[ROM][CM10][Jan.1, 2013][DISCONTINUED] CyanogenMOD 10 "SE" v2.2

Search This thread
By:
Advanced…
jedi5diah

jedi5diah

Senior Member
Aug 4, 2010
283
17
rawdealer said:
You need to update your hboot, because it's new 3.1.10 kernel. :good:

How to upgrade hboot via fastboot:

First-----backup everything! ROM, apps etc etc and SD!!! Copy SD content to your computer, because it's very possible that SD will be erased. I've upgraded from 0.94 ---> 1.39 and my SD, recovery were stay untouched. My friend did it from 1.12 ----> 1.39 and his SD and recovery were erased. Just in case ;)

fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip (if you get error on this line enter command again!!! Immediately!)
fastboot flash unlocktoken unlock_code.bin (you need your unlock code to unlock bootloader again)
fastboot flash recovery - you already know that ;)
fastboot flash boot - you already know that ;)

flash rom and gapps in recovery - you already know that ;)

that's it :cyclops:


firmware with 1.39 hboot: http://htcfanboys.com/download/rawdealer/?action=view&file=16339
Click to expand...
Click to collapse

i can simply flash this firmware when my hboot is 0.94?

thanks.
 
theDroidfanatic

theDroidfanatic

Senior Member
Apr 24, 2012
7,552
5,729
Jeddah
www.twitter.com
Re: [ROM][CM10][Jan.1, 2013] CyanogenMOD 10 "SE" v2.2

seadersn said:
all right, here it is: public testbuild before opening a new thread :)

FACTORY RESET RECOMMENDED!!
HBOOT 1.3x urgently needed, so finally it's time now to upgrade your firmware ;)

changes to last version:
kernel config edited: added LZO / zlib algos, enabled KSM, noop / ondemand (was standard before, just for info), UV, s2w, and some more stuff /detailed info will follow)
updated to latest upstream (have a look @ version number ROFL)
slightly higher vib feedback
recent tasks killall button changed to bottom left
colored adb output
deskclock / voicedialer / superuser / su from cm 10.1

DOWNLOAD

have fun :)



last versions changelog

  • most of my tweaks, which are included in this build, and:
  • ROM is ODEXed
  • added phone additional settings, needed for added
  • t9 dialer
  • added recent app preview "killall" button
  • added vol cursor mod
  • added cm hw keys rebinding options (fixed, assist key deactivated)
  • added camera extensions
  • added increasing ringtone option
  • added cm filemanager
  • added chronus (weather deskclock), settings in display settings
  • added quick settings mod (use app in drawer to configure quick settings tab)
  • latinime from cm10.1
  • init.d support
  • sim toolkit
  • changed some icons (thx raw ;))
  • made system partition r/w by default
Click to expand...
Click to collapse

Thanks!

Would you still mandate a full wipe if coming from the previous beta?

Also, if you need someone to design the OP layout or something, I can help xP

Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
 
  • Like
Reactions: seadersn
theDroidfanatic

theDroidfanatic

Senior Member
Apr 24, 2012
7,552
5,729
Jeddah
www.twitter.com
Re: [ROM][CM10][Jan.1, 2013] CyanogenMOD 10 "SE" v2.2

seadersn said:
would be better, jep :) but now as 4.2.2 is out... xD a new build will follow hrhr ;)
@OP: YES!! sure, this would be great :) i'll contact you via pm when it's about time etc :D
Click to expand...
Click to collapse

Thanks :D I'll wait for that 'new' build then ;)

Alright, hope to give it a nice rehaul ;)

Cheers! :D

Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
 
shiverz07

shiverz07

Senior Member
May 7, 2012
451
287
Durban, South Africa
rawdealer said:
You have to enter 4 commands....
Click to expand...
Click to collapse

eyosen said:
It only looks that way. I've done it in less than an hour and that includes locking, upgrading firmware from 0.94,unlocking,flashing custom recovery and restoring my nandroid.
Click to expand...
Click to collapse

I'm still a noob at all this... :angel:

fastboot oem lock - easy
fastboot oem rebootRUU - easy
fastboot flash zip firmware.zip - The firmware that was downloaded must be in the fastboot directory folder and called 'firmware.zip'. Right?
fastboot flash unlocktoken unlock_code.bin (you need your unlock code to unlock bootloader again) - This is the same bin file I initially used to unlock the phone?
fastboot flash recovery - This is the same recovery file I initially used when I rooted the phone?
fastboot flash boot (boot.img?) - Like when I normally flash the image of a new rom?

flash rom and gapps in recovery - As per usual?
 
theDroidfanatic

theDroidfanatic

Senior Member
Apr 24, 2012
7,552
5,729
Jeddah
www.twitter.com
Re: [ROM][CM10][Jan.1, 2013] CyanogenMOD 10 "SE" v2.2

shiverz07 said:
I'm still a noob at all this... :angel:

fastboot oem lock - easy
fastboot oem rebootRUU - easy
fastboot flash zip firmware.zip - The firmware that was downloaded must be in the fastboot directory folder and called 'firmware.zip'. Right?
fastboot flash unlocktoken unlock_code.bin (you need your unlock code to unlock bootloader again) - This is the same bin file I initially used to unlock the phone?
fastboot flash recovery - This is the same recovery file I initially used when I rooted the phone?
fastboot flash boot (boot.img?) - Like when I normally flash the image of a new rom?

flash rom and gapps in recovery - As per usual?
Click to expand...
Click to collapse

Yes, to all of this :) you've got it all right :D

I would suggest backing up your virtual memory card, should you run into any issues, and remember, the community is here to help, so don't panic if something goes wrong :)

Also, the first flashing of firmware.zip might give an error, so I believe you have to flash it twice together (once, then again right after it) for it to work :)

Cheers :)

PS: the boot.img mentioned should be the boot.img of the Rom you are intending to flash, and the recovery will be CWM/TWRP :)

Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
 
  • Like
Reactions: shiverz07
shiverz07

shiverz07

Senior Member
May 7, 2012
451
287
Durban, South Africa
theDroidfanatic said:
Yes, to all of this :) you've got it all right :D

I would suggest backing up your virtual memory card, should you run into any issues, and remember, the community is here to help, so don't panic if something goes wrong :)

Also, the first flashing of firmware.zip might give an error, so I believe you have to flash it twice together (once, then again right after it) for it to work :)

Cheers :)

PS: the boot.img mentioned should be the boot.img of the Rom you are intending to flash, and the recovery will be CWM/TWRP :)

Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
Click to expand...
Click to collapse

Sweet man. Thank you for confirming so quickly. My firmware was listed so I downloaded already. Off to watch the Madrid United game now so I might only get round to doing all this tomorrow evening though. Or should I just wait for 4.2.2? :silly:
 
  • Like
Reactions: theDroidfanatic
rawdealer

rawdealer

Senior Member
Mar 17, 2011
2,883
1,965
District 1
OnePlus 6
OnePlus 7T
Re: [ROM][CM10][Jan.1, 2013] CyanogenMOD 10 "SE" v2.2

shiverz07 said:
Sweet man. Thank you for confirming so quickly. My firmware was listed so I downloaded already. Off to watch the Madrid United game now so I might only get round to doing all this tomorrow evening though. Or should I just wait for 4.2.2? :silly:
Click to expand...
Click to collapse

I suggest you to flash twrp recovery instead of clockworkmod ;)
 
theDroidfanatic

theDroidfanatic

Senior Member
Apr 24, 2012
7,552
5,729
Jeddah
www.twitter.com
Re: [ROM][CM10][Jan.1, 2013] CyanogenMOD 10 "SE" v2.2

shiverz07 said:
Sweet man. Thank you for confirming so quickly. My firmware was listed so I downloaded already. Off to watch the Madrid United game now so I might only get round to doing all this tomorrow evening though. Or should I just wait for 4.2.2? :silly:
Click to expand...
Click to collapse

You're welcome ;) you can flash this :D





rawdealer said:
I suggest you to flash twrp recovery instead of clockworkmod ;)
Click to expand...
Click to collapse


shiverz07 said:
Why raw?

Sent from my HTC One X using Tapatalk
Click to expand...
Click to collapse

Its the best, themable, easy, EVERYTHING.

Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
 
  • Like
Reactions: shiverz07
You must log in or register to reply here.

Similar threads

mike1986.
[ROM] Android Revolution HD 33.1 | High Quality & Performance | Sense 5 | 4.18.401.3
Replies
50K
Views
9M
C
cmaz
tbalden
[ROM][official] HTC OneX CyanogenMod 10.1 (4.2) release
Replies
16K
Views
3M
IllUMINATUz
IllUMINATUz
m0narx
[ROM][05.06] Team Venom presents: ViperX 4.1.1 - welcome to the future
Replies
26K
Views
4M
izzulhafiz
izzulhafiz
j to the 4n
  • Locked
[ROM] 21.09 Team Venom viperX 2.7.1 - Sense 4.1 | orig. OTA | Tweaks | CPU Control
Replies
12K
Views
2M
Woody
Woody
theDroidfanatic
  • Poll
[ROM][10/SEP] Blade ELITE v2.0 | 288MB | Sense 5 | 4.18.401.2 | Mods
Replies
9K
Views
756K
diabo_bom
diabo_bom

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 70
    seadersn
    seadersn
    time to switch to cm-10.1 ;) no more updates for either cm10 or aosp builds here.


    cm10_se_banner171kcl.png

    Ave, folks :)

    Because the resonance for my own, personal, tweaked build version of CM10 was surprisingly good @official CM10 thread by tbalden and his TeamNDVRu crew, I decided to do a jointventure with rawdealer to provide this build in two version ("standard" and BlackVersion) to you, the XDA community, in a seperated thread. Rawdealer will provide his DarkVersion of this build in second post :)

    This build is based on official CyanogenMod 10 sources, which are to be found here. I've included showp's Bricked kernel sources in my local repos (so sweep2wake is available), to which I did some edits (see changes below). So, as this is based on official CM10, all the bugs, which are present there, may be found here, too. I did no fixups, beside some small commits to CM10 device and kernel trees and except automatic brightness, which was a non-merged, abandoned CM gerrit commit. It works quite well.

    Aim of this build was to make it a little bit more responsive and at the same time battery friendly, faster and do some customization on standard settings wich should be this way by default imo. As it looks, this went well :D

    I will NOT answer standard questions, which are answered already ten times in any other thread and whose answers can be found by just reading the stickies etc :) You should know, what you are doing here and have the basics in mind :) However, a little install guideline (should be followed for best experiences) is added to third post.

    Standard CM disclaimer:
    Code: 
    #include 
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

    If anyone deserves thanks and credits, then
    - tbalden, mdeejay and his crew for the device tree which made it to official CM10 device tree,
    - showp for his work he has done on the 2.17 source bricked kernel v0.7 and
    - CyanogenMod founder Steve Kondik, of course :)
    - If you think, I forgot to include you in this list, please hit me a pm :)

    This build contains the following edits:

    Builds main changes, have a look @changelog, too:​

    1. Build is mostly stock regarding apps and everything else, beside my edits of course ;)
    2. General build changes:
      - Cleaned out goldfish stuff in ramdisk and build
      - 3-4 build.prop edits
      - Disabled mock locations
      - Removed power.endeavoru.so from building
      - Used SuperSU + SuperSU binary
      - Latest version of Terminal Emulator
      - Latest version of RomManager
      - Titanium Backup is included
      - gps.conf edited to Europe
      - Anti-Ads hosts file
      - Added Microbes LiveWallpaper
    3. Kernel changes (only in .config):
      - Bricked kernel sources used
      - No-op scheduler as standard
      - OnDemand governor, as it's the only one which is optimized for showp's new, own, great mpdecision
      - Enabled LZO and ZLIB algos
      - Disabled GPU OC
      - Disabled ZRAM / SWAP
      - Rest is standard: you may have a look @ showp's Bricked AOSP Kernel thread for further details
    4. frameworks:
      - Bigger app preview thumbnail sizes (standard size available via flashable zip @ third post)
      - Smaller app thumbnail description text
      - Device's screen stays off when charger unplugged
      - Custom, darker brightness levels
      - Screen dim set to 10
      - Enabled automatic brightness when light decreases (working w/o custom filtering enabled, too)
      - No wallpaper = black screen: it's up to you to use your fav one ;)
      - Faster animations
      - Lowered vibrations
      - Critical battery level = 4%
      - Low battery warning @ 9%
      - Low battery warning when on charger set to 20%
    5. frameworks / SettingsProvider:
      - Enabled permission to install non-market apps
      - Lowered long press timeout: set to 250ms
      - Enabled automatic screen brightness
      - Set default screen brightness to 50 (standard: 102)
    6. frameworks / SystemUI:
      - Changed default smiley set to original HTC's
    7. MMS / SMS app:
      - Set delivery reports for SMS and MMS to enabled
      - Set QuickMessage to enabled
      - Use Dark Theme for QuickMessage
      - Set Emojis to enabled
      - Set Use full timestamps to enabled
      - Changed default min MMS / SMS messages per thread to 15 / 150
      - Changed min / max messages per Thread to 10 / 500
    8. Settings:
      - Changed Screen timeout entries to 30 / 60 / 90 seconds, rest is standard (translations only for English and German! Other languages will show default values but use mine. Am too lazy to translate all the 50+ languages ;))
      - Lowered system font sizes: Large in this build = Normal in official build, Normal in this build = Small in official build, Small in this build = not present in official and even smaller ;)
      - Lowered long press timeout selector values
    9. LatinIME:
      - Popups disabled
      - Key repeat interval lowered to 60ms
      - Long press timeout lowered to 200ms
      - Long press shift timeout lowered to 200ms
      - Enabled volume cursor keys
    10. Browser:
      - Open tab in background as default
      - Enabled quick controls as default
      - Disabled GeoLocation as default
    Click to expand...
    Click to collapse

    To keep this post clean, I've moved Download and Changelog to third post :)

    Again and as always: I'm not responsible for any damage that may happen to your device when you flashed this. It's your own risk ;)
    ​
    View
    29
    seadersn
    seadersn
    DOWNLOADS and CHANGELOG

    NOTE: Factory reset / Wipe Data is recommended when coming from official CM10 or another version: in every case when there was a Sense ROM installed before ;)
    boot.img reflashing only needed when installed for the first time or it is clearly stated here :)
    Beside that, it's not allowed to put gapps inside a build as they are Google's stuff and closed source. You have to flash them manually, to be found HERE

    Newer hboots: kernel available, but gps wont work.​

    Installation instructions:
    1. Download ROM, of course
    2. Install it the usual way:
      - copy it to your SDCARD
      - install zip in recovery
      - do a Dalvik wipe in Recovery when you want to update this ROM
      - reboot to bootloader
      - flash boot.img which you should have extracted from ROM zip before
      - do a fastboot erase cache, to be on the sure side
      - reboot
    3. Let it boot.
    4. If installed from scratch with no data: Do nothing more than the initial setup the phone wants you to do and then REBOOT!
    5. If installed as update with filled data partition: let it complete its boot and REBOOT after screen turned off (after turning it on again :ugly: )
    6. Reboots are essential for this build for letting some of the additional settings take effect! ;)
    7. Yeah, and then: have fun with it :)


    Changelog:
    • Tue., Jan. 1, 2012 2013 :ugly:
      - v2.2: sry, folks, nothing big, only synced CM10 sources up to 30. Dec. 2012 ;)
      .
      .
    • Mon., Dec. 17, 2012:
      - v2.1: synced CM10 sources up to 13. Dec. 2012
    • Fri., Nov. 16, 2012:
      - v2.0: final version of both SE and CM10 (CM claimed its rom stable; not for our device, but it is :))
      - it's a little bit faster than the last versions ;)
      - this version will be the last version for the next two or three weeks :( i've got too much to do in RL atm, there's almost no time for hobbies like this left
      - lots of fixes by cm team
      - edited tcp buffer values in init.rc: boot.img reflashing is recommended but not really needed
    • Thu., Nov. 08, 2012:
      - v1.2.2: nothing big over 1.2.1, only a fresh sync / build, some CM stuff fixed (filemanager for example)
    • Wed., Nov. 07, 2012:
      - v1.2.1: finally fully working :)
      - synced CM sources to Nov. 6., 10:30pm
      - edited TCP buffersizes
      - disabled s2w (for testing if deactivating is sufficient & helpful @SOD's; when you want to enable it, edit init.d/10ds2w script, change "0" to "1" pls)
      - some fixes for stuff that rendered previous 1.2 unusable
    • Thur., Nov. 02, 2012:
      - v1.1a: just flash directly after main-rom-flash, Dalvik wipe is included in script
      - added missed apks: new Terminal Emulator version, Titanium Backup, RomManager, SuperSU + binary
      - included standard wallpaper
    • Thur., Nov. 01, 2012:
      - v1.1
      - made vibrations a little bit more intensive
      - now there is a standard wallpaper ;) <- sth went wrong -.- will come :)
      - Transition and Animation scale changed (will take effect after first reboot ;))
      - fresh sources from 01. Nov. 18:30h CET, so CM File Manager included
      - reverted back to standard SuperUser
      - forgot titanium backup :(
    • Wed, Oct. 24, 2012:
      - v1.0, initial version


    Downloads:
    1. Version 2.2
      - cm-10-endeavoru-SE-v2.2.zip - HTCFanBoys
      - cm-10-endeavoru-SE-v2.2.zip - DevHost
      - Kernel flashable zip for hboots > 1.12
      - Framework with standard preview size, CWM flashable zip
      .
      .

    2. Version 2.1
      - cm-10-endeavoru-SE-v2.1.zip - HTCFanBoys
      - cm-10-endeavoru-SE-v2.1.zip - DevHost
      - Kernel flashable zip for hboots > 1.12
    3. Version 2.0
      - both downloads working, md5sum: 170e4e8d6dcd2ff060316a002ed15a17
      - cm-10-endeavoru-SE-v2.0.zip - HTCFanBoys
      - cm-10-endeavoru-SE-v2.0.zip - DevHost
      - fixed CMFileManager
    4. Version 1.2.2
      - cm-10-endeavoru-SE-v1.2.2.zip - HTCFanBoys
      - cm-10-endeavoru-SE-v1.2.2.zip - DevHost
    5. Version 1.2.1
      - cm-10-endeavoru-SE-v1.2.1.zip - HTCFanBoys
      - cm-10-endeavoru-SE-v1.2.1.zip - DevHost
    6. Version 1.1 (reflash boot.img pls!)
      - cm-10-endeavoru-SE-v1.1.zip - 182.46 MB - HTCFanBoys - THANK YOU, JO! :)
      - cm-10-endeavoru-SE-v1.1.zip - 182.46 MB - DevHost - THX TO DEVHOST! :)
      - update to 1.1a, Mirror
    7. Version 1.0:
      - cm-10-endeavoru-SE-v1.0.zip - 186.09 MB - HTCFanBoys - THANK YOU, JO! :)
      - cm-10-endeavoru-SE-v1.0.zip - 186.09 MB - DevHost - THX TO DEVHOST! :)


    Additions:

    Banners by us(ers):


    Reviews by us(ers):
    Pls say thx to oddyZR for creating these "little" video previews for us :D First standard ROM preview, second Multitasking tests:


    More stuff will follow (banners) ;)
    View
    25
    rawdealer
    rawdealer
    CyanogenMOD 10 SE My Personal & DarkMod

    Like seadersn said, in this post is the Dark version of his build with some more cleanups*, including some dark system apps and optional dark Google apps.

    This build has included the latest ncx kernel. You need to flash boot.img from zip also, if you're coming from seadersn version, because it has a bricked kernel. No need to flash modules, they're already in the zip.

    You can just wipe cache and dalvik cache w/o problems, but it's highly recomended to do a full wipe for the first time, flash ROM zip and gapps (regular or dark – dark ones have more apps inside zip), and then do everything like it's written below.


    After three 5 minutes recording attempts was phone already a little bit hot :D But...here it is :)

    Change video quality to 720p ;)

    AOSP 4.2.1 r1.2​

    Screenshots

    ↓↓↓↓↓↓↓↓↓↓↓↓

    cm10sephone3.png


    cm10secontacts3.png


    cm10semessaging3.png


    cm10segnow3.png


    cm10sevoice3.png


    cm10secalendar3.png


    cm10segmail3.png


    cm10setalk3.png


    cm10seg3.png


    cm10sestore3.png


    cm10seyoutube3.png






    Dark apps included in system/app

    -Contacts
    -Calendar
    -CM File Manager
    -Gmail 4.2
    -Messaging
    -Phone


    If you want to have some more dark apps in system/app you have to install them manually for the first time, because your regular gapps are excluded while updating ROM.

    This apps are:

    -QuickSearchBox - link
    -Phonesky (Play Store) - link
    -Talk - link


    Dark apps in data/app

    -YouTube - link
    -Google+ - link

    This apps you have to uninstall (just for the first time) before updating ROM, or manually change them after instalation.
    Make a backup of apps with Titanium Backup, uninstall them, install dark versions and restore only data for this apps in Titanium Backup.
    When you'll updating ROM with the new build, you won't need to do this anymore.







    Yet another nice person who let me use his kernel in my version is n3ocort3x with his superb kernel.





    *What have I done:

    Deleted
    -some sounds, changed touch sound to old one, videos, tts, and following apps:
    -CMUpdater.apk
    -CMWallpapers.apk
    -Development.apk
    -Email.apk
    -Exchange2.apk
    -LiveWallpapers.apk and everything related
    -Stk.apk
    -Term.apk
    -VideoEditor.apk
    -VoiceDialer.apk
    -some I forgot....

    Added
    -ncx kernel and modules
    -all the apps listed in the descriptions above
    -and some more stuff I probably forgot :D




    Downloads:

    Every time when you install the new version of ROM, please reboot your phone again when it boots, for letting some of the additional settings to take effect!



    Version 2.2 - 20121230


    My personal version 2.2 - what I'm running on my phone - cleaned SE ROM with normal (NON-DARK) apps & ncx kernel




    If you want to install Black gapps, you can flash them in recovery. All dark applications are made by TUN_SD

    Download: CM10 Inv.Gapps+JellyBlack_Theme





    DarkMod v1.3 With ncx v12 kernel - I've found it better than v13



    Darkmod v1.3 with the same bricked kernel as in seadersn ROM





    Gapps

    Here are 2 versions of gapps which I'm using
    -no Genie widget
    -no Microbes
    -no Thinkfree
    -no Talkback
    -no GoogleEars

    2nd version is w/o Face unlock





    All downloads:






    Changelog:
    Code: 
    [B]V2.2 Mon 31.12.2012[/B]

[B][U]My personal version [/U][/B]
[B]-4.2 Camera with extended settings & normally
working video recording at 1080p & taking
pictures while recording in 6M - 16:9[/B]
-cleaned with normal apps/gapps
-Superuser app
-replaced Mms.apk with standard one (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear 
application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing - NEW VERSION
-ncx v12 kernel & modules - I've found it better than v13
-If you're on old hboot and coming from my 2.0, 2.1 or 2.1.1 version,
you don't have to flash kernel in fastboot,
just flash ROM zip ;)


[B]V2.1.1 Sat 15.12.2012[/B]

[B][U]My personal version [/U][/B]
-cleaned with normal apps/gapps
-Superuser app
-replaced Mms.apk with standard one (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear 
application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing - NEW VERSION
-Google Gallery & Camera from Android 4.2 (video recording is 
stretched + Photo Sphere doesn't work yet) 
I'm using Camera JB+ for video recording. This app I have just 
because of the Gallery, it has Picasa albums. :D
-ncx v12 kernel & modules - I've found it better than v13
-If you're on old hboot and coming from my 2.0 or 2.1 version,
you don't have to flash kernel in fastboot,
just flash ROM zip ;)

[B]V2.1 Sun 02.12.2012[/B]

[B][U]My personal version [/U][/B]
-cleaned with normal apps/gapps
-Superuser app
-replaced Mms.apk with standard one (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear 
application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing - NEW VERSION
-Google Gallery & Camera from Android 4.2 (video recording is 
stretched + Photo Sphere doesn't work yet) 
I'm using Camera JB+ for video recording. This app I have just 
because of the Gallery, it has Picasa albums. :D
-ncx v12 kernel & modules - I've found it better than v13
-If you're coming from my 2.0 version, you don't have to flash 
kernel in fastboot, just flash ROM zip ;)


[B]V2.0 Fri 16.11.2012[/B]

[B][U]My personal version [/U][/B]
-cleaned with normal apps/gapps
-faster as v1.1
-replaced SuperSU with Superuser back (I don't like this ugly icon)
-replaced Mms.apk with standard one (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing
-Google Gallery & Camera from Android 4.2 (video recording is stretched + Photo Sphere doesn't work yet) 
I'm using Camera JB+ for video recording. This app I have just because of the Gallery, it has Picasa albums. :D
-ncx v12 kernel & modules - I've found it better than v13


[B]V1.3 Wed 14.11.2012[/B]

[B][U]My personal version [/U][/B]
-same as 1.2.2

[B]DarkMod versions[/B]
Same changelog as regular SE version except:
-cleaned regular stuff (2nd post)
-standard Dark apps (if you're upgrading from v1.0 you don't need to change non of dark system apps if you already did it before)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear application data and it will be fine ;)
-CMFile Manager
-Gmail 4.2
-Android KB from JB 4.2 with gesture typing
-Google Gallery & Camera w Photo Sphere from Android 4.2 (video recording is stretched + Photo Sphere doesn't work yet) I'm using Camera JB+ for video recording
-ncx v12 kernel & modules [B]or[/B] the same bricked kernel as in regular SE version


[B]V1.2.2 Thu 08.11.2012[/B]

[B][U]My personal version [/U][/B]
-cleaned like DarkMods just with normal apps/gapps
-replaced Mms.apk with standard (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing
-Google Gallery & Camera w Photo Sphere from Android 4.2 (video recording is stretched + Photo Sphere doesn't work yet) 
I'm using Camera JB+ for video recording. This app I have just because of the Gallery, it has Picasa albums. :D
-ncx v12 kernel & modules - I've found it better than v13


[B]V1.2.1 Wed 07.11.2012[/B]

DarkMod versions
Same changelog as regular SE version except:
-cleaned regular stuff (2nd post)
-standard Dark apps (if you're upgrading from v1.0 you don't need to change non of dark system apps if you already did it before)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing
-ncx v12 kernel & modules [B]or[/B] the same bricked kernel as in regular SE version

[B][U]My personal version [/U][/B]
-cleaned like DarkMods just with normal apps/gapps
-replaced Mms.apk with standard (no HTC smileys)
-DeskClock from JB 4.2 (if your Clock FC's after install, just delete/clear application data and it will be fine ;)
-Android KB from JB 4.2 with gesture typing
-Google Gallery & Camera w Photo Sphere from Android 4.2 (video recording is stretched + Photo Sphere doesn't work yet) I'm using Camera JB+ for video recording
-ncx v12 kernel & modules


[B]V1.1 Thu 01.11.2012[/B]

DarkMod versions
Same changelog as regular SE version except:
-cleaned regular stuff (2nd post)
-standard Dark apps (if you're upgrading from v1.0 you don't need to change non of dark system apps if you already did it before)
-Android KB from JB 4.2 with gesture typing
-ncx v10 beta4 kernel & modules [B]or[/B] the same bricked kernel as in regular SE version

My personal version 
-cleaned like DarkMods just with normal apps/gapps
-replaced Mms.apk with standard (no HTC smileys)
-Android KB from JB 4.2 with gesture typing
-Google Gallery & Camera w Photo Sphere from Android 4.2 (video recording is stretched + Photo Sphere doesn't work yet) I'm using Camera JB+ for video recording
-ncx v10 beta4 kernel & modules


v1.0
-Initial release


    About battery life

    ↓↓↓↓↓↓↓↓↓↓↓↓↓
    Battery life - first circle after clean install.

    My version with normal gapps & ncx kernel, all syncs on, gps on, wi-fi on, auto brightness..........

    I have to go to bed, otherwise would last screen on time for 4h :)

    battery-usage.png



    I'm really sorry for my funny English, but I'm not a native English speaker and also I didn't like school very much :D​
    View
    10
    seadersn
    seadersn
    used for screenies etc :D


    DONATORS LIST:

    BIG PHAT THX for donating and financing some drinks :D goes to:

    - maniacaus: merci again!    ​


    Screenies:
    screenshot_2012-10-24xhyfl.png
    screenshot_2012-10-24rusfz.png
    screenshot_2012-10-24rqaf9.png
    screenshot_2012-10-24oza2n.png
    View
    8
    seadersn
    seadersn
    UPDATED POST:

    k, AOSP 4.2.1 build w/o PDroid uploaded, get it here:
    AOSP-endeavoru-SE-v1pt1.zip - 164.59 MB, d-h.st
    AOSP-endeavoru-SE-v1pt1.zip - HTCFanBoys.com
    when you got FC's on downloads or on gmail, try this: force close fix attempt for 4.2.1 AOSP, flashable zip. just flash in recovery and reboot.
    when you don't like the bigger recent app previews, try this: standard preview sizes and fc fix attempt for 4.2.1 AOSP
    just let me know if there is the wish for a OpenPDroid build, too ;)

    edits are as follows:
    • most of my tweaks, which are included in this build, and:
    • ROM is ODEXed
    • added phone additional settings, needed for added
    • t9 dialer
    • added recent app preview "killall" button
    • added vol cursor mod
    • added cm hw keys rebinding options (fixed, assist key deactivated)
    • added camera extensions (submitted to pabx too)
    • added increasing ringtone option
    • added cm filemanager and themes
    • added chronus (weather deskclock)
    • added quick settings mod (use app in drawer to configure quick settings tab)
    • latinime from cm10.1
    • init.d support (submitted to pabx too)
    • included sim toolkit (submitted to pabx too)
    • changed some icons (thx raw ;))
    • made system partition r/w by default

    i don't know if this will be released, don't think so, so this is just something to play around with :) it's bootable on every hboot, incl. working gps.

    you should really do a factory reset before installing this; boot.img flashing required, of course.

    many thanks to pabx for his trees and assistance, cm / aokp / aosp gerrits and gits, and all who are envolved in the aosp 4.2.1 build in general!

    have fun with it :D
    View

New posts