FORUMS

CloudPlayer: DIY HiFi Music Streaming Solution

In our Helpful Guide to Music Streaming Services, we mentioned several different services … more

Optimize Battery Life with This Useful App

Battery life is an important aspect of your smartphone, especially if you use it for more … more

The OnePlus 2 & The Year of Smartphone Compromises

We are very close to entering the last third of 2015, and we have now seen many of … more

OnePlus 2 Teardown, Major Android Vulnerability – XDA TV

The OnePlus 2 has been officially released. That and much more news is … more
Post Reply Subscribe to Thread Email Thread
I bought a MP 809t Smartphone. Are there any CWM and ROM for this phone? It runs android 4.3.0 from fabric, maybe AOSP, In "about phone" update is not listed.






18th September 2014, 09:22 AM |#2  
Junior Member
Thanks Meter: 1
 
More
Android 4.4.2
I have stock Android 4.4.2 KitKat
1st October 2014, 08:48 AM |#3  
Member
Thanks Meter: 1
 
More
4.4.2 ROM
Can you please upload the ROM, so that we shall benefit. I have a problem. I bought MP809T in Abu Dhabi, UAE. There it used to recognize the SIM and was working. But now I am in India and no SIM working. I am not sure whether the current ROM 4.3 does not support this region or so. Please help.

Also if someone can guide on how to install this stock ROM 4.4.2, it would be of gr8 help.

Thanks,
Joe

Quote:
Originally Posted by reshi5531

I have stock Android 4.4.2 KitKat

1st October 2014, 02:31 PM |#4  
Junior Member
Thanks Meter: 1
 
More
Installing ROM MP809T
Quote:
Originally Posted by spljoe

Can you please upload the ROM, so that we shall benefit. I have a problem. I bought MP809T in Abu Dhabi, UAE. There it used to recognize the SIM and was working. But now I am in India and no SIM working. I am not sure whether the current ROM 4.3 does not support this region or so. Please help.

Also if someone can guide on how to install this stock ROM 4.4.2, it would be of gr8 help.

Thanks,
Joe

Hello spljoe,

I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.

If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - dani4017@gmail.com
The Following User Says Thank You to reshi5531 For This Useful Post: [ View ]
2nd October 2014, 04:34 AM |#5  
Member
Thanks Meter: 1
 
More
Question LCD Version Checking?
Hi Dani,

Thanks for prompt response. It seems u r having Quad-Core phone (MTK6582), but mine is 6592 chipset, octacore one. Anyways, thanks a lot for sharing. I got the links for 6592 from needrom; BUT having the doubt about LCD version...how to check the LCD version before flashing any ROM?

If you can clarify, it will be gr8.

Thanks,
Joe

Quote:
Originally Posted by reshi5531

Hello spljoe,

I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.

If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - dani4017@gmail.com

3rd October 2014, 07:14 AM |#6  
Member
Thanks Meter: 1
 
More
Question For Mtk 6592 - OctaCore
Dear Dani,

Thanks for uploading all these files. It looks like u r using Quad Core 6582 chipset phone 809T. But I am having MTK6592 Octa-Core Phone. If you can, please assist me installing this 4.4.2 firmware. My phone is not detecting India network providers. I set the phone region to UAE and it was working when I was in Abu Dhabi, UAE. But now I am in India and I want to reinstall the ROM and check. My phone is just a electronic gadget now, without phone funtionality. Please help.

I am following this link below and I am getting an error message unable to continue with flashing. Anybody please help.
Click image for larger version

Name:	PMT Changed Error during Flashing.png
Views:	204
Size:	103.5 KB
ID:	2958354

Click image for larger version

Name:	without recovery checked.png
Views:	194
Size:	111.5 KB
ID:	2958355
http://www.needrom.com/download/offi...-809t-mtk6592/

Thanks,
Joe

Quote:
Originally Posted by reshi5531

Hello spljoe,

I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.

If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - dani4017@gmail.com

3rd October 2014, 04:57 PM |#7  
Junior Member
Thanks Meter: 1
 
More
Solution
Just download software from link that I give you from mediafire.com. There is a different flash software that can choose lcd version I can flash. Guide is also included.
2nd November 2014, 04:59 PM |#8  
Junior Member
Flag Rio Verde
Thanks Meter: 0
 
More
Quote:
Originally Posted by reshi5531

Hello spljoe,

I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.

If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - dani4017@gmail.com

Friend, I need your help. My 809T, with MTK6592, broke the screen. But I found one screen to buy, and I did this purchase, I already have the new screen. But when I plug the flat cable of the new screen in cell phone, the screen light up, but no image was shown. After that, I knew that 809T have two screen versions, and probally the screen that I bought have a different version that screen that came with cell phone.

I downloaded the ROM, but I need a help with intructions to install the ROM with driver for my new screen, because till now I couldn't install the screen with any program. I have the "SPMultiPortFlashDownloadProject", and "SP flash tool", but a several errors appear with these programs. Could you give the steps to configure these programs? My new screen is TD0-HD0499K70425.



I really need this cell phone, and think that I could lost it because I can't install the screen drives me crazy, because the cell phone is too good!
7th November 2014, 08:44 PM |#9  
gerstavros's Avatar
Senior Member
Flag Athens
Thanks Meter: 98
 
More
I have octa core model, with 4.4.2. i cant root it at all, any ideas?
3rd July 2015, 06:02 PM |#10  
Junior Member
Flag buzau
Thanks Meter: 1
 
More
Question other problem with octa core
hello i got a phone, it says italian phone, but it is a clone from mpai 809t with mtk 6592 / 13 mp front and back camera, with 2g ram 16 rom
i got the problem with display driver it is not working with TDO_HD0499K70425 or TDO_HD0499K70137
it is different display 1280x720
i found the right driver fo display on an elephone p9 , but the elephone firmware is not good
is it possible to extract somehow the driver from elephone and pu it on 809t rom
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes