Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,732,020 Members 40,970 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Bootloop after RUU attempt (completely stuck!)

Tip us?
 
victor_021
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Apr 2014
Default [Q] Bootloop after RUU attempt (completely stuck!)

I recently tried to revert back from CM 10 to stock on my HTC one.

Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.

But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldnít get into the OS anymore, it just went straight to the bootloader. I didnít bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldnít get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldnít just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.

I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.

As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.

The getvar all info:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s

If any more info is needed just ask
 
GalaxyUser50
Old
(Last edited by GalaxyUser50; 20th April 2014 at 06:33 PM.) Reason: Adding
#2  
GalaxyUser50's Avatar
Member
Thanks Meter 13
Posts: 95
Join Date: Aug 2013
Quote:
Originally Posted by victor_021 View Post
I recently tried to revert back from CM 10 to stock on my HTC one.

Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.

But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldn’t get into the OS anymore, it just went straight to the bootloader. I didn’t bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldn’t get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldn’t just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.

I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.

As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.

The getvar all info:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s

If any more info is needed just ask
Where did you get the RUU from? It should work even if S-ON as long as the version of the RUU is the same as or newer than your current version.

EDIT: Did it say it was Encrypted or Decrypted? It needs to have an Encrypted Signature or else you'll get the Remote 12 error.
The Following User Says Thank You to GalaxyUser50 For This Useful Post: [ Click to Expand ]
 
clsA
Old
#3  
clsA's Avatar
Senior Member
Thanks Meter 838
Posts: 3,116
Join Date: Aug 2010

 
DONATE TO ME
Quote:
Originally Posted by victor_021 View Post
I recently tried to revert back from CM 10 to stock on my HTC one.

Everything seemed to be going fine, I found what I believed to be the right RUU(I couldnt find it in a .exe, only .zip) .
And I successfully used revone to get s-off, remove tampered and change unlocked to locked in the bootloader.

But when changing s-off back to s-on the security warning banner showed up in the bootloader and for some reason I couldnít get into the OS anymore, it just went straight to the bootloader. I didnít bother thinking about it since I was going to install the RUU either way. But I get the same error every time I try to install it: FAILED (remote: 12 signature verify fail). Also I couldnít get into recovery, it just shot be back straight into the bootloader.(Correct me if i'm wrong but did the ruu.zip fail because you have to have s-off for it to work? Would make sense.) On top of that I couldnít just get s-off again because for some reason i can only use adb commands when the phone is in the actual OS, it doesn't seem recognize it when its in bootloader/fastboot/recovery, fastboot commands work fine tho.

I was able to unlock the bootloader again using htcdev and I can now access twrp, but I can't seem to be able to factory reset, it just says: Unable to mount /data and unable to mount internal storage. The mount option in twrp does not seem to work either, trying to check data makes nothing happen. Also instead of it just launching to the bootloader directly on startup, it now gets stuck in a bootloop until you make it go into the bootloader.

As you can see i'm in quite the pickle and absolutely any help on either getting back to a functional CM or stock would be much appreciated.

The getvar all info:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W903347
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.045s

If any more info is needed just ask
Never Go S-ON !!!!
flash this with TWRP
http://www.htc1guru.com/dld/guru_res...-62-401-1-zip/
HTC One 32 GB AT&T

The Following User Says Thank You to clsA For This Useful Post: [ Click to Expand ]
 
victor_021
Old
#4  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Apr 2014
Thanks for the replies but after a few hours of nonstop research i managed to fix the problem. I simply installed CWM because TWRP had totally crapped out on me. From there I just simply sideloaded a Viperone 4.4.2 rom and everything is working fine, don't really feel the need to return to stock anymore. Can't believe how simple that turned out to be, anyway thanks for the replies and hopefully this might help other people in the same situation.
 
jaspreet4140
Old
#5  
Member
Thanks Meter 0
Posts: 43
Join Date: Apr 2014
Default stuck

hlo sir,I m really depressed these days bcz I can't finf ruu for my htc one as it shows
TAMPERED RELOCKED SECURITY WARNING.. my cid is VODAP021 and mied is PN071400 hboot
is 1.54 and os is 2.24.980.3... I tried to flash a guru reset with same cid no. but with slight
difference in os it was 2.24.980.2 and it showed signature verify fail......so plzzzz helpppp
meee....suggest me the perfect ruu
 
alray
Old
#6  
alray's Avatar
Senior Member
Thanks Meter 915
Posts: 2,375
Join Date: May 2012
Location: Montreal
Quote:
Originally Posted by jaspreet4140 View Post
hlo sir,I m really depressed these days bcz I can't finf ruu for my htc one as it shows
TAMPERED RELOCKED SECURITY WARNING.. my cid is VODAP021 and mied is PN071400 hboot
is 1.54 and os is 2.24.980.3... I tried to flash a guru reset with same cid no. but with slight
difference in os it was 2.24.980.2 and it showed signature verify fail......so plzzzz helpppp
meee....suggest me the perfect ruu
Guru reset is a rom not a ruu, so you must be bootloader unlocked to flash it via custom recovery (twrp 2.6.3.3 preferred)
If I've helped you, please hit the ''tanks'' button
If you want a reply, quote or mention me using @alray

Useful links for the HTC One:
nkk71's SuperGUIDE to returning 100% back to stock
Flashing requirements chart by nkk71
HTC1Guru.com by crushalot
 
jaspreet4140
Old
#7  
Member
Thanks Meter 0
Posts: 43
Join Date: Apr 2014
Default stuck

@aray ,sir thnx for the quik reply....sir but I m stuck can't unlock bootloader I m s-on plz tell with which ruu I would flash my phone..send link....I would really appreciate that
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


TRENDING IN THEMER...