For All Those Who Stuck In The Boot Screen - Try Mamaich Method !!!

[netaddict]

Originally Posted by Leies 7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .

Can you guys please tell me which ROM did you reflash which "actually" worked? (A download link will be really appreciated.)

Thanks in advance!!!

EDIT: I have O2 xda exec handset.

[Leies]

if you like to try WM6 , you may try
Helmi_c (V1.1) version :
http://forum.xda-developers.com/showthread.php?t=291875

or not you may try aku 3.5 from Ivan
http://forum.xda-developers.com/showthread.php?t=287270

[romolos]

does "task 28 55aa" command work on Wizard too?

[Arcco]

You are the greatest. Thank You Very Much!!!!!
MY phone works! Great!

[CooterBrown]

Are there any downsides of doing this "task 28 55aa" command on device such as the Apache? I was stuck in bootloader mode and did this first instead fo the set 14 0. I was able to get out with set 14 0, but when I tried to update my radio ROM with the latest Carrier upgrade, I get the Error 100. So, I am trying to figure our if there was a correlation between the task 28 55aa & my issues, and if so, how I can roll back the change.

Thanks

[aristweed]

I get: Invalid command: task 28 55aa.

I'm trying this on my SMT5600. Am I doing something wrong??

Also, is the m5000ruu.exe good for my phone?? I can't find a working ROM anywhere!!

HELP

Originally Posted by Leies get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset) 1. Stop Activesync USB connection 2. Uni : Reboot Bootloader then Connect USB 3. PC : Run mtty1.42.exe 4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card) 5. type : task 28 55aa 6. Press Enter 7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like . For task 28 55aa in mtty success , will show the message (attachment ) DONE .

[jcute]

Originally Posted by aristweed I get: Invalid command: task 28 55aa. I'm trying this on my SMT5600. Am I doing something wrong?? Also, is the m5000ruu.exe good for my phone?? I can't find a working ROM anywhere!! HELP

USB>task 28 55aa
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 462

Storage Total block: 474

Total Bad Block in CE: 0

NeedToEraseBlockStart: 475

Storage format success

Is it finish?

[aristweed]

tried again.

Cmd>task 28 55aa
Invalid command : task 28 55aa
For a help screen, use command ? or h

I'm in the 3 color mode screen and i see USB bottom left, so I think I'm hooked up OK.

[skearon]

Originally Posted by Jurassic Pork yeh i got the rom to install on it, went to soft restart it like it said, press 0 to conitinue, and wat a suprise a red, green and blue scrambled fuzzy screen, any ideas where to go now?

I had the same problem, in case this helps this is what I did

Brief history:
- Had working O2 XDA Exec, Bootloader 2.01
- Flashed Helmi's WM6 V1.1
- Flashed succeeded but on hard reboot stuck on Bootloader
- Carried out the task28 with mtty and flashed back with original O2 ROM (Xda_Exec_Upgrade_v113188.exe)
- Now have fuzzy screen
- Put into bootloader mode and rang mtty again task 28 command
- This time ran MaUpgradeUt_noID with Helmi's AKU3.5 ROM nk.nbf, his empty ms_.nbf extended rom and Radio 1.14 radio_.nbf files, i.e. to make sure all parts of rom were flashed (however O2's upgrade did say it was flashing radio, extended and normal rom)
- Hard Reset
- Booted up again :-)

I presume the O2 ROM is the problem ?

Machine is XP SP2, Activesync 4.5 and USB connection disabled in Activesync, using usb cable directly connected to PC not a hub.

[dutchschultz]

this is great, i tried to upgrade again to the new jwright wm6 rom.
the comp tells me it couldn't get my device info, and then my phones stuck in boot loader.. (boot loader v1.00) i followed these instructions and BLAM!
i'm now currently upgrading!

i reset my phone with no sd card ot sim card inside.
my phones in the bootloader sceen and the computer i had that mtty program running.. it didn't have a usb device to connect too, so i open task manager and closed the programs that i was adviced to close the rapidmgr and wnce.. whatev

re open mtty and i recognized there was somthing plugged into the usb port. typed that stuff in mtty and BLAM.. i get the success screen that we're provided a screen shot for.

retried the upgrade and it's now 50% completed upgrading the radio!

love this website, and all ya'll.