[ROOT+TWRP 2.7.1.0] Auxus Note 5.5 / Elephone P2000 / MLAIS NOTE PRO (SPFT Method)

Search This thread

techsekhar

New member
Mar 5, 2015
3
0
Hi

hi
I've rooted my phone as per your instructions, everything gone well
but after root I've done 'factory reset'
after that my power on/off switch is not working for screen on/off
option power on/off is working
my screen is continuously on (I used Original stock recovery also-no change)
battery is draining too fast I've used all other options, searched including forums
plzz help to get rid out of this situation and bring back my phone to original factory settings

Mr.Mahendra, plzz help me to get rid out of this situation
sekhar
 
Last edited:

techsekhar

New member
Mar 5, 2015
3
0
"I've rooted my phone as per your instructions, everything gone well
but after root I've done 'factory reset'
after that my power on/off switch is not working for screen on/off
option power on/off is working
my screen is continuously on (I used Original stock recovery also-no change)
battery is draining too fast I've used all other options, searched including forums
plzz help to get rid out of this situation and bring back my phone to original factory settings

Mr.Mahendra, plzz help me to get rid out of this situation
sekhar

I finally found a solution, might be useful
whole thing is caused due to:
after rooting what I have done is edited boot animation file in /system/media
I restarted phone several times, nothing happened but when I do phone reset
My phone is always awake and my power button is also not worked for putting phone into sleep
sol is before editing boot animation file, i've taken backup
Restored original boot animation file in its original location
restarted phone and every thing is normal my power button is working fine for sleep and awake

this all was done through ES file explorer (tools/root)

sekhar
 

cmahendra

Inactive Recognized Contributor
Jan 20, 2012
3,843
4,890
Mumbai
hi
I've rooted my phone as per your instructions, everything gone well
but after root I've done 'factory reset'
after that my power on/off switch is not working for screen on/off
option power on/off is working
my screen is continuously on (I used Original stock recovery also-no change)
battery is draining too fast I've used all other options, searched including forums
plzz help to get rid out of this situation and bring back my phone to original factory settings

Mr.Mahendra, plzz help me to get rid out of this situation
sekhar
This is stock rom rooting thread , May be your download file is corrupted. Try re-downloading stock rom and attempt 2/3 flashes and then try rooting. should work.


"I've rooted my phone as per your instructions, everything gone well
but after root I've done 'factory reset'
after that my power on/off switch is not working for screen on/off
option power on/off is working
my screen is continuously on (I used Original stock recovery also-no change)
battery is draining too fast I've used all other options, searched including forums
plzz help to get rid out of this situation and bring back my phone to original factory settings

Mr.Mahendra, plzz help me to get rid out of this situation
sekhar
I finally found a solution, might be useful
whole thing is caused due to:
after rooting what I have done is edited boot animation file in /system/media
I restarted phone several times, nothing happened but when I do phone reset
My phone is always awake and my power button is also not worked for putting phone into sleep
sol is before editing boot animation file, i've taken backup
Restored original boot animation file in its original location
restarted phone and every thing is normal my power button is working fine for sleep and awake
this all was done through ES file explorer (tools/root)
sekhar
Don't know how this is related to rooting. Rooting is nothing to do with bootanimation. But if that solved your problem, then congrats :) keep experimenting.
 

techsekhar

New member
Mar 5, 2015
3
0
hi again

Mr Mahendra
Inspired by you
thanks for your suggestion
i will keep on experimenting on this...

-SEKHAR
 

pratik2861999

Member
Oct 2, 2014
15
0
Anantapur, AP
PMT changed for the ROM; it must be downloaded

@cmahendra Sir what is this error?

And could you please tell me its possible solution....

I am on company's stock latest ROM and you scatter file given for recovery flashing....

Please help me out..... :crying: :( :crying: :crying: :crying: :crying: :crying: :( :( :( :( :( :(
 
Last edited:

shaikhmdjohar

Member
Apr 14, 2014
6
0
Hi everyone. .

I have flashed my 5.5 note by spf tool by
Format and download option.

Everything gone well but after successful boot, my phone failed to search sim networks.

I searched for network manually but it fails to register and error message pops up..

" Can't connect to this network right now. Try again later."

Help is needed from every genius...

Johar.
 

cmahendra

Inactive Recognized Contributor
Jan 20, 2012
3,843
4,890
Mumbai
Hi everyone. .

I have flashed my 5.5 note by spf tool by
Format and download option.

Everything gone well but after successful boot, my phone failed to search sim networks.

I searched for network manually but it fails to register and error message pops up..

" Can't connect to this network right now. Try again later."

Help is needed from every genius...

Johar.

Dont panic, its common issue with chinese phone. You lost IMEI. Just restore IMEI.

https://www.facebook.com/photo.php?fbid=10202833707709389

 

shaikhmdjohar

Member
Apr 14, 2014
6
0
Mr. Mahendra
Your Facebook link seems broken...

Please guide process to restore IMEI.
Thanks for quick response and help..
Johar
 
Last edited:

lsiddu

New member
Jan 16, 2016
1
0
Hello C Mahendra ji, i am using iberry auxus note5.5 i am faceing problem when i press Power button, then Display will not work, but when i remove my screen lock or removed battery insert it again and reboot means display will properly, i have visited near service center, they said display is gone, its around Rs.8000/- Can you please help for this, replay me on this mail, lsiddu2016@gmail.com, I am excepting solution from you sir, Kindly help me
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    ***Root with SPFT Flash Tool Method***
    for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
    [EASY ROOT METHOD] :)


    Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
    Finally this root perfect root method was possible due to SPFT version of Stock Rom

    Installation Instructions

    Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.

    1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard

    2) Download and install Phone Driver / Universal Android USB Drivers (if any).

    3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .

    After installation is done disconnect phone from pc.

    Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.

    3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
    ------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
    ------- Download for Mlais Note Pro
    ------- Download for Elephone P2000

    4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.

    5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.

    Now PRESS "Download" button at top.

    6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.

    After flashing is done, the GREEN tick mark will be shown as shown in image below.

    7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.

    To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.

    8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode

    Done. Enjoy :) Press thanks if you liked my work.

    IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.

    attachment.php



    3
    Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
    I am glad to see first person who rooted with the help of my tutorial and files. :) That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. :) Will be around for more developement and roms. :)
    3
    I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
    Seems drivers are not properly installed. These are new drivers by iBerry.

    1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
    2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
    3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
    4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
    5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
    6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.

    Hope this helps and inform if works.

    PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.
    2
    ]I have rooted by iberry-auxus note 5.5 as per your guidance.
    But the USB DRIVER not correctly installed.
    I have updated the driver through device manager
    My operating system is windows 7 ultimate x64
    Everything went smooth as you instructed
    Thank you for developing this guide to root the model.
    :victory:
    The USB DRIVERS can be downloaded from
    http://xdaforums.com/showthread.php?t=2180436
    I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with

    "Searching drivers for YunOS system"

    and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like

    "YunOS ACB Interface"

    Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)

    So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.

    while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
    http://n2k1.com/n2k1/ELEPHONE_P2000/
    Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
    Working fine on our auxus 5.5 note.
    Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode. :)
    flashing the preloader is not necessary though is it?
    No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms :)
    hi mahendra .this is great .didn't expect rom development on fast track so soon .
    going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
    thanks.:good:
    YEAH! I am always around in XDA, for the phone in my hand :D Thanks for appreciation :)
    1
    Thanks

    Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.