I know I'm not in nexus forum but has anyone ever expirienced the msl not working? I got mine from ril.MSL enter it when asked and it shoots me back to menu. Everytime. Does nothing. Nonrooted

Sent from my Nexus S 4G using xda premium

Are the values supposed to change for the 3g tweak? I'm running RandomRom Hawk V2 and it only shows <not set> under the header but when I open to check it shows the values I entered. Is this normal?

EDIT>>> Please ignore the last question. For anyone on GB 2.3.4 I did my own testing with Speed Test and found that the 3g boost from zeppelinrox w/out the data tweak worked much better than anything else (.7 mbs compared to .5 mbs avg). I'd like to thank Random for an amazing ROM here since I don't have enough posts to do it in the development section!

This has worked very well for me. I did it months ago and never lose 4G inside my house anymore

Sent from my SPH-D700 using xda premium

this is the right way
thanks

Originally Posted by Robalboa

this is the right way
thanks

For those having issues with connect bot. please keep in mind that ril.MSL you must capitalize MSL or it will not give you the MSL

Nexus S 4G?

---

How can I do this on the Nexus S 4g?

---------- Post added at 03:32 PM ---------- Previous post was at 02:35 PM ----------

[/COLOR]

Originally Posted by evilsock

ive typed getprop in connectbot and better terminal emu and i cant find ril.msl anywhere, could it be that it changed in ec05? ive checked the whole list of words

not sure if your figured it out yet, as i havent had time to read all the posts here..

But type getprop ril.MSL just like that and it will automatically give you the MSL number..

Sense I'm nowhere near a 4g area I only did the 3g port fix described in post #81.
I actually fixed and returned to stock several times and ran speed test each time.
I followed the exact same procedure each time. Power off, reboot fully, task mgr clear memory then run speed tests. All tests were pinged to the same host.

The results:
Stock 5 test average.........Highest...........Lowest
Ping=175.4ms...................239................ 132
D/L =83.2kb/s...................125.3.............51.4
U/L =47.4kb/s...................61.1...............40.0

Fixed 5 test average
Ping=187.8ms....................306............... .115
D/L =52.9kb/s....................97.7...............20.3
U/L =46.6kb/s....................56.5...............37.0

Returned to stock
6 test average
Ping=209.3ms.....................304.............. ..131
D/L =99.2kb/s.....................182.4.............33.2
U/L =37.9kb/s.....................68.3...............19.1

Fixed 6 test average
Ping=128.5ms......................143............. ...102
D/L =68.1kb/s......................112.6.............46.8
U/L =37.8kb/s......................58.2...............17.6

Returned to stock
3 test average
Ping=217ms.........................294............ ....126
D/L =62.4kb/s......................86.5...............32.3
U/L =58.9kb/s......................72.5...............47.3

Fixed 3 test average
Ping=150ms.........................196............ ....119
D/L =82.3kb/s......................98.0...............66.2
U/L =44.7kb/s......................48.5...............42.5

My conclusion is, at least in my current location, that the 3g port fix had no effect on signal strength, stability or speed. I'll have to give it a try in other locations.
Here at the house the signal strength ranges from 0-3 bars. Stability is not great and will fluctuate constantly most of the time, but average 1-2 bars.

Not sure if this means anything to anyone, but those are my results. Just thought I'd share.

I know this is a resurrected old thread, but thanks for the info, it was fun play'n with it.

How do I go about this with Gingerbread? ##3282# brings up a Data Programming menu with View and Edit.

EDIT:

Never mind... figured it out. Do the below but type in -110 not -00110 as you might expect.

Originally Posted by dsummey30

hey guys on dk28 rooted stock rom I got my msl and then went to do the ##3282# and then i have view and edit and the only option for wimax is view. When I get in after entering my msl I find the two fields and enter the -110 and then the other number and it doesnt keep the values afterwards. should there be 0's in front like what is there now or is it just -110.

Thanks, guys for any help you can give.

Hey guys got it working had to reenter the numbers again back to back didnt take the 1st time just disconnected 4g so just tried it again and they took the 2nd time. so try that if you notice it not taking the values at 1st just put them right back in.