[23 Feb][DAF-CWR] PPC_SHIFTPDA Desire Glass Data2SD V1 & Ginger V2[Kernel PRJ.V3]

Search This thread

DroidTh3ory

Senior Member
Dec 12, 2010
4,214
2,093
Troy, Michigan
www.droid-hive.com
cooltext492352474.png




PPC_SHIFTPDA GINGERBREAD V3 [Kernel Tytung r1_oldcam] (09.01.11)
46195316.png

Working
3G / Data, Audio, Bluetooth, GPS is working and don't need to disable GPS setting now. (No 60mA battery drain issue.) (Credit to Gauner1986)
Network Location, Wi-Fi, Phone, Camera (5MP), Camcorder (720x480)
WiFi Tethering/Hotspot
USB Tethering

Installation [*IMG]
- You should have at least MAGLDR 1.11 on device.
- For installation you need to enter MAGLDR (hold "Power" button during boot)
and select "Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.

Installation [*ZIP] Recovery
1. You should have at least MAGLDR 1.11 on device.
2. Extract downloaded zip to a folder of your choice
3. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
4. boot into magldr and select USB Flasher option while phone is connected to PC
5. Run DAF.exe included in the zip and follow onscreen instructions.
6. coppy "update" to storage card
7. After complete, again boot into magldr and select "Boot AD SD" option



ANDROI-PPC-SHIFTPDA-GingerBread- V3 NAND (09.01.11)[*IMG]

ANDROI-PPC-SHIFTPDA-GingerBread- V3 Recovery (09.01.11)[*ZIP]

Hey, I just tossed this in my test phone.... It will now go into my Personal phone. Hell of a job on this!!! What a attention to detail.

Keep this up. Your new fan. :)
 

haxlidinh

Member
Sep 9, 2010
48
7
if i've got clockwork recovery already, shall I just start from step 6?
and do I need to swipe my phone to update this rom then? I have a Muiu rom .zip being on my phone at the moment. Thanks
 

yashper

Senior Member
Mar 10, 2009
88
9
Samara City
On a device the insertion isn't has reached 100 %...

On the personal computer an error


Code:
Error happen
Read below for more information

Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)

Error Description: SI flash must have all sectors full.
Info: .\RSPL\RSPL.cpp (645)



However, all works))
 
Last edited:

FuL_75

Senior Member
Apr 23, 2007
83
5
On a device the insertion isn't has reached 100 %...

On the personal computer an error


Code:
Error happen
Read below for more information

Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)

Error Description: SI flash must have all sectors full.
Info: .\RSPL\RSPL.cpp (645)



However, all works))

Same here, very fast ROM, I'm very impressed.

blinking key pad lights here too.
 

Top Liked Posts