[APP] FuzeHFix

---

Okay, here's an app that will try to unstick the Fuze's HSDPA settings. It sets:

HKLM\OEM\RIL:

• DisH = 0
• EnableHSDPAIcon = 1

and resets them again as a start-up app after every soft-reset. It will then stay around for 2 minutes making sure those registry changes stick and then quit.

This may/may not fix the FUZE's speed issues especially if the DisH isn't read after the OS is up and running. Credit goes to the HSDPA thread that brought this up.

Takes 1K of memory, and 12K of storage.

2008/11/15: new version 1.1 just deletes DisH and enables the icon. May work out better. Choose your path.

This is awesome. I hope it works.

Have you attempted to counteract the PROVXML which loads up on start? Can this even be done without hard resetting or flashing a new ROM?

Originally Posted by iboj007

Have you attempted to counteract the PROVXML which loads up on start? Can this even be done without hard resetting or flashing a new ROM?

Probably can't fight that without doing the hard-reset/reflash.

The ShowSIM contacts in the OEM Kaiser roms stuck also and needed a new rom to permanently fix.

These settings can be found in

HKLM/Software/OEM/RIL

DisH is set to 1 from ATT --- No tweak app will mod this - change it to 0, and we should all be good to go.

Originally Posted by acardinale

DisH is set to 1 from ATT --- No tweak app will mod this - change it to 0, and we should all be good to go.

The point is it gets reset to 1 after every soft-reset.

This app mods it to 0 and refixes that during every soft-reset. Anyways, the better fix may be to just delete the key.

New version 1.1 does that. Choose your pill.

my setting never reset after softreset ... my adjustment was still there.

:/