[ROM][UCKD5] Samsung Infuse 4G Stock rooted

---

Well, this is my first pass at this. I believe this is a valid Odin flashable tar. (First time making one)

Let me know if it works.

Disclaimer:
This ROM is untested and should be considered unsafe until someone is able to flash via one of the two methods below. CWM is not yet available. I know that a couple of people have soft bricked their phones which is why I'm making this available to try out. If you don't heed this warning, be prepared to innocently disavow any knowledge of why you are now holding a paperweight as you try to exchange your bricked device...

YOU HAVE BEEN WARNED!

Features:
-Based on the stock UCKD5 system dump obtained from my Infuse
-Rooted
-Busybox

Instructions:

Odin
This should be an Odin flashable file. Just unzip and grab the tar.

If you don't know how to use Odin, search through the forums, there is more than enough info out there.

OR


Heimdall

• unzip SGHI997_UCKD5_rooted.zip
• tar xvf SGHI997_UCKD5_rooted.tar
• heimdall flash --kernel zImage --factoryfs factoryfs.rfs --modem modem.bin --cache cache.rfs --dbdata dbdata.rfs --param param.lfs

Download:
SGHI997_UCKD5_rooted.zip
Sbl.bin, boot.bin, pit.pit are available in additional.zip
efs.rfs in efs.zip

Donations
I have been a quiet lurker for quite awhile. With this new device, I thought I could really contribute from the onset. A number of people have asked where to send donations... Don't feel obligated but if you really want to...

Trying this soon. You are a god among men if this works for me!

Originally Posted by Unkrash

Trying this soon. You are a god among men if this works for me!

you see bricks have there uses. you are the only one that is willing to test this. if you werent bricked you probably wouldnt!

Just wondering, don't I need a PIT file?

Originally Posted by Unkrash

Just wondering, don't I need a PIT file?

hopefully not. as long as you dont repartition it will run. if you still have a brick then maybe that is the next project for someone.

Latest issue:

<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.rfs
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Not sure if this is still just me or if it's a problem somewhere else.
Edit-It begins loading the cache (I see green!!) and then fails.

I have the following files as well, but they didn't seem to be necessary for Odin or Heimdall...

However, if someone wants them, I can post.

The files are:

• Sbl.bin
• boot.bin
• pit.pit

Maybe try posting up the .pit?

The additional files are attached to the first post.

im gonna try da_dr8's method to change the startup image in param.ifs

wish i had more confidence that the everything works before hand though