[HowTo] use 3G Dongle on TF101 *UPDATED 04/13/2012*

Search This thread
By:
Advanced…
Kasimodo

Kasimodo

Senior Member
Dec 27, 2008
391
92
Android City
Hello,

(First sorry for my very bad english. It's not my natural language but I do my best for sharing with you!)

04/13 - UPDATE: Now 3G works for ICS with some ROMs like Megatron.
Revolver will be based on TF101G ICS ROM soon.


09/17 - UPDATE:Roach2010 and gnufabio have developped an apk that enable Mobile Network settings (for 3G dongle).
Their APK change the bootloader. (Read more and download)

So maybe this thread has no purpose except for issues and for the list of compatible dongles. If you have a dongle which work and which is not in the list.....

11/08 - UPDATE: 3G dongle works too with Extension-Kit/TFUSB1 Asus P/N 90-XB2UOKEX00020
You can find it here: http://shop.asus.fr/shop/fr/fr-FR/Home/1-Produits/1500-Collection-ASUS/1936-Accessoires-Eee-Pad/1937-Accessoires-Transformer-Prime-TF201/90-XB2UOKEX00070-Adaptateur-USB-externe-pour-ASUS-Eee-Pad.aspx (Thanks to ValenteL for information)

************************************************************

Bellow you can find the first post

Thank you,
Regards.

FIRST POST:

There is probably other ways to make the 3G Dongle working on TF101 but here you can find how we have done.


The follow lines work to have Prime v1.5 installed on your Transformer (works with any version!)
Then you could upgrade to Revolver 2.1.

Otherwise you can directly nvflash your TF101 with the Revolver 2.5 NVFlashed version of cuckoopt.
You just have to follow instructions on this post.
Don't forget to thank him if it works for you
Note: SetCpu doesn't seem to work. I don't know if the issue is coming from Revolver or HC. By re-installing SetCpu, it works one time then crashes.


A. Prime V1.5 Installation:

1. You have to backup all your data/apk from your Internal SD Card because we will make a clean install. So use your backup software.
Becareful. if you project to use Titanium Backup, his backup files are on the internal SD Card so afterwards, you have to move it to your MicroSD (from /mnt/sdcard/Titatium Backup to /data/Removable/MicroSD)

2. Download NVFlash: http://www.filefactory.com/file/ccda97c/n/nvflash.zip then the NVFlash version of Prime v1.5: http://www.sdx-downloads.com/devs/roach2010/flash_roms/prime_v1.5_nvflash.tar.bz2
Updated note: I am not able to activate the Mobile Network option with version 1.6 (even Zip version for ClockWorkMod nor NVFlash version).
But some people have succesfully activated it by flashing NetFinder 1.5 just after the fresh Install of Prime v1.6 and before rebooting the system ; it means in the same CWM

3. unpack NVFlash and Prime v1.5 in the same directory. The image files of Prime v1.5 should be unpacked into the NVFLashTF folder.

4. Connect your TF101 to your PC via USB. Then hold the volume UP and Power button until a NEW device named "APX" appears in the Device Manager. Note that the screen of the Transformer stays black.

5. Click on the APX to install drivers from directory USBPCDriver (included in NVFlash.zip)
info: I used Windows XP 32 bits.

6. Then run Download.bat if you are on Windows, download.sh for Linux users

7. When NVFlash is ended, reboot your TF101.
During boot, there is a setup wizard. Choose connection with "3G and Wifi", not "only Wifi"!!
At this step, you must have the Mobile Network option in Parameters.

8. Download Maxh2003 Script: http://android.modaco.com/index.php?act=attach&type=post&id=73836 (you need to be a register user on Modaco You could find another link some posts after!)
Download the Patch files for ACER A500 tab: http://xdaforums.com/attachment.php?attachmentid=638588&d=1309189189

9. Unzip the script and the Patch file in the same directory.

If you want to upgrade to Revolver 2.1 version (HoneyComb 3.2), you must stop here and go to step B (chapter B).
Otherwise continue chapter A.

10. Connect your TF101 and run install-TF101.bat

11. Mobile Network option is here.


B. REVOLVER 2.1 Installation

1. Do a fresh install of Prime v1.5 NVFlsh version.
If it's not the case go back to the begin of this post and execute steps A.1 to A.9. then go back to B.2
2. Download this file
3. If you read this, Prime v1.5 NVFlash version is installed and you are in CWM Recovery screen.
Install the Recovery 2.1 version (Full). DON'T WIPE DATA
4. At the end, just reboot your system and verify that Mobile Network option is still here.
5. Then we have to install drivers for your dongle (see the list below for compatible dongles).
Let your TF101 on, connect it to your PC via USB cable and run install-TF101.bat via cmd.exe from Windows (tested under Windows XP x86 and Windows 7 x64)


C. List of COMPATIBLE DONGLES

Note: if your dongle is not in this list, but works with TF101, please tell me. It will be added to the list.

* ZTE MF 639 (might need roaming enabled to get data working)
* Alcatel X225L (thx to urko95)
* Vodafone K3765-H
* Vodafone K3715
* Vodafone K3565 / Huawei E160
* Huawei E156G (thx to sh337 for testing)
* Huawei E160G (thx to htc-hd2. His post)
* Huawei E161 (thx to zumbik. His post)
* Huawei E169
* Huawai E170
* Huawai E171
* Huawei E173 (ATTENTION: E173 EVO version NOT COMPATIBLE - thx to sronweb for his tests - Read more)
* Huawei E180 (thx to ValenteL. His post)
* Huawei E220 (thx to eyz. Connexion seems to be not stable. Read more)
* Huawei E270 (thx to eyz. His post)
* Huawei E1550
* Huawei E1552
* Huawei E1692
* Huawei E1750
* Huawei E1752
* Huawei E1762 (thx to bennyyen. His post)
* Huawei E1820
* Huawei E1823 (Thx to bswpt. His post)
* Huawei E2010 (Thx to madangryscientis. His post)
* HUAWEI K3520
* HUAWEI K3565 -Rev 2
Click to expand...
Click to collapse



D. About LED on HUAWEI 3G Dongle:[/B]
The LED indicator displays the current connection status of your Orange E1752 dongle, with each colour representing a different status:

When the LED displays green and is blinking twice every three seconds, this means that the dongle is powered on.
When the LED displays green and is blinking once every three seconds, this means that the dongle is attempting to register onto a 2G network.
When the LED displays blue and is blinking once every three seconds, this means that the dongle is attempting to register onto a 3G network.
When the LED displays solid green, this means that the dongle is connected onto a 2G network.
When the LED displays solid blue, this means that the dongle is connected onto a 3G network.
When the LED displays solid cyan, this means that the dongle is connected onto a 3G+ network
When the LED displays no colour, this means that the dongle is removed.
Click to expand...
Click to collapse

And dont forget to turn off the composite device of the 3G dongle.

Here how to do (thanks to Matchstick from Modaco who wrote these lines):
You can test this by plugging the stick into a PC and seeing if it detects the modem as a CD or Memory stick device as well as a modem.

If it does then the method I used to turn off the composite device (on Windows 7) was:

1) Install the software and drivers for the modem under windows and make sure that the connection software sees the modem correctly.
2) Go to Settings/Control Panel/Device Manager and if you expand the Modems section you should see your USB modem listed there
3) Double click on the entry for the modem to get the properties panel up and selected the Modem tab
4) You should see a line at the very top of the tab that says something like Port: COM11 - This is the virtual serial port that the PC uses to talk to the modem which we're going to use to send the command to turn off all the stuff we don't want.
5) Next we want to install a serial console application. PuTTY is perfect for this. If you don't have a copy you can get if from here,
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
6) Run putty, select Serial under Connection Typem and enter the port we found in step 4 (eg COM11) into the box marked Serial Line and press the Open button
7) An empty window should pop up, which if things are working correctly is connected to the Modem
8) Type "ATI" into the window (without the quotes) and press return. The ATI command asks the modem for basic information and it should respond with something like
Manufacturer: huawei
Model: E1752
Revision: 11.126.03.01.314
IMEI: 123456789012345
+GCAP: +CGSM,+DS,+ES

OK
9) If you see this then you are connected correctly, if you don't see a response try physicaly unplugging and reconnecting the modem into a different USB port and start again from step 2 after windows has loaded the drivers for the modem.
10) Assuming everything is OK, the we can send the command to turn off the stuff we don't want. To do this simply type "AT^U2DIAG=0" (again without quotes) into the putty window. you should see the response OK.
11) If you do then the composite device features should now be turned off and you are ready to try the modem in your transformer.
Click to expand...
Click to collapse



Remerciements/Thanks to AndroidRoot.mobi for NVFlash, Paul for Prime!, Maxh2003 for his script and help, Matchstick for his help, Dexter_nlb for his A500 patch and, of course, all our developers and users who help us.
 
Last edited:
  • Like
Reactions: marcopolo, Salex_, decebal12345 and 16 others
Kasimodo

Kasimodo

Senior Member
Dec 27, 2008
391
92
Android City
It seems that these drivers don't work for win7 64 and works for Vista 64.
Perhaps they are unsigned.... didn't know. I don't make more tests.

Regards.
 
  • Like
Reactions: gvic1
N

nsec

New member
Jul 3, 2011
1
0
to kasimodo
Could you upload Maxh2003's scrift file here. I can't download it from your link.
Thanks
 
dan-htc-touch

dan-htc-touch

Senior Member
Dec 6, 2007
688
148
calgary
insmod is having no luck with these kernel modules, none are loaded, and I get nothing??? what's the deal? has anyone got this working including the OP or is this just a theoretical WIP
 
B

brensim

New member
Mar 10, 2009
2
1
many thanks! got it to work on my E1750 :)

although you might want to put the instruction steps to remove the storage on the modem (only works after I did it):

Insert modem into pc and wait for driver to install
check in device manager which com port is assignated to your modem
download putty
here the.earth.li/~sgtatham/putty/latest/x86/putty.exe
close every program related to modem
run putty
click serial below port number and then change port number to one previously founded
click open
write atz and press enter, modem should answer ok
write ati and press enter, modem should give name, type, etc
write AT^U2DIAG=0 and press enter, zero cd is now disabled
 
Last edited:
  • Like
Reactions: FabioRochapt
Kasimodo

Kasimodo

Senior Member
Dec 27, 2008
391
92
Android City
dan-htc-touch said:
oh... I guess insmod won't work on the modules without a compatible modem plugged in then?
Click to expand...
Click to collapse

Probably. is you 3G Dongle in the "compatibility list".
If yes, you have to turn off the composite device of the 3G dongle.

Here how to do (thanks to Matchstick from Modaco):
Code: 
You can test this by plugging the stick into a PC and seeing if it detects the modem as a CD or Memory stick device as well as a modem.

If it does then the method I used to turn off the composite device (on Windows 7) was:

1) Install the software and drivers for the modem under windows and make sure that the connection software sees the modem correctly.
2) Go to Settings/Control Panel/Device Manager and if you expand the Modems section you should see your USB modem listed there
3) Double click on the entry for the modem to get the properties panel up and selected the Modem tab
4) You should see a line at the very top of the tab that says something like Port: COM11 - This is the virtual serial port that the PC uses to talk to the modem which we're going to use to send the command to turn off all the stuff we don't want.
5) Next we want to install a serial console application. PuTTY is perfect for this. If you don't have a copy you can get if from here,
http://www.chiark.greenend.org.uk/~sgtatha...y/download.html
6) Run putty, select Serial under Connection Typem and enter the port we found in step 4 (eg COM11) into the box marked Serial Line and press the Open button
7) An empty window should pop up, which if things are working correctly is connected to the Modem
8) Type "ATI" into the window (without the quotes) and press return. The ATI command asks the modem for basic information and it should respond with something like
Manufacturer: huawei
Model: E1752
Revision: 11.126.03.01.314
IMEI: 123456789012345
+GCAP: +CGSM,+DS,+ES

OK
9) If you see this then you are connected correctly, if you don't see a response try physicaly unplugging and reconnecting the modem into a different USB port and start again from step 2 after windows has loaded the drivers for the modem.
10) Assuming everything is OK, the we can send the command to turn off the stuff we don't want. To do this simply type "AT^U2DIAG=0" (again without quotes) into the putty window. you should see the response OK.
11) If you do then the composite device features should now be turned off and you are ready to try the modem in your transformer.

Regards
 
Ivanovic

Ivanovic

Senior Member
Jun 6, 2010
951
305
Halkidiki
Google Pixel 5
Google Pixel 6 Pro
brensim said:
many thanks! got it to work on my E1750 :)

although you might want to put the instruction steps to remove the storage on the modem (only works after I did it):

Insert modem into pc and wait for driver to install
check in device manager which com port is assignated to your modem
download putty
here the.earth.li/~sgtatham/putty/latest/x86/putty.exe
close every program related to modem
run putty
click serial below port number and then change port number to one previously founded
click open
write atz and press enter, modem should answer ok
write ati and press enter, modem should give name, type, etc
write AT^U2DIAG=0 and press enter, zero cd is now disabled
Click to expand...
Click to collapse

What kind of OTG adapter are you using for this?
 
A

acid12

New member
Aug 13, 2008
1
0
Hi all,
will this work with the Huawei E173u2 , the second version adapted for (pseudo)"4G" networks
 
M

Matchstick

Senior Member
Aug 1, 2008
244
41
At the moment, everyone who has got this to work has had to install Prime 1.5 (and several of us had to install the NVFlash specific version of Prime)
 
M

Matchstick

Senior Member
Aug 1, 2008
244
41
acid12 said:
Hi all,
will this work with the Huawei E173u2 , the second version adapted for (pseudo)"4G" networks
Click to expand...
Click to collapse

Is this similar to the huawei E367 ? As I'm looking at the E367 at the moment.

One easy(ish) way to check is to follow Steps 1-8 from post 12, then enter the command "AT^GETPORTMODE" (without the quotes)

If you get a response like
"^getportmode:type:WCDMA:Qualcomm,MDM:0,NDIS:1,DIAG:2,PCUI:3,CDROM:4"
then the E173u2 is using the new interface like the E367 and at the moment I can't get it to work.
It may be that the drivers aren't compatible (I'm not seeing ttyUSB0-ttyUSB2 devices appearing in /dev/) or it may just be that I haven't got the correct interfaces enabled.
There's information on the AT commands for the new-style Huawei modems here
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=618504
 
  • Like
Reactions: Kasimodo
Kasimodo

Kasimodo

Senior Member
Dec 27, 2008
391
92
Android City
chrispazz said:
I am with stock 3.1 + root.
Does it work or I need to install PRIME anyway?
Click to expand...
Click to collapse

you can try by using Settings/Privacy then Reset to factory
Then restart and hen wizard ask you to choose for "3g and wifi" or "wifi only" choose 3g and wifi

Afterward you must see mobile network in settings.
tell us and don't forget to backup your data
 
C

chrispazz

Senior Member
Jan 4, 2006
172
8
Kasimodo said:
you can try by using Settings/Privacy then Reset to factory
Then restart and hen wizard ask you to choose for "3g and wifi" or "wifi only" choose 3g and wifi

Afterward you must see mobile network in settings.
tell us and don't forget to backup your data
Click to expand...
Click to collapse


Ok. I have to wait for my docking to come back from ASUS (RMA) and then I will try.

TY
 
You must log in or register to reply here.

Similar threads

Gary Key
Official ASUS Thread - ICS Update on TF101 (20-Mar-2012)
Replies
4K
Views
804K
pilotn
pilotn
T
[INFO] US Retail Availability (for Updates on Preorders and Purchasing)
Replies
11K
Views
1M
B
Bob Smith42
I
  • Poll
[TOOL]"1-Click Transformer Root"-Root/Unroot/cwm/stock rec-TF101(G)/201/300T(G)/SL101
Replies
801
Views
654K
M
mr_fosi
B
[GUIDE] 720p Handbrake preset for TF101 (HC3.1 Update)
Replies
371
Views
181K
L
Lethe6
E
Root ASUS Transformer TF101 On Android 4.0.3 ICS
Replies
14
Views
128K
RLShiftyDoggit
RLShiftyDoggit

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 19
    Kasimodo
    Kasimodo
    Hello,

    (First sorry for my very bad english. It's not my natural language but I do my best for sharing with you!)

    04/13 - UPDATE: Now 3G works for ICS with some ROMs like Megatron.
    Revolver will be based on TF101G ICS ROM soon.


    09/17 - UPDATE:Roach2010 and gnufabio have developped an apk that enable Mobile Network settings (for 3G dongle).
    Their APK change the bootloader. (Read more and download)

    So maybe this thread has no purpose except for issues and for the list of compatible dongles. If you have a dongle which work and which is not in the list.....

    11/08 - UPDATE: 3G dongle works too with Extension-Kit/TFUSB1 Asus P/N 90-XB2UOKEX00020
    You can find it here: http://shop.asus.fr/shop/fr/fr-FR/Home/1-Produits/1500-Collection-ASUS/1936-Accessoires-Eee-Pad/1937-Accessoires-Transformer-Prime-TF201/90-XB2UOKEX00070-Adaptateur-USB-externe-pour-ASUS-Eee-Pad.aspx (Thanks to ValenteL for information)

    ************************************************************

    Bellow you can find the first post

    Thank you,
    Regards.

    FIRST POST:

    There is probably other ways to make the 3G Dongle working on TF101 but here you can find how we have done.


    The follow lines work to have Prime v1.5 installed on your Transformer (works with any version!)
    Then you could upgrade to Revolver 2.1.

    Otherwise you can directly nvflash your TF101 with the Revolver 2.5 NVFlashed version of cuckoopt.
    You just have to follow instructions on this post.
    Don't forget to thank him if it works for you
    Note: SetCpu doesn't seem to work. I don't know if the issue is coming from Revolver or HC. By re-installing SetCpu, it works one time then crashes.


    A. Prime V1.5 Installation:

    1. You have to backup all your data/apk from your Internal SD Card because we will make a clean install. So use your backup software.
    Becareful. if you project to use Titanium Backup, his backup files are on the internal SD Card so afterwards, you have to move it to your MicroSD (from /mnt/sdcard/Titatium Backup to /data/Removable/MicroSD)

    2. Download NVFlash: http://www.filefactory.com/file/ccda97c/n/nvflash.zip then the NVFlash version of Prime v1.5: http://www.sdx-downloads.com/devs/roach2010/flash_roms/prime_v1.5_nvflash.tar.bz2
    Updated note: I am not able to activate the Mobile Network option with version 1.6 (even Zip version for ClockWorkMod nor NVFlash version).
    But some people have succesfully activated it by flashing NetFinder 1.5 just after the fresh Install of Prime v1.6 and before rebooting the system ; it means in the same CWM

    3. unpack NVFlash and Prime v1.5 in the same directory. The image files of Prime v1.5 should be unpacked into the NVFLashTF folder.

    4. Connect your TF101 to your PC via USB. Then hold the volume UP and Power button until a NEW device named "APX" appears in the Device Manager. Note that the screen of the Transformer stays black.

    5. Click on the APX to install drivers from directory USBPCDriver (included in NVFlash.zip)
    info: I used Windows XP 32 bits.

    6. Then run Download.bat if you are on Windows, download.sh for Linux users

    7. When NVFlash is ended, reboot your TF101.
    During boot, there is a setup wizard. Choose connection with "3G and Wifi", not "only Wifi"!!
    At this step, you must have the Mobile Network option in Parameters.

    8. Download Maxh2003 Script: http://android.modaco.com/index.php?act=attach&type=post&id=73836 (you need to be a register user on Modaco You could find another link some posts after!)
    Download the Patch files for ACER A500 tab: http://xdaforums.com/attachment.php?attachmentid=638588&d=1309189189

    9. Unzip the script and the Patch file in the same directory.

    If you want to upgrade to Revolver 2.1 version (HoneyComb 3.2), you must stop here and go to step B (chapter B).
    Otherwise continue chapter A.

    10. Connect your TF101 and run install-TF101.bat

    11. Mobile Network option is here.


    B. REVOLVER 2.1 Installation

    1. Do a fresh install of Prime v1.5 NVFlsh version.
    If it's not the case go back to the begin of this post and execute steps A.1 to A.9. then go back to B.2
    2. Download this file
    3. If you read this, Prime v1.5 NVFlash version is installed and you are in CWM Recovery screen.
    Install the Recovery 2.1 version (Full). DON'T WIPE DATA
    4. At the end, just reboot your system and verify that Mobile Network option is still here.
    5. Then we have to install drivers for your dongle (see the list below for compatible dongles).
    Let your TF101 on, connect it to your PC via USB cable and run install-TF101.bat via cmd.exe from Windows (tested under Windows XP x86 and Windows 7 x64)


    C. List of COMPATIBLE DONGLES

    Note: if your dongle is not in this list, but works with TF101, please tell me. It will be added to the list.

    * ZTE MF 639 (might need roaming enabled to get data working)
    * Alcatel X225L (thx to urko95)
    * Vodafone K3765-H
    * Vodafone K3715
    * Vodafone K3565 / Huawei E160
    * Huawei E156G (thx to sh337 for testing)
    * Huawei E160G (thx to htc-hd2. His post)
    * Huawei E161 (thx to zumbik. His post)
    * Huawei E169
    * Huawai E170
    * Huawai E171
    * Huawei E173 (ATTENTION: E173 EVO version NOT COMPATIBLE - thx to sronweb for his tests - Read more)
    * Huawei E180 (thx to ValenteL. His post)
    * Huawei E220 (thx to eyz. Connexion seems to be not stable. Read more)
    * Huawei E270 (thx to eyz. His post)
    * Huawei E1550
    * Huawei E1552
    * Huawei E1692
    * Huawei E1750
    * Huawei E1752
    * Huawei E1762 (thx to bennyyen. His post)
    * Huawei E1820
    * Huawei E1823 (Thx to bswpt. His post)
    * Huawei E2010 (Thx to madangryscientis. His post)
    * HUAWEI K3520
    * HUAWEI K3565 -Rev 2
    Click to expand...
    Click to collapse



    D. About LED on HUAWEI 3G Dongle:[/B]
    The LED indicator displays the current connection status of your Orange E1752 dongle, with each colour representing a different status:

    When the LED displays green and is blinking twice every three seconds, this means that the dongle is powered on.
    When the LED displays green and is blinking once every three seconds, this means that the dongle is attempting to register onto a 2G network.
    When the LED displays blue and is blinking once every three seconds, this means that the dongle is attempting to register onto a 3G network.
    When the LED displays solid green, this means that the dongle is connected onto a 2G network.
    When the LED displays solid blue, this means that the dongle is connected onto a 3G network.
    When the LED displays solid cyan, this means that the dongle is connected onto a 3G+ network
    When the LED displays no colour, this means that the dongle is removed.
    Click to expand...
    Click to collapse

    And dont forget to turn off the composite device of the 3G dongle.

    Here how to do (thanks to Matchstick from Modaco who wrote these lines):
    You can test this by plugging the stick into a PC and seeing if it detects the modem as a CD or Memory stick device as well as a modem.

    If it does then the method I used to turn off the composite device (on Windows 7) was:

    1) Install the software and drivers for the modem under windows and make sure that the connection software sees the modem correctly.
    2) Go to Settings/Control Panel/Device Manager and if you expand the Modems section you should see your USB modem listed there
    3) Double click on the entry for the modem to get the properties panel up and selected the Modem tab
    4) You should see a line at the very top of the tab that says something like Port: COM11 - This is the virtual serial port that the PC uses to talk to the modem which we're going to use to send the command to turn off all the stuff we don't want.
    5) Next we want to install a serial console application. PuTTY is perfect for this. If you don't have a copy you can get if from here,
    http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
    6) Run putty, select Serial under Connection Typem and enter the port we found in step 4 (eg COM11) into the box marked Serial Line and press the Open button
    7) An empty window should pop up, which if things are working correctly is connected to the Modem
    8) Type "ATI" into the window (without the quotes) and press return. The ATI command asks the modem for basic information and it should respond with something like
    Manufacturer: huawei
    Model: E1752
    Revision: 11.126.03.01.314
    IMEI: 123456789012345
    +GCAP: +CGSM,+DS,+ES

    OK
    9) If you see this then you are connected correctly, if you don't see a response try physicaly unplugging and reconnecting the modem into a different USB port and start again from step 2 after windows has loaded the drivers for the modem.
    10) Assuming everything is OK, the we can send the command to turn off the stuff we don't want. To do this simply type "AT^U2DIAG=0" (again without quotes) into the putty window. you should see the response OK.
    11) If you do then the composite device features should now be turned off and you are ready to try the modem in your transformer.
    Click to expand...
    Click to collapse



    Remerciements/Thanks to AndroidRoot.mobi for NVFlash, Paul for Prime!, Maxh2003 for his script and help, Matchstick for his help, Dexter_nlb for his A500 patch and, of course, all our developers and users who help us.
    View
    9
    C
    cuckoopt
    Here it is guys
    http://www.megaupload.com/?d=9QKA9UA1

    1st of all download and extract it
    oh... dont forget to backup your apps if u want (using something like titaniumbackup)

    So here is the how to install the rom:

    1- Connect your TF101 to your PC via USB. Then hold the volume UP and Power button until a NEW device named "APX" appears in the Device Manager. Note that the screen of the Transformer stays black.

    2- Click on the APX to install drivers from directory USBPCDriver (included on the downloaded files)

    3- Pun the runme.bat that is inside of the folder

    if u want to backup the rom files continue this steps, if u dont jump to step 7
    4- Select the Backup option

    5- Select the Rom Files option
    It will backup the files related to the rom, if u wanna backup media this way, just start over the step 1 and choose Media Files instead of Rom Files on this step​

    6- Put your TF101 in APX mod again (hold the volume UP and Power button a few seconds)​

    7- Select the Install Revolver 2.5 option

    8- Wait till the installation its done and the TF101 reboot

    9- Configure your TF101 after his first boot (Dont forget to select Mobile Network + WiFi)

    10- Make sure u havel Asus Sync and running on your pc, if u dont download it here http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download (its under Utilities)

    11- Make sure u have USB debugging checked on ur TF101 (ist under Settings > Applications > Development)

    12- Then open Asus Sync on your TF101 (there is an icon on the "status bar" of the asus sync that appears when you are connected with the usb)
    Make sure it's synced with your PC, if it isnt u will have to keep trying​

    13- Finally Back to your PC, inside the runme.bat go to the Install option

    14- Then go to the Install 3g script option

    15- When it completes just reboot the TF101, configure the APN and thats it!!
    ​


    This works his based on all former devs of this thread had made, if u like it, support and thanx them!
    View
    2
    Kasimodo
    Kasimodo
    nsec said:
    to kasimodo
    Could you upload Maxh2003's scrift file here. I can't download it from your link.
    Thanks
    Click to expand...
    Click to collapse

    Here the file.
    Regards
    View
    2
    Kasimodo
    Kasimodo
    michadreyer said:
    yes its working fine with the nvflash-version from cookopt. and its very easy.
    there is no need to install the 3G-enabler with his flash-programm.
    perhaps you make a link it at your first post.
    Click to expand...
    Click to collapse
    Indeed I will add it. (His nickname is cuckoopt)
    michadreyer said:
    he is also working at dualboot for android and ubuntu.
    thanks Kasimodo for your thread. without this, i was not able to get 3G .
    Click to expand...
    Click to collapse
    So don't forget to click the THANK button ;-)
    View
    2
    Kasimodo
    Kasimodo
    eyz said:
    Managed to get a 8 digit pin get passed it by using the unlock method found online. That's a device unlock Pin. However, I am still getting the blinking blue led. Will try it again tomorrow when I get my dock fully charged.
    Click to expand...
    Click to collapse

    You just have to use your SIM into your phone and unlock PIN. Then just add your SIM card in your 3G Dongle and it must work. not?
    View

New posts