[Q] Get to stock rom (no ruu)

Search This thread

alon121

Member
Jan 24, 2014
6
0
Hello
i dont have RUU for my cidnum (T-MOB101)
I want to get to stock rom.
currently im with Sinless ROM.
- if i change my cid what are the consequences? is it reverseable?

about nandriod:
-how do i use it ?
-if i use it my phone will be completely stock?

if u have a guide that explains step by step what should it will help alot!
Thanks!

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4D.18.3250.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
 

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
Hello
i dont have RUU for my cidnum (T-MOB101)
I want to get to stock rom.
currently im with Sinless ROM.
- if i change my cid what are the consequences? is it reverseable?
There is no consequences and this is reversible. The CID and MID must match the ruu you want to use

about nandriod:
-how do i use it ?
-if i use it my phone will be completely stock?
push the nandroid to the backup path (the path might require to be generated 1st by doing a backup of what you have). then restore from custom recovery. /data/media/0/TWRP/BACKUPS/YOUR_SN/YOUR_BACKUP_FOLDER

if u have a guide that explains step by step what should it will help alot!
Thanks!

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4D.18.3250.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

You have S-OFF, you can restore your phone to any stock version with a ruu! You only have to change CID and maybe MID...
You could use the international .401 ruu or .1540 dev edition.
 

alon121

Member
Jan 24, 2014
6
0
There is no consequences and this is reversible. The CID and MID must match the ruu you want to use


push the nandroid to the backup path (the path might require to be generated 1st by doing a backup of what you have). then restore from custom recovery. /data/media/0/TWRP/BACKUPS/YOUR_SN/YOUR_BACKUP_FOLDER



You have S-OFF, you can restore your phone to any stock version with a ruu! You only have to change CID and maybe MID...
You could use the international .401 ruu or .1540 dev edition.

thanks for the answer,

do u know if ill install the ruu my warranty will be ok?
 

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
thanks for the answer,

do u know if ill install the ruu my warranty will be ok?

no, if you send your phone for warranty you'' need to be 100% stock t-mobile. In this case you'll have to restore a nandroid backup, reset the bootloader tampered flag, turn the bootload to LOCKED (not RELOCKED), flash a firmware.zip with the stock recovery, and turn back S-ON
 
Last edited: