[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview
- Thread starter MapleSyrup
- Start date
No, Chrome says "[file] is not commonly downloaded and could be dangerous". Which is probably what Chrome says about any zip downloaded from Dropbox.
At last check that goo.gl link was clicked 76 times. It's your call weather you use the flash or not but please don't make up 'malware' where none exists.
Attachments
No, Chrome says "[file] is not commonly downloaded and could be dangerous". Which is probably what Chrome says about any zip downloaded from Dropbox.
At last check that goo.gl link was clicked 76 times. It's your call weather you use the flash or not but please don't make up 'malware' where none exists.
I didn't make it up, Chrome did. And no, Chrome doesn't give that alert to every zip download from Dropbox. It is only natural to share that kind of information with the community. Didn't mean to degrade your work.
GSM phone calls
I thought it would be in everyone's interest to know that GSM phone calling has been made possible for this Rom.
http://xdaforums.com/showthread.php?t=1875024
And if possible, can this be integrated into the next update?
I thought it would be in everyone's interest to know that GSM phone calling has been made possible for this Rom.
http://xdaforums.com/showthread.php?t=1875024
And if possible, can this be integrated into the next update?
Last edited:
I thought it would be in everyone's interest to know that GSM phone calling has been made possible for this Rom.
http://xdaforums.com/showthread.php?t=1875024
And if possible, can this be integrated into the next update?
you just flash the files that are at the link you left.....however, it is only for the 7500, not the 7510 just to be clear
WHAT!!!
Can't I make GSM calls on a 7510??? Should a little detail such as non-existing sim card slot matter??? I'm stunned
~~~~~~~~~~~~~~~~~~~~~~~~~~
Tapatalk2 on SGT 10.1 CM10 JellyBean
~~~~~~~~~~~~~~~~~~~~~~~~~~
SOD Error
About my Samsung collection
I have SOD for TAb 10.1 only with original charger, if I take from S1 or S3 no SOD.
SOD i got with original charger about 83-85% of charge.
Maybe somewhere in the code is wrong "mA" number?
If I correct remember is in Siyahs Kernel Configger a point to change the input value from charger.
I hope developer have time to solve.
Thanks for reading my bad english :victory:
About my Samsung collection
I have SOD for TAb 10.1 only with original charger, if I take from S1 or S3 no SOD.
SOD i got with original charger about 83-85% of charge.
Maybe somewhere in the code is wrong "mA" number?
If I correct remember is in Siyahs Kernel Configger a point to change the input value from charger.
I hope developer have time to solve.
Thanks for reading my bad english :victory:
About my Samsung collection
I have SOD for TAb 10.1 only with original charger, if I take from S1 or S3 no SOD.
SOD i got with original charger about 83-85% of charge.
Maybe somewhere in the code is wrong "mA" number?
If I correct remember is in Siyahs Kernel Configger a point to change the input value from charger.
I hope developer have time to solve.
Thanks for reading my bad english :victory:
The tablet draws 5v@2 amps when charging stock. Phone chargers typically are 5v@0.6mp. Pershoot has said the cm9/10 builds he was working on fixed the SOD issues, I know he said his system blew up which is delaying new releases.
Sent from my GT-P7510 using xda app-developers app
I believe he said he managed to fix the issue on CM10 but not CM9, which is why he will be skipping the entire CM9 release and moving to CM10. Mad props to him.
Scrambled screen
It seems like I only get the scrambled boot screen if I do a hard reboot (holding down the power button). There is no scrambled screen if I do soft reboot. I did flashed the modem and bootloader provided by pershoot.
It seems like I only get the scrambled boot screen if I do a hard reboot (holding down the power button). There is no scrambled screen if I do soft reboot. I did flashed the modem and bootloader provided by pershoot.
Unofficial Build of cm10 with new 3.1 kernel.
THIS IS FOR THE 3G GT-P7500 ONLY
Recovery: http://ismaakit.com/galaxy/recovery/p4/ flash via odin. This version is with the "brick" bug fix included from the 3.1 kernel. (I Hope)
ROM: http://ismaakit.com/galaxy/roms/p4/ flash via recovery.
Installation instruction:
Install recovery first via ODIN
backup current ROM.
Wipe/Reset if you are on any other ROM than CM10.
Install ROM
Install gapps.
Enjoy!
disclaimer:
I TAKE NO RESPONSIBILITY IF SOMETHING GOES WRONG
Been running this for a day now, with no issues.
Most is working, except for Wifi hotspot in Secure Mode.
99% of the work goes to pershoot. I just compiled it from his Git and modded it to work in JB with the new kernel also from his GIT.
Note LINKS CAN BE REMOVED AT ANY TIME.
github: https://github.com/isimobile
THIS IS FOR THE 3G GT-P7500 ONLY
Recovery: http://ismaakit.com/galaxy/recovery/p4/ flash via odin. This version is with the "brick" bug fix included from the 3.1 kernel. (I Hope)
ROM: http://ismaakit.com/galaxy/roms/p4/ flash via recovery.
Installation instruction:
Install recovery first via ODIN
backup current ROM.
Wipe/Reset if you are on any other ROM than CM10.
Install ROM
Install gapps.
Enjoy!
disclaimer:
I TAKE NO RESPONSIBILITY IF SOMETHING GOES WRONG
Been running this for a day now, with no issues.
Most is working, except for Wifi hotspot in Secure Mode.
99% of the work goes to pershoot. I just compiled it from his Git and modded it to work in JB with the new kernel also from his GIT.
Note LINKS CAN BE REMOVED AT ANY TIME.
github: https://github.com/isimobile
Last edited:
I haven't seen any other AOSP threads mention working FFC, so I'd guess its not ready yet.
Sent from my ADR6425LVW using xda app-developers app
2 posts up from yours it was stated that it is working. That is part of the 3.1 kernel finally being implemented that pershoot has been working so hard on.
Sent from my Samsung Galaxy Tab 10.1 using XDA Premium HD app on Jellybean.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
199DOWNLOADS
I'm not going to build CM10 anymore, pershoot already published his experimental builds, you can find them (for all Galaxy Tab 10.1 models) here: Droid Basement
Google Apps
gapps-jb-20120729.zip
Mirror 01: gapps-jb-20120729.zip
Mirror 02: gapps-jb-20120729.zip (thanks to kingofcomedy)
Mirror 03: gapps-jb-20120729.zip
gapps-jb-20120717-signed.zip
gapps-jb-20120716-signed.zip
FLASH SUPPORT
Check this guide: [GUIDE] [HOW-TO] Install Adobe Flash Player on Android 4.1 Jelly Bean
Be aware, it may cause troubles with web surfing, consider this before reporting problems.
VIDEOS
CM10 Preview JB 4.1.1 Galaxy Tab 10.1 (thanks to illmatic24)
PC CONNECTION
23I have made a camera patch for this rom. It will only get the rear camera working. This is the first android zip I've made, but it works for me. You can get it here:
http://ganiman.com/gtab_jb_camera_update.zip
Flash with CWM or TWRP. If you try to switch to the front camera, it will cause gallery to crash and the camera app will not open anymore. Clearing data on the gallery app fixes this.22NEW BUILDS
Wi-Fi Only (GT-P7510) -> cm-10-20120726-UNOFFICIAL-p4wifi-sig.zip
md5: 09fcdc58c83c30e8ff00e756010c0ca1
sha1: 576e14db1493118776dbdcf1ab839f916ce042f2
Wi-Fi+3G (GT-P7500) -> cm-10-20120726-UNOFFICIAL-p4-sig.zip
md5: 32fff488ffb32126bc5255e2e866da5b
sha1: fe42a4b7cdb43536268fe06009b1add083ebcc42
Google Apps: gapps-jb-20120726-signed.zip [source]
This are the last builds of CM10 from me. pershoot is (very soon) going to upload testing builds, and this builds are virtually the same thing, I think there's no need for redundancy. Besides, for several reasons, is better to get them from the source (in this case, pershoot).22i know its off topic but any chance u have started working on 4.2 already? saw tat 4.2 is being pushed to AOSP. in ur opinion does our tab support 4.2?
this tab will support 4.2.
when it is integrated within CM, then it will be in all builds from that point.22
there will be no public RC from me, per se. CM10 is not even at RC stage (to my knowledge; but not aware of all devices under the umbrella). when ive squashed the majority of the stuff, ill put builds out for public use (on DB) for playing with (probably this week). Then upload source changes in to CM and get nightlies going for this tab for all variants (probably after the android bbq).
