|
The new firmware is up.
Firmware Update
The January 14, 2011 Firmware Update includes the following changes:
Resolution of Micro SD capacity display
MAC address format has been changed
Resolution of system hangup after factory reset
Resolution of connection failure w/ AP if Wi-Fi is turned off before going to suspend mode
The Firmware Update for your A7 Internet Tablet must be downloaded to your PC or Mac and copied to a MicroSD card for installation.
IMPORTANT: A MicroSD card is required to update the firmware. The USB port is a host only and cannot be used for firmware updates.
Note: Since the files stored in the Tablet may be deleted or overwritten during the update process (including the pre-installed movie trailers), please copy any files which you have stored in the Tablet before updating.
Please follow these directions carefully for a successful update:
A7 Firmware Update Instructions
Download the Firmware Update ZIP file at the bottom of this page to your PC or Mac.
Copy the ZIP file from your PC or Mac to a MicroSD card. The file must be copied to the ROOT DIRECTORY of the MicroSD card. Make sure you do not copy the file into a subfolder.
Insert the MicroSD into the slot at the top of the A7 Tablet.
Plug the A7 Tablet into an electrical outlet using the AC adaptor.
Open Settings > About device > System updates > Update device.
Follow the on-screen prompts. The system will restart automatically in update mode, then will restart when the update is complete.
To confirm that your update has been correctly installed, open Settings > About device. Scroll down to Build version and you should see PBJ8000.2.0124.
Firmware Update - Version 2.0124 (90.8 MB) - Dec. 24, 2010(this is a typo)
|