[ROM] Xperia1 FRX06 V.2-CWM (07.05.2011)

ufkozcan · 16th May 2011, 03:24 PM

Quote:

Originally Posted by Presko

Installation Guide in this post
__________________________________________________ ________
I`m having a strange problem with the NPK Loader after a few boots it starts to hang with Kernel panic after 5 sec of prebooting

how to injection this X1.FRX06.V2_07.050.11_ ??? in npkboot-cwm-v18_XPERIA1

shelter · 07:05 PM

Quote:

Originally Posted by ufkozcan

how to injection this X1.FRX06.V2_07.050.11_ ??? in npkboot-cwm-v18_XPERIA1

Press Volume Down ONCE during booting. It's very hard to see but when the screen clears and pauses during boot, press Volume down... then you will get a menu and you can continue following the guide mentioned in the first post.

I had a hard time figuring that one out...

dkn00b · 17th May 2011, 07:00 PM

1) Extract the X1.FRX06.V2_07.050.11_ and you should get couple of folders and one more zip " update-X1.FRX06.V2.(07.05.11) ".

Place "update-X1.FRX06.V2.(07.05.11)" file on your sdcard.

2) Extract "npkboot-cwm-v18_XPERIA1" and copy paste the npkboot folder into sdcard.

3) Run Haret.exe from within the npkboot folder and follow the rest of the instructions as given at the start of this thread

maikonzinho · 18th May 2011, 04:31 AM

wifi

any idea how to put wiki to work?

W0153R · 18th May 2011, 06:44 AM

Set static IP and it should work, if not reboot a few times, maybe try turning on wifi in winmo before starting haret.
I haven't got DHCP to work reliable on my phone..but that might also be due to my network.

shelter · 18th May 2011, 02:29 PM

Hmm... Call answer slider doesn't work. And hardware answer key doesn't work, so how do I answer calls?

neoofoox · 18th May 2011, 02:48 PM

I had this problem once, then i realised that the hardware keys stopped working. So you have to use the Turbo Kernel with keypad drivers as module and install it this way

shelter · 18th May 2011, 08:00 PM

Yes, but if you cant get past the answer slider you can't re-install them.. so it's a moment 22.

neoofoox · 18th May 2011, 08:16 PM

yes, that's right. I currently the only solution is to wait for the call end and press camera button to enable keys and call back or wait for a recall. But I had this problem only once. (I don't get much calls)