Originally Posted by Jonous

Kevin i bought one but still connection tends to lose sound quality with too much "noise garbage" in it. Can you tell me with which radio have you been using it with? Is it the 1600 of the rom in your signature?

Thanx

Hi Jonous,

I'm using it with the other radio - what was effectively the 'Italian' stock radio 0300.76

It's difficult to compare notes with this sort of thing remotely... but I'd confrm that there is 'some' degree of background noise present even on this high-end BT headset device when compared direct to a hard wired uUSB connection (into the same earphones - per my sig). Like any audio device, I'd recommend keeping the volume level on any element in the chain to < 60% in order to keep noise down.

DEspite the above, I'd regard the MW600 as a quite capable piece of kit in conjunction with the TG01 giving extra flexibility - but it is a trade-off to some extent with quality.

Originally Posted by kevinpwhite

Hi Jonous,

I'm using it with the other radio - what was effectively the 'Italian' stock radio 0300.76

It's difficult to compare notes with this sort of thing remotely... but I'd confrm that there is 'some' degree of background noise present even on this high-end BT headset device when compared direct to a hard wired uUSB connection (into the same earphones - per my sig). Like any audio device, I'd recommend keeping the volume level on any element in the chain to < 60% in order to keep noise down.

DEspite the above, I'd regard the MW600 as a quite capable piece of kit in conjunction with the TG01 giving extra flexibility - but it is a trade-off to some extent with quality.

Hehe i feel like an idiot, i enbarked on an endless journey of flashing and flashing different radios and trying out the sound quality of each one cause bt headset is very important for me. When i got to 0300.76 suddenly sound was crystal clear! On the 1st test call. On the second call i was bearly heard, crappy sound again. Then it it struck to me...I remembered that sometimes when you press the answer call button of the headset the sound is transfered to the phone...I thought "no it can't be...if this is it i'm a real idiot!!!" And yes, when i pressed the button again sound was transfered to the headset and sound was magnificent! So the lousy sound i got with all other roms was because i was trying to be heard through the phone's micrphone which was some 2-3 away from me hahaha so other end of line heard little or nothing.

Well enough said, this headset is brilliant, loud n clear sound, caller id, fm radio everything! well almost, i wish it had vibration too but don't care, i'm happy with my buy! Thanks again

Originally Posted by Jonous

.....Well enough said, this headset is brilliant, loud n clear sound, caller id, fm radio everything! well almost, i wish it had vibration too but don't care, i'm happy with my buy! Thanks again

You are most welcome - I'm delighted you are up and running and happy with the S-E MW600 headset. There are so many variables with these things as well as the subjective element wjhen it comes to perceived audio quality that it is difficult to translate one person's experience to another. Great news

the Sony MW600 is really great !

But don´t forget to increase the bitrate of the streaming codec.
I modified/added this values in HLKM\Software\Microsoft\Bluetooth\A2DP\Settings

BitPool 65
MinSupportedBitPool 65
MaxSupportedBitpool 65
SampleRate 48000
SubBands 8
Blocks 16
Allocation 1
UseJointStereo 1


Unfortunately Track names are not submitted like with SE or some HTC phones

Hi Friends!!!

I have also the same problem with a BT car.

And the problem is like it´s been described (sound very loud in the microphone)....

I remember that in my I780, I changed some settings (don´t remember if it was in Hardware or registry).

Anyone had a solution?