Upgrade Siemens SX56/AT&T US to 2003

---

Can someone hook a brother up.

Does anyone know where I can get info as well as the software on upgrading my Siemens SX56 on AT&T USA to PocketPC 2003. I have already done the radio upgrade from Siemens site and would like to get some of the capabilities of PPC2003.

Thanx

Yea you can get it here:

http://cuba.calyx.nl/~jsummers/XDA/
http://www.xs4all.nl/~jsummers/XDA/

Then use my Qman's how to use XDArit to write ppc2003pe.nb1 to your SD card!

1. Place XDArit and the ppc2003pe.nb1 file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
4. Note that the Windows CE box is already checked so just click the browse button at the end of that window.
5. Select the ppc2003pe.nb1 image and then Open

Notice that ppc2003pe.nbo was automatically added as your boot-loader and its check box is unchecked so leave it
that way and click OK. XDArit should start writing to the card.

When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset.
It will ask you if you want to download the image, select yes and it will start restoring from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Reset".

BTW the above is based on using XDArit version 1.0 which can be download from the software section at:
http://www.yorch.net and a PCI USB 3-One Travel Flash reader P/N FPT-D bought at Fry's.

Oh yea before you do the upgrade note all of your GPRS connection settings because you'll have to manually put them back.

So, I am not able to transfer the file to the SD card with it in the Siemens device and in the Sync cradle?

Just want to make sure about that.

Thanks,
Savi

Never mind. I already figured out that I can not see the SD Card as a drive.