (check MTP)to make sure your TP usb charges properly. I had to go into portrait to see the three buttons. It should already be checked
    • To get softkey buttons in navbar, go to Settings->System->Navigation bar->Tablet UI soft buttons (check)
    • AOKP tablet UI setting overrides PA's.
    • To set phablet or phone mode, first uncheck AOKP's setting:
      Settings->ROM Control->General UI->Force Tablet UI
      then
      Launch option at Settings->Paranoid Settings, pick your UI
      Use the Pie Launcher in phone mode
    • PA UI reboots may shutdown or hang. Just reboot, i.e. hold power key to restart if shutdown, power and menu keys if hung.
    • tbob's WebOS Switcher app works.Updated WebCM10 for Schizoid 01/12/13 but you will have to reconfigure the systemui.apk each time you change modes.
    • LMT Pie Control in settings allows PA 2.99-like pie launcher (with permission noname81)
    • Using the Touchstone charger is funky. If you have problems with the tablet not charging, go to Settings > Storage > Menu (three-buttons at top right)-> USB Computer Connection > Media device (MTP), disable MTP, enable camera mode, then re-enable MTP. This also works with usb charging problems.
    • If you don't want my SCHIZOID bootanimation, get AFAinHD's Beautiful Boot! here..
    • Complete guide to ParanoidAndroid Preferences
    • Guide to AOKP ROMControl
    • Pie Control Tutorial
    • Tell me!

      Roll Your Own ROM
      SCHIZOID Build Instructions


    Download Link

    SCHIZOID 06MAR: Latest Build Link

    FOR TESTING ONLY!!! If you want the overclocked kernel, Read this post first. Download and flash the OC'd kernel from there

    Mirrors:
    http://www.filefactory.com/file/5nrreg41zalx/n/skz_tenderloin-1_20_jb-06MAR2013-jcsullins-220954_zip

    Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip

    CREDITS
    • CM, PAC, AOKP and PA Team Members
    • -SGA- for lots of encouragement and help
    • tbob for his work in fixing the ParanoidPreferences application
    • nicsptl for his work in porting camera
      and power fixes
    • jcsullins for his continuing support to us troglodytes
    • Dorregaryfor his work on improving the device capabilities
    • noname81 for his LMT Pie Launcher
    • mateorod who has been my mentor.

    CHANGELOG
    Code:
    -> 19MAR2013
       - Kernel recompiled with up to 2157MHz overclocking frequencies, 
         and more efficient SHA1 encryption algorithms to reduce boot time.
       - Merge upstream
    -> 06MAR2013
       - Recompiled with jcsullins wifi and standby power fixes
       - Merge upstream
    -> 04MAR2013
       - Fixed PA modes
    -> 18FEB2013
       - add line to build.prop to enable MTP on boot
       - update skz power_profile.xml with some of Dorregary's parameters
       - add Dorregary's sensor mod's to forked tenderloin device source
       - apply Dorregary's sensor mod to stock kernel
    -> 11FEB2013
       - hide LMT Pie Control in drawer to prevent inadvertent uninstall
       - apply urandom entropy mod to stock kernel
    -> 09FEB2013
       - provide LMT Pie Control in Settings
    -> 07FEB2013
       - Include LMT1.9 as pre-installed pie control
       - Change default images to skz
       - Merge upstream
    -> 01FEB2013
       - Fixed battery statistics display in Settings->Battery
       - Merge upstream
    -> 22JAN2013
       - Fixed ParanoidPreferences and Performance Control applications.
       - Merge upstream.
    -> 12Jan2013 Revisions to paranoid preferences to stop systemUI FC
    -> 10Jan2013   
       - Fully functional ROMControl package app
       - Added init.d script to create frequency table in /data/local
       - Power draw in standby fixed
    -> 09Jan2013   Modified ROMControl package fix setting of CPU frequencies
    -> 07Jan2013   Fully compiled code with working camera and Android gesture keyboard.
    -> 14Dec2012   Add link to ported camera ROM (Many thanks to [URL="http://xdaforums.com/member.php?u=4444163"]nicsptl[/URL]
    -> 13Dec2012   Faulty compiled ROM removed.  Previous good port restored
    -> [COLOR="Silver"]12Dec2012   Fully compiled from sources.  Merge with ParanoidAndroid. Miscellaneous bug fixes[/COLOR]
    -> 10Dec2012:  Add flashable custom bootanimation download
    -> 03Dec2012:  Replace DeskClock.apk with working apk to stop FC's
    -> 02Dec2012:  Initial upload
    12
    Updated ROM 01FEB13 Available

    I've posted an updated ROM that merges upstream and is now the first, and only, TP CM9 or CM10 ROM with working battery statistics in Settings. Not a big deal, but every little thing that makes this a complete ROM is a victory. No other changes in operation so you can probably flash it without cleaning caches, although for the little extra time it takes, I don't recommend it. Enjoy.
    11
    Re: [ROM][JB 4.1.2][06MAR13 v1.20] SCHIZOID all-in-one (CM10+AOKP M1+PA 2.55)

    What's up everyone? Hope you are enjoying your evening. I'm just gonna leave these here for now.

    View attachment 1798696View attachment 1798698
    zudamy6a.jpg


    Sent from my skz_tenderloin using Tapatalk HD
    10
    [UPDATED ROM] SCHIZOID 1.1 Available

    I have uploaded an updated ROM complete with a fixed ParanoidPreferences application and upstream commits. For those of you who haven't noticed, there is a comprehensive CPU performance application called Performance Control pre-installed. The CPU frequency slider settings now work it in the same manner as ROMControl. Additionally, tbob's latest WebOS Switcher works with this version. Enjoy!
    10
    UPDATE: 18FEB13 v1.13 ROM Available

    I've uploaded an update that incorporates Dorregaray's improvements to the device sensors (Gyroscope Patch), adds automatic selection of MTP to build.prop, and updates the battery power_profile.xml previously in the ROM. Enjoy.