Help| My GT I9003 not booting

AhmedMourad said:

Hi..
I've a problem. I've GT-I9003 which is not booting, so i want to Root it.
When I was finishing, it is not booting too.

this message from Odin.

Code:

<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> Sbl.bin
<ID:0/019> param.lfs
<ID:0/019> cache.rfs
<ID:0/019> modem.bin
<ID:0/019> normalboot.img
<ID:0/019> system.rfs
<ID:0/019> RQT_CLOSE !!
<ID:0/019> RES OK !!
<ID:0/019> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/019> Removed!!

and this message form WIPE

Code:

E:failed to mount /data (No such file or directory)
--Copying media files...
E:failed to mount /sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your strotage not prepared yet. please use UI menu for format and reboot action
Media file copy faild.
# NORMAL MODE #
-- Appling Multi-CSC..
Instaling Multi-CSC
multicsc : scan access to ojpcom.
multicsc : scan access to ojpom.
multicsc : opera mini[lib] reset.
Appling the CSC-code 'MID'.
successfully applied multi-CSC.

plzzzz i want to fix it

Click to expand...

Click to collapse

AhmedMourad said:

First, Thanks.. and this steps will are token to fix it.
[ If there are Error tell me plz]
Then, I'll take this steps to Flash XXKPE 5 Files [PIT, PDA, PHONE, BOOTLOADER and CSC ]

1. Firstly, Download the link from Krazzy's stock firmware thread.
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Factory reset
17. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.

Source link

But.. put DDMF1 in PAD In Download Mode,Let The Phone Boot.
Finally, The CF-Root For DDMF1 in PAD in Download Mode And Go To Recovery Or Phone Settings And Do An Factory Reset.

Click to expand...

Click to collapse

gulidelias said:

hi everyone.
some one has this rom ?? because it was loaded on hotfile and it close so if some one can upload in other server please

Click to expand...

Click to collapse

magpipishbol said:

same problem. anyone help us please

Click to expand...

Click to collapse