FORUMS

Analysis & Opinion

Top Forum Discussions

Flame Kitchen Tools Pre-Alpha v0.2

901 posts
Thanks Meter: 7
 
By CWKJ, Senior Member on 2nd September 2007, 04:22 PM
Post Reply Subscribe to Thread Email Thread
WARNING
A. USE AT YOUR OWN RISK OF BRICKING YOUR DEVICE.
B. Only try extraction on one FLAME WM5 NBA file.
C. Ignore nb0 to nba convert & flash part in Readme as it is still unknown. EDIT:They are the same


Consolidated by CWKJ

Many many thanks to all the people (long list of name) from XDA-DEV who have make the so many tools used here available.

The extraction part is an attempt by copying and adapt from SCOTER Kitchen by JKR I found in XDA-Dev.

The Add File, Delete File and Build is an attempt by copying and adapt from Laurentius Kitchen

Hope it is useful.


1. Extraction Steps,

i. Convert nk.nb0 or diskimage.nb0 file to nk.nba using "HTC64 Extended ROM Tool.exe". (WARNING: Have not try this as I do not have nb0 file and not sure the link between nb0 & nba, EDIT: they are actually the same, this step is not needed)

ii. Drag & Drop the nk.nba to Dump.lnk in "Extraction Room" to get Dump files in Tools (works with Russian Flame nk.nba file, download Flame_nk.rar from http://4pda.ru/forum/index.php?&showtopic=43333&st=60 or http://4pda.ru/forum/attach/839243/flame_nk.rar and extract nk.nba)

iii. If you want to view the Dump, make a copy from Tools to "Extraction Room".


2. Add Files

i. Using normal copy command, just add the Hibernate.exe file in Dump of Tools. (Example)


3. Delete Files

i. Using normal delete command, just delete the PMSN.cpl file in Dump of Tools. (Example)


4. Build (WARNING: Do not have the complete image in ROM XIP, Edit: http://xdaflameusers.com/viewtopic.php?id=256, Step 6i may brick your device)

i. After Step 2 & 3, run Package.lnk in "Extraction Room" to get Package files in "Extraction Room"

i. Copy the original nk.nba to Rom

ii. Copy Oem and Sys in Package to the Oem and the Sys in Flame Kitchen.

iii. In FlameKitchen, run BuildOs.exe, click the play button.

iv. After 4iii is completed with no errors, run CreateRom.cmd.

v. After 4iv is completed with no errors, you should see the new nk.nba.

vi. Convert nk.nba to nk.nb0 using "HTC64 Extended ROM Tool.exe". (WARNING: Have not try this as I do not have flashing tools, so not sure if this will brick your Flame, EDIT: They are actually the same, this step is not needed)


5. Check
i. To check if the files are added and deleted correctly into the new nk.nba by using the new nk.nba and go to Step 1ii.


6. Flash

i. No known tools yet. Edit: Flashing possible now, take care, http://www.xdaflameusers.com/viewtop...pid=2045#p2045

Edit: New development, http://www.xdaflameusers.com/viewtop...pid=2209#p2209
Attached Files
File Type: zip FlameKitchenPreAlphaVersion0.2.zip - [Click for QR Code] (922.3 KB, 464 views)
Last edited by CWKJ; 20th December 2007 at 09:21 AM.
 
 
3rd September 2007, 05:55 PM |#2  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
Flame Extraction Only Tools
WARNING
A. USE AT YOUR OWN RISK OF BRICKING YOUR DEVICE.
B. Only try extraction on one FLAME WM5 NBA file.
C. Ignore the nb0 to nba convert


Consolidated by CWKJ

Many many thanks to all the people (long list of name) from XDA-DEV who have make the so many tools used here available.

The extraction part is an attempt by copying and adapt from SCOTER Kitchen by JKR I found in XDA-Dev.

Hope it is useful.


Extraction Steps,

1. Convert nk.nb0 or diskimage.nb0 file to nk.nba using "HTC64 Extended ROM Tool.exe". (WARNING: Have not try this as I do not have nb0 file and not sure the link between nb0 & nba)

2. Drag & Drop the nk.nba to Dump.lnk in "Extraction Room" to get Dump files in Tools (works with Russian Flame nk.nba file, download Flame_nk.rar from http://4pda.ru/forum/index.php?&showtopic=43333&st=60 and extract nk.nba)

3. If you want to view the Dump, make a copy from Tools to "Extraction Room"

4. After Step 2 & 3, run Package.lnk in "Extraction Room" to get Package files in "Extraction Room"
4th September 2007, 01:18 PM |#3  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
No one try and feedback?
4th September 2007, 05:59 PM |#4  
c_shekhar's Avatar
Recognized Developer
Thanks Meter: 34
 
More
Good efforts. Dis-assembling is fine. But for re-assembling do you use scotter kitchen tools or something else inprovised by you??
5th September 2007, 04:50 AM |#5  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
For assembling, I modify a little from Laurentius Uni Kitchen.

Most of the tools are from the long list of gurus here, like Bepe, Buzz, Mamaich, etc.

If JKR's Scoter Kitchen way of assembling is friendly, I may try it out.
8th November 2007, 02:32 AM |#6  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
XIP found,
http://xdaflameusers.com/viewtopic.php?id=256
12th December 2007, 07:38 AM |#7  
Junior Member
Thanks Meter: 1
 
More
Today UP programer add 4400LOYTP0( Flame) in software
12th December 2007, 01:37 PM |#8  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
Quote:
Originally Posted by uni-tech

Today UP programer add 4400LOYTP0( Flame) in software

Sorry and pardon me, can I ask what is UP and what is 400LOYTP0
16th December 2007, 11:14 AM |#9  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
Some interesting development,
http://www.xdaflameusers.com/viewtop...pid=2209#p2209
29th December 2007, 06:08 AM |#10  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
Some changes but not finalized to the Kitchen,

http://www.xdaflameusers.com/viewtop...pid=2534#p2534
30th December 2007, 03:39 PM |#11  
CWKJ's Avatar
OP Senior Member
Flag Singapore
Thanks Meter: 7
 
More
Flame Kitchen Tools Pre-Alpha v0.3
http://forum.xda-developers.com/showthread.php?t=355286

Can some kind soul please close the thread "Flame Kitchen Tools Pre-Alpha v0.2"?

Thanks.

Read More
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes