[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release
FRX07.1 is here!!
This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).
Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!
<<<This is a link to the... FAQ
I have created a complete bundle of FroYo with a stable kernel from GIT (August 19 / 1348), and rootfs from GIT (Sept. 2).
Please, feel free to DONATE to the XDAndroid project!
Every little bit helps!
1. Download the full bundle (zip).
(Updated September 1 2011)
If instead you just want the system.ext2 (zip)
(Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!
2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root
of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.
3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ
), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)
4. Screen calibration - you have three choices:
- Re-use an old ts-calibration file if you have it and you know it's good.
- Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
- Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one ), reboot & go back to the newest kernel!
6. Run haret.exe.. Profit!
Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service
to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.
See Incremental Updates
for more information on updating the kernel and other components.
Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!)
, Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.
Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool
- do a full format, FAT32.
Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE
before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.