ok so i done it worked ok
would not recomend this for anyone and if you do its your fault
tools i used few screwdrivers tweezers scalpel cleaning cloth screen cleaner
small tray to work on , lil bag for screws
1. switched off phone , removed back cover , memory card , sim and battery
2. carefully removed the 6 screws and put in bag, the removed the backplate was a pain but managed without breaking it.
3 next there was a connection at top and on left hand side to disconnect , all so the headphone connector comes off , then you can take the motherboard off.
4. now it got tricky !very small part with a 9 on it pull the black tab up and leave it lose . i heated the front up a bit for next bit then gently got the digitizer lose it has some clips at bottum so start at the top .
5. cleaned a finger print off the lcd and replaced with new one , rebuild and was surprize it worked tbh
enjoy the pictures