Originally Posted by miloslavc
Hello,i recently got Note 8.0 N5100 with official 4.2.2 and i decided to root it. I used CF-Auto-Root and followed instructions, downloaded newest drivers and everything went well in odin 3.07 but after odin finished i got stuck wirh samsung galaxy note logo and nothing happens now.
what shall i do now, can anybody please help me!!!!!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Problem solved. I exidently when i was using search in cf auto root website downloaded wrong cf file for p5100 instead of n5100.
Your not the only one who had this problem... I which the mod would shut down the thread pushing rooting via flashing.
Too many newbies are having issues flashing.
I recommend saveroot.zip. It leaves your device's counter untouched. Also it is 100% safe.
Now what to do with your device since it is stuck at the Samsung logo.
You can do what I do for stuck screens. Power on, and hold only the up volume key. Keep it held until boot screen is finished.
If that does not work, go into recovery and clear cache and reboot.
If none of the options work, you may have flashed with an incompatible file, there are three versions and only one is specific to your device. you can try re-flashing with a good file.