Well flash pa back I'm sure its not the ROM its your phone please report issues ROM related thanks
My ParanoidKang Android Tmo S3
My ParanoidKang Android Tmo S3
Tweaked CM10.1+PA3.0+AOPKmr1=ParanoidKangDroid V2.03 JB 4.2.2 ROM(03.01.13)
- Thread starter Romcrazguy
- Start date
- Status
ROM is pretty awesome! tons of customization options. i was a little upset because my theme of choice wasn't working but i found a new one and all is well. thanks a lot!
would you like a mirror of the download so your db doesn't get shutdown? i'd be happy to provide one at scourceforge ^_^ .
i'm glad its finally over here on the tmobile side
i'm glad its finally over here on the tmobile side
Last edited:
Sure that would be great pm me and I'll post it in the OP
My ParanoidKang Android Tmo S3
Pm sent ^_^
Yes...I did all that...tried with twrp and can...and flashed twice...Gmail closes...account manager...all kinds of stuff...I REALLY WANT THIS ROM...
Sent from my SGH-T999 using xda premium
Sent from my SGH-T999 using xda premium
I don't recommend twrp recovery I use cmw and have no problems whatsoever I think twrp is the problem not the ROM
My ParanoidKang Android Tmo S3
My ParanoidKang Android Tmo S3
But I also used cwm and still had problems...believe me I wish I didn't
Sent from my SGH-T999 using xda premium
Sent from my SGH-T999 using xda premium
For people who are having problems try this method go to CWM do full wipe including format SD, then flash ROM and Gapps. Then wiped cache and dalvik again before reboot and it should work fine if it hangs on reboot when you change modes.. all you needed to do is hold power and shut it down.. then turn on and you will be fine
My ParanoidKang Android Tmo S3
My ParanoidKang Android Tmo S3
I had the same issue with twrp, first the home button didn't work then the animation graphics looping. This is what I did to make it work :
What you have to do is flash rom, flash gapps, wipe all cache, reboot your phone, let the android setting run, then it'll go back to the looping. let it loop for 2 mins, restart your phone into recover, wipe chache, Dalvik, then factory reset. Then restart into system and the rom should boot up fine. You might have to redo the wipe cache, dalvik and factory reset a second time if it doesn't work right away after the instructions.
Last edited:
Good to know that ktoonz works w/rom which version are you using? Im using lean kernel but it would be good to know if faux would work as I'm trying to compile a list if kernels for people who will flash this room so that they don't end up in a bootloop
My ParanoidKang Android Tmo S3
My ParanoidKang Android Tmo S3
Which theme is that? If you have it on tablet mode try changing it to phone or phablet then try it one more time
My ParanoidKang Android Tmo S3
i was using SSDwhite. it ran fine but the H+ symbol in the status bar would remain blue as opposed to being white. not a big deal but it was a bit of an eyesore so i switched to Crystal 2 and kept the whole thing blue.
running this ROM with ktoonz and it's so smooth it's unbelieveable. thanks for this ROM, it's simply amazing!
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
34Tweaked CM10.1+PA3.0+AOPKmr1=ParanoidKangDroid V2.03 JB 4.2.2 ROM(03.01.13)
This really isn't ParanoidAndroid, AOKP, or CyanogenMod anymore. When you put them all together you have something totally new. With this ROM you can do interesting things like having new rows of toggles and many other things that you'll have to find on your own. However keep in mind that on some occasions different settings can cause conflicts with others considering they're not supposed to be together in the first place, so just be smart about what you do.
the customization is endless to create the L00K you like!
3/01
Serious tweaking for battery stability and performance
signal and data tweaks
build.prop Modifications
custom kernel is included, it contains the following:
Linux 3.0.66
Compiled with GCC 4.7
O3 optimization flags
Overclocking to 1.836 Ghz
Underclocking to 96 Mhz
Voltage Control
Fast Charge
Plenty of performance tweaks for optimal speed and battery life
added PIMP MY ROM app for some more tweaking that will make you phone MORE STABLE!
info below about app
Pimp my Rom is an app for rooted users that will allow you to choose between a plethora of tweaks, mods, hacks, apps and features to your current ROM.
This app has been proven to improve the performance of your device on many points.
Pimp my Rom can be used on ANY Android Device, running ANY Rom
Some of the features include :
>> Build.prop Tweaks <<
- Better jpg image quality
- Better camera recording quality
- Lock launcher in memory
- Battery savings
- Disable kernel error checking
- Dalvik VM tweaks
- Faster scrolling
- Better touch responsiveness
- Faster browsing and download speed
- Allow purgeable assets
- Reduce dialing time
- Misc 3G tweaks
- Deeper sleep
- Reduce black-screen time of the proximity sensor after a call
- Smoother video streaming
- Faster wifi connect/disconnect
- Overall smoothness improvements
- Increase the size of VM heap
>> Enable/Disable Android Features <<
- Enable hardware video acceleration
- Disable Android logger
- Enable Android logger
- Enable gpu UI rendering
- Enable HSUPA
- Enable JIT (Just In Time) Compiler for Dalvik vm
- Disable Normalized Sleeper
- Disable Gentle Fair Sleepers
- Disable New Fair Sleepers
- Enable surface dithering
- Disable Boot-Animation (doesn't work on ics and +)
- Disable usage-data sending
- Disable volume buttons wake
- Disable adb notification icon
- Buttons backlight always enabled when screen on
- 16bit Transparency
>> Multitasking <<
- Choose between 4 levels of OOM (Out Of Memory) Groupings : Low/Mid/High/Very High
- Choose between 4 levels of Minfree Low Memory Killer settings : Low/Mid/High/Very High
- Choose between 2 levels of ZRAM Compression : 64mb/128mb
- Tweak your kernel to be adapted and stable on high multitasking conditions
- Tweak your Dalvik Virtual Machine to be adapted and stable on high multitasking conditions
>> Add Features & Mods <<
- Add support for OpenVPN connections
- Install Beats Audio binaries & dsp manager for a greater sound experience
- Install Adrenaline Boost Script
- Install Sony Walkman suite : Music Player & Visualizer, Clearbass soundfx and Image Gallery & Editor
- Install Bravia Engine
- Install xLoud
- Install Touchwiz Launcher
>> GPS Configuration <<
- Choose between 79 countries + 5 continents of gps.conf files
(Having the right gps.conf file for your country is esssential for the accuracy and lock-speed of your GPS)
>> Internet Security & Stability <<
Security :
- Protect yourself against SYN attacks and the DoS (Denial of Service) they cause by reinforcing your tcp/ip stacks
- Block redirects
- Block source-routing : source-routing allows one to fully trace the packets he sends, thus it can be used by blackhats to hack into your device
Stability and Speed :
-Increase queue and buffer size of all tcp sockets to make it more stable in high broadband consumption conditions
- Avoid TIME-WAIT state by re-using the Sockets in time-wait state. Reduces network memory-loading
- Various IPv4 speed improvements
- DNS tweaks for faster name resolution, thus faster connection to websites
- ppp0 interface speed tweaks
2/22
Changed "System"to"Interface"Removed duplicate Notification Drawer settingsNow compiled with GCC 4.7 toolchainAdded 96 Mhz clock speedAdded voltage controlAdded fast charge
To enable fast charge or to undervolt, just go into Performance Control
2/21
Updated to Android 4.2.2
Updated to CM 10.1
Updated to ParanoidAndroid 3.00
Updated to AOKP mr1.1 build 1
Added Update Center under Settings
Updated bootanimation
I added my own custom kernel that contains the following:
Overclocking to 1.836 Ghz
Underclocking to 192 Mhz
Plenty of performance tweaks
Linux 3.0.65
11 /27 Changelog
Merged CM10 Stable
Merged AOKP Milestone 1
Merged ParanoidAndroid 2.55
Kernel is default clocked at 1.512 Ghz (overclockable to 1.836 Ghz)
Added Animation Manager
Reorganized some stuff in Settings
Updated 4.2 Keyboard
Updated MMS app
Added more AOKP toggles
Fix volume rocker when screen off
New AOKP circle mod battery
Add alpha settings to circles lockscreen
Added Circles unlock screen (Under CM+ Settings)
Updated SuperSU
Updated CM File Manager
Fixed bootloop when changing UI
Added Sound tab under Advanced Device Settings
please check out screenies http://xdaforums.com/showthread.php?t=1944523
Donations to Romcrazguy
Big thanks to thebz1
Instructions:
CWM: Install Rom: Download Mirrorhttps://www.dropbox.com/s/fa7n22vl1g7fuqd/PK-2.03-TWEAKEDd2tmo.zip Thanks to Lokichim!!
MD5: 68e6c3561a6d2b4c78ad4ced36c84a91
PLEASE DO FULL WIPE & Make sure the file you download is
CWM: Install Zip: please flash 12/12 this was confirmed to work[/B]:http://goo.im/gapps/
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings
If you want to explore the various phone modes, tap "Configuration," chose an option, wait for it to finish, then do a manual reboot
ParanoidAndroid's webpage: http://www.paranoid-rom.com/
AOKP's webpage: aokp.co/
Themes and other goodies you can find here: http://xdaforums.com/show....php?t=1646034
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
If you have an issue and you want to call my attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread, Cyanogenmod's, ParanoidAndroid's, and AOKP's as well for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Pebble Blue Samsung Galaxy S III running THE BEST JellyBean ParanoidKANGdroid!8I have an update to come your way as soon as I get a another laptop due to my 2 year old son spilled juice all over this one unfortunately I was going to have it cooked up for you guys tonight but now I can't since my laptop is unusable however the good news is i have been testing it all day and i have to say the update fixed bugs and many new additions were added that will blow your mind away!!!the ROM is now stable as a Rock!!!! see change log below
Merged CM10 Stable
Merged AOKP Milestone 1
Merged ParanoidAndroid 2.55
Kernel is default clocked at 1.512 Ghz (overclockable to 1.836 Ghz)
Added Animation Manager
Reorganized some stuff in Settings
Updated 4.2 Keyboard
Updated MMS app
Added more AOKP toggles
Fix volume rocker when screen off
New AOKP circle mod battery
Add alpha settings to circles lockscreen
Added Circles unlock screen (Under CM+ Settings)
Updated SuperSU
Updated CM File Manager
Fixed bootloop when changing UI
Added Sound tab under Advanced Device Settings
Sent from my newest 1.40 Pk using xda premium :thumbup:8OP Updated to Pk 1.40!
Hey guys,
as promised here is the updated PK!! Full wipe is needed so not dirty flashing or you will have issues/bugs.flashhh away!44TONS more options like animation manager, Build prop Mods, under setting >advanced you will notice outdoor mode ( not sure if pac has this though)& if you go into advance there is a new tab sound which will allow you to boosts volume of earpiece when making calls
New posts
-
-
How to use galaxy A8 without battery?- Latest: penisaids69
