Search This thread

michaeljordam

Senior Member
Mar 16, 2011
171
18
Santo André
Last edited:

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,187
39,710
Pune
same here... no Deep Sleep :(

my CPU spy shows Deep Sleep as an Unused CPU State...

strange, must be the cause of my battery drain? i left wifi on all night can that be why?


I tried deep sleep, it lasted 2 seconds, it doesn't enter deep sleep if your playing music. Fast reboots below 10% battery


can u guys please post a few more details as explained here:
http://xdaforums.com/showthread.php?p=13886881#post13886881
 

BULL3TPR00F

Senior Member
Dec 6, 2009
1,054
149
Toronto
i was going to post what you asked like that but i havent done the exact steps you asked for yet (in terms of recalibrating the battery and minimal use n whatnot)

it was just a quick reference to see what my cpu has been doing. but i will test your steps when i can.
 
  • Like
Reactions: DooMLoRD

BULL3TPR00F

Senior Member
Dec 6, 2009
1,054
149
Toronto
also here is my results before and after the FPS uncap :D

Before:
t9idl3.jpg


After:
2edqiib.jpg
 

chiefy009

Senior Member
Oct 29, 2010
4,158
796
More info about random wlod they come in pairs get one rebooted another reboots then gone and rom is stable very strange

sent from my gingerbread powered c64 with NO wlod
 

Morbidx13

Senior Member
Dec 1, 2010
198
45
how are you guys getting passed the WLOD?
as soon as i installed it i started getting them and then constant reboots.
took me hours to get back to a working rom (which i'm still trying to do)
after many hours of attempting to get back to 2.2 i thought i would give this one another try and sure enough i get WLOD and the reboots start.
is there any way to stop this happening? currently this has been unusable for me which is a shame as it seemed to be really fast during the time it works
 

ad1stakt0s

Senior Member
Aug 2, 2010
82
4
Try install latest busybox as it mentioned before as a result or try what i did. Reduce CPU Max capacity to 998 than 1113. That solved mine wlod. Remember to put apply on boot.

Sent from my X10 using XDA App
 
  • Like
Reactions: Morbidx13

mama_mia

Senior Member
I've been using j020c k100 since it was released and i haven't had a wlod and just some reboots when the bat is low. Battery life is very good, i just took some screens to show you:
218y8.jpg


2n8mxhh.jpg


Today I were listening to music over bluetooth with parrot(about 1h30), wi-fi at university, played games, I made calls, sms, installed apps, 2g on, wifi always on so as bluetooth and gps, weather widget updating every 2 hours, screen light at 50%.

I think this version is very good.

Thank's J for all your and the team work.
 
  • Like
Reactions: DooMLoRD

Dicko21

Member
Jun 5, 2010
47
0
Melbourne
Is there any way to 'undo' that FPS-hack per say? Since using it I've noticed a huge decrease in touchscreen responsiveness and texting is now rather annoying as the keyboard doesn't respond well...
 

BULL3TPR00F

Senior Member
Dec 6, 2009
1,054
149
Toronto
should have done a backup so you can restore..

but you can just delete the lines from the build.prop and the init.local.rc files.

(i cant remember exactly what the lines are, if you scroll back a few pages to doomlords post you can see what it is)
 

egyptshun

Senior Member
Jun 30, 2010
659
266
Toronto
someone please pm me on how to install this with the kernel, im getting pissed at myself because this kernel s*&% is getting me mad like bruce banner...
 

dfan

Senior Member
Jul 13, 2010
95
10
Bug in WIFI

Two times I have gone to work only to find the phone stuck on the wifi AP from home, or vice versa.

It will not scan unless I disconnect/reconnect WIFI.

It doesn't happen all the time. When I came home this evening, it was normal.


Battery drain seems a bit high!


Only one crash in several days is just great!!!!

Proximity sensors fully operational = beer on the way, thanks J!!!!!! :)
 

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,187
39,710
Pune
someone please pm me on how to install this with the kernel, im getting pissed at myself because this kernel s*&% is getting me mad like bruce banner...

  1. Download release CM7 J020c K010 from 2nd post
  2. flash included baseband package using included flasher
  3. place the ROM's main update.zip file on SDCARD
  4. reboot into recovery
  5. Format SYSTEM / Format DATA / Format CACHE
  6. flash custom update.zip from sdcard
  7. select the update.zip u placed sdcard
  8. reboot device when flashing is over
  9. wait for a couple of reboots (2-3) to let device settle down
  10. check if u have radio signal (gsm/wcdma)

report back ur results on stability
 
  • Like
Reactions: egyptshun

Justinhopaolo

Senior Member
May 15, 2011
1,567
141
Why isn't my flash 10 not working?
... My battery doesn't last long enough... I can only max charge at 95%..

Sent from my X10 using Tapatalk
 

Justinhopaolo

Senior Member
May 15, 2011
1,567
141
  1. Download release CM7 J020c K010 from 2nd post
  2. flash included baseband package using included flasher
  3. place the ROM's main update.zip file on SDCARD
  4. reboot into recovery
  5. Format SYSTEM / Format DATA / Format CACHE
  6. flash custom update.zip from sdcard
  7. select the update.zip u placed sdcard
  8. reboot device when flashing is over
  9. wait for a couple of reboots (2-3) to let device settle down
  10. check if u have radio signal (gsm/wcdma)

report back ur results on stability

I have no idea how to use the baseband folder included in the rar.. so what I did was to flash other 52bb I got somewhere else in this forum..

Bad thing?

Sent from my X10 using Tapatalk
 

BULL3TPR00F

Senior Member
Dec 6, 2009
1,054
149
Toronto
its quite simple :S

open the baseband folder, launch the x10flash.bat file (or w/e its called)...

choose your option (1-4 depending on what your OS is)

connect phone in flash mode...

wait..

done..

quite easy...
 

DooMLoRD

Inactive Recognized Developer
Jul 27, 2010
13,187
39,710
Pune
I have no idea how to use the baseband folder included in the rar.. so what I did was to flash other 52bb I got somewhere else in this forum..

Bad thing?

Sent from my X10 using Tapatalk

YES!

1305691635-clip-48kb.png



just execute "X10flash.bat"


u will get a window as following:

1305691706-clip-8kb.png




now enter 1/2/3/4 based on ur OS (32/64 bit & WinXP/WinVista/Win7) and press enter...

now connect ur X10 in flashmode and then press enter...

flashing will now start..
 
  • Like
Reactions: Justinhopaolo

Top Liked Posts

  • There are no posts matching your filters.
  • 589
    ANDROID DEVELOPMENT (progress)
    -libril (precompiled)
    -lights (from source)
    -gralloc (from source)
    -audio (from source)
    -wifi (from source)
    -camera (from source)
    -bt (precompiled)
    -sensors (precompiled)
    -hotspot (precompiled / Select open from config menu)


    this progress is not affecting rom functionality or stability


    anyone willing to contribute can join on
    https://github.com/freexperia





    IF YOU LIKE TO DONATE
    https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC


    if any part of this software is copyright please pm and i will remove it
    i don't want to share anything that is considered ilegal !
    434
    ------------------------
    ****DEVELOPMENT****
    ------------------------


    DOWNLOAD
    Look in my signature !


    PLEASE DO NOT MIRROR MY ROMS !


    INSTAL GUIDE(thanks Colossus)
    http://xdaforums.com/showpost.php?p=17998666&postcount=12446

    if you can not see FreeXperia Logo on boot then you are on wrong SEMC Kernel and you need to flash included custom kernel


    BUGTRAKER
    http://code.google.com/p/freexperia/



    THIS IS AN UNIFIED WORK OF ALL DEVELOPERS CONTRIBUTING TO FREEXPERIA PROJECT


    cm7_1.jpgcm7_2.jpgcm7_3.jpg
    49
    CyanogenMod 7.2.2 Flashing Guide.

    - you must be on 2.3.3 FW (including 2.1.71 baseband), in case u are not use the provided baseband package..(baseband71 ftf) before u flash kernel package..

    - if you can not see FreeXperia Logo on boot then you are on wrong SEMC Kernel and you need to flash included custom kernel

    - Download The Rom..

    http://ul.to/folder/22vedc MIRROR http://fiberupload.com/users/jerpelea

    - - And Gapps...

    http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip

    - Unpack rar which contains 3 folders, from the FXP folder place the update zip onto your sdcard along with the gapps zip.

    - First you must have unlocked bootloader, use the unlock tool provided further help please with this direct to the relevant threads.

    - Here.. http://xdaforums.com/showthread.php?t=1253277

    - And... http://xdaforums.com/showthread.php?t=1254087

    - Use then the flashtool to flash the fxp ftf(X10-custom-ftf) this will provide you with the correct cwm recovery and kernel.

    - Reboot phone, keep pressing back key/volume down to enter recovery, from the menu wipe the device and caches then choose install zip from sdcard/choose zip from sdcard and select update-cm-7.2.0 and flash, again straight after do the same for gapps zip, now reboot phone.

    - Enjoy FXPCM7.:)

    - If you need more help please go to this thread....

    .. http://xdaforums.com/showthread.php?t=1284600

    - Discussion thread here...

    .. http://xdaforums.com/showthread.php?t=1322837

    DO NOT SPAM THE THREAD.

    .......................................................................................................................................................................................................
    47
    x10 camera is an #$%^&*(

    we have 8mp snaphot
    buggy for now 4/5 image ok
    45
    it could be too early to call it an progress but seems that our belowed WLOD is GONE

    we still have dalvik crashing in certain apps and we are triing to solve this too

    version 19 will be released probably in 10-12h so please dont spam! it is enough to hit thanks button


    almost final changelog for v019

    kernel-007
    -fixed kgsl for 1% performance gain
    -fixed iptables for droidwall
    -increased GPY mem from 2 to 5 mb
    -removed overclock
    -removed undervolt
    -Replace the implementation of the fsync(), fdatasync() and sync_file_range() with no-op.
    -writeback: change default dirty memory settings
    -use CFS scheduler
    -added cpu compiler optimisation
    -moved android console at lower address
    -reclaimed 1mb unused shared ram

    cm7-019
    -rebuilt from stable tree 7.0.3
    -compiled new WIFI optimised module
    -rebuilt entire device tree
    -fixed vibrator
    -Added SeTorch App Fork
    -fixed reboot loop on battery power
    -fixed webcore (hopefuly will stop wlods)