FORUMS

Analysis & Opinion

Top Forum Discussions

[ROM][2.3.7]CyanogenMod 7.1 KANG & ClockworkMod 5.x for Galaxy Gio (RC-3.0)

425 posts
Thanks Meter: 2,086
 
By phiexz, Senior Member on 8th November 2011, 02:07 AM
Thread Closed Subscribe to Thread Email Thread
Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO
Based on Cooper, Tass & Galaxy 5

NOTE: This project is not finished yet and i am not maintain this Cyanogen Mod 7.1.0 again.
go to This Thread for latest CyanogenMod ROM

THE ONLY RULE ON CYANOGENMOD: YOU DONT ASK FOR ETA

Current status:

Working:
  • RIL
  • ext4 on all internal partition
  • Audio
  • capasitive key & back light
  • Proxomity sensor
  • Microphone
  • Root & Busybox
  • Setup wizard
  • included gapps
  • autorotate
  • packet data
  • GPRS &EDGE (2G)
  • HSDPA & UMTS (3G)
  • Call, sms & mms
  • GPS
  • Swap support
  • usb mass storage
  • headset button. so u can play/pause music & goto next song from this button
  • Bluetooth
  • Wifi
  • FM Radio (Bluetooth must enabled)
  • Camera & Video record
  • Wired Tether using wiredtether.apk (see post & attachment on second post)
  • Access Point / Portable Hotspot
  • automatically configured APN
  • Hardware video acceleration
  • and more

Not working:
  • ----

Issue:
  • Backlight after set brightness
  • some option on setting
  • noise on FM radio

if u find any bug, please tell us

I am not responsible for any damage to your phone
please read carefully how to install

How to Install
Code:
- Download & flash px-cwm-v2.zip from recovery or cwm recovery
- Reboot to cwm recovery again
- Download & flash px-cm7-RC-3.0.zip from cwm recovery
- Reboot your phone
- Its not recomennded to use live walpaper, u should use static walpaper. since live walpaper will make your device hot & drain more battery
- Since this version is not include gapps & a2sd, u should read gapps & s2e section!
- for alternative a2sd, u also can use link2sd or mad2sd

How Install google apps (gapps):
Code:
- Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
- Download latest version for cyanogenMod 7
- Flash it from cwm recovery
How to Install & Enable Simple2Ext (S2E):
Code:
- install it from market. be sure u've install gapps before!
- open s2e, and press menu and choose setting
- checklist the advance mode, extended partitions info, mount as ext4
- u also can set read buffer. i'm using 3Mb
- press back, and press menu -> reboot
- if your phone not automatic reboot, u should reboot it manually
- after reboot, open s2e again. u can check whatever u want
- i'm check it all, except Application data (Application data = a2sd extream datasd)
- reboot again
- u need to modified 02gio. see this post http://forum.xda-developers.com/showpost.php?p=19792902&postcount=705

have problem cant checklist application, dalvik-cache, private-apps application-data on s2e after checked mount as ext4 and reboot?
you must format your second partition using computer as ext4
u can use gparted (linux) or minitool partition wizard (windows)
How Enable a2sd:
Code:
- goto terminal emulator
- write:
  su
  a2sd zipalign
  a2sd cachesdreset

and:

if u want use a2sd extream (move data to sd-ext):
a2sd datasd
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

Additional Feature from member & developer
  • Randomboot animation & market v 2.3.6 by squadzone -> here
  • Stock samsung keyboard on cm7 by belyava -> Here
  • Transparent Touchwiz (samsung home) by shiftyHungary -> here

Source: https://github.com/phiexz

please help us to develop this rom, and tell us if you found another bugs
Last edited by phiexz; 16th February 2012 at 12:58 AM.
The Following 94 Users Say Thank You to phiexz For This Useful Post: [ View ]
 
 
8th November 2011, 02:07 AM |#2  
phiexz's Avatar
OP Senior Member
Flag Bandung~
Thanks Meter: 2,086
 
Donate to Me
More
Changelog & Download link
Changelog

New CWM v2
special thx to ZimniY
  • fix error mount command
  • remove rfs support

New RC 3.0
  • new build (new feature like: can change network preferences, minimal ring lockscreen, etc)
  • include all fix
  • removed a2sd (better use s2e than a2sd)
  • removed gapps
  • removed no-frills (use cm-setting to change cpu min max & governor)
  • smoother
  • better ram management (kernel patch)
  • fix cm-setting for change min & max cpu frequency (kernel patch)
  • revert backlight. sometime led cant off after set brightness. restart to make it normal again
  • update default governor to: ondemand min:245Mhz max:787Mhz
  • and more
note: this version is not coming with google apps, u should download & install it manually
note: this version is not coming with preinstalled a2sd DarkTremor. better to use s2e a.k.a simple 2 ext. download it from market!

New RC 2.0
  • Fixed Access Point / Portable Hotspot now u dont need 3rd application
  • modified many library, thx to squadzone
  • reduce noise when listen FM-Radio
  • Fixed new market for Force Close. now u can use new market
  • change a2sd mountpoint from /system/sd to /sd-ext
  • trying to patch backlight again, please check & report!
  • Change dafault cpu clock & governor to: min:245 max:787 gov: interactiveX
    if you dont like this governor, try to change with no-Frills application

- New Patch 2.2
  • fixed camera orientation on cm7 camera application (thanks to demon-e398)
  • fixed automatic APN setting
    goto setting -> wifi&network -> mobile network ->access point name - press menu button & tap to Reset to default
  • Deleted wiredtether.apk from /system/app
    you should install it as usual don't push to /system/app, download it from attachment below
  • kernel updatet (cf-root release 5)
    • Busybox upgraded from 1.17-> 1.19-CM71-bionic
    • Latest Superuser.apk & su binary

- New Patch fix-2, Camera & backlight fixed & added new boot script
thx to galaxy gio cummunity @ facebook for camera, waqasshahzad1986 for backlight issue fix & squadzone for boot script
- New Patch fix-1, it should fix a2sd DarkTremor, bluetooth, wifi & FM-Radio
- New Kernel px-cm7-kernel+cfroot-release-3.2 fixed backlight issue, sometime backlight still on even screen in locked
- First version Relase (beta)


Download Link

ClockWorkMod Recovery 5.x
Based on particle's CWM Recovery, only add ext4 support for system, data & cache
px-cwm-v2.zip Download here [New]
px-cwm.zip]Download Here [outdated]

CyanogenMod 7.1 for Galaxy GIO
cyanogenMod 7.1 RC 3.0 Download Here [New]
cyanogenMod 7.1 RC 2.0 Download Here [outdated]
First release, Download Here [outdated]

Addons & Patchl
px-cm7-addons-fix-2.2 Download Here [outdated]
px-cm7-addons-fix-1 Download Here [outdated]

-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Alternatiive kernel
It's outdated... please dont use this kernel. new kernel is included on addons

we use alternative kernel, it's based on SGA & SGS CF-Root Kernel. because we have a problem on CM7 initramfs kernel on our device. maybe it'll fixed soon.
tempoary, use this kernel to make your phone bootup

px-cm7-kernel+cfroot-release-3.2 Download Here [outdated]
px-cm7-kernel+cfroot-release-3.1 Download Here [outdated]
Attached Files
File Type: apk WiredTether.apk - [Click for QR Code] (268.4 KB, 1766 views)
Last edited by phiexz; 28th November 2011 at 11:37 PM.
The Following 45 Users Say Thank You to phiexz For This Useful Post: [ View ]
8th November 2011, 02:08 AM |#3  
phiexz's Avatar
OP Senior Member
Flag Bandung~
Thanks Meter: 2,086
 
Donate to Me
More
special thx
special thx to:
Hyriand for kernel source & CWM
squadzone i port this rom with him
Chainfire and ketut.kumajaya for CF-Root kernel, i'm ported theirs kernel
Grif_07 and BehradGH and tj_style for their cyanogenMod 7, some lib & file based on their work
Last edited by phiexz; 28th November 2011 at 11:41 PM.
The Following 30 Users Say Thank You to phiexz For This Useful Post: [ View ]
8th November 2011, 02:22 AM |#4  
phiexz's Avatar
OP Senior Member
Flag Bandung~
Thanks Meter: 2,086
 
Donate to Me
More
Some screen shoot

Last edited by phiexz; 28th November 2011 at 11:42 PM.
The Following 32 Users Say Thank You to phiexz For This Useful Post: [ View ]
8th November 2011, 02:45 AM |#5  
millionsun93's Avatar
Member
Thanks Meter: 8
 
More
waiting......
The Following User Says Thank You to millionsun93 For This Useful Post: [ View ]
8th November 2011, 03:55 AM |#6  
Darkshado's Avatar
Senior Member
Montréal
Thanks Meter: 490
 
Donate to Me
More
phiexz: do you guys have a Git repo I could take a look at?

I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:

make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.

Thanks in advance,

Darkshado
The Following 2 Users Say Thank You to Darkshado For This Useful Post: [ View ]
8th November 2011, 04:21 AM |#7  
Senior Member
Flag LaLaLa land :)
Thanks Meter: 30
 
More
Wow, ss looks nice a pity im not a developer, and i cant help u guys
The Following 2 Users Say Thank You to shuegig For This Useful Post: [ View ]
8th November 2011, 04:23 AM |#8  
falqon's Avatar
Senior Member
Flag Pontianak-West Borneo
Thanks Meter: 27
 
More
Talking
phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!
The Following User Says Thank You to falqon For This Useful Post: [ View ]
8th November 2011, 05:49 AM |#9  
phiexz's Avatar
OP Senior Member
Flag Bandung~
Thanks Meter: 2,086
 
Donate to Me
More
we need some one can make cyanogen initramfs for this rom

Quote:
Originally Posted by Darkshado

phiexz: do you guys have a Git repo I could take a look at?

I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:

make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.

Thanks in advance,

Darkshado

no i dont have cm7 github, i only have kernel github

Quote:
Originally Posted by falqon

phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!

its upto you, u can use ext2 or ext2
Last edited by phiexz; 28th November 2011 at 11:42 PM.
The Following 5 Users Say Thank You to phiexz For This Useful Post: [ View ]
8th November 2011, 07:17 AM |#10  
Senior Member
Flag Jakarta
Thanks Meter: 96
 
Donate to Me
More
Good work, mr Andika.

we hope that CM7 for gio will not get the dev out in the middle of its way
8th November 2011, 08:57 AM |#11  
Senior Member
Thanks Meter: 120
 
More
Whats the clock speed of the cpu. ur scores are pretty high. I m using the 2.3.4 particle with 902 mhz but unable to get such a high score. i scored about 2087

Read More
Thread Closed Subscribe to Thread

Tags
cyanogenmod, cyanogio, s5660
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes