Originally Posted by ardatdat

An updated version without autogroup scheduling is updated in post #1.

Also, the ODIN3 flash-able version is also uploaded.


Please test whether v1.3A is more stable.

It seems to be better , It's more stable! differences are still present though.

Few quadrant tests in a row: (max 1350 interactive)

3300, 3600, 4057, 4297, 3660, 1653 - variations are still significant. Two extreme values. I've never had that high score but...never that low either. (With original frequencies (stock kernel) it was the interval 2890-3440, Thus standard deviation is here noticeably higher) It's just quadrant. The most popular/basic benchmark. Its scores say nothing about general performance but...these relatively big differences among random scores are interesting.

Linpack (single thread, MFLOPS):
28, 38, 52, 53, 32, 27, 49, 34, 21, 54 - a lot of extreme values

Antutu (v. 2.5)
6066, 6046, 6189 - here is quite stable, (variations depend mostly on reading/writing speed of my SD (which is crappy))

CF - very stable, never goes under 7100!

Smartbench 2011/2012. It's still significantly worse than on your november version especially in terms of gaming. We have always had great results in this index (far better than sgs II). Now it's at least 300-400 units less. But no big variations noticed here. Scores are just lower. (So maybe it's just my handset that performs so)

hi all,

i'm still using version 2.3.4 and kernel 1.2 ardatdat..

can I flash both (kernel and KK5 together) via ODIN 1.85?

Originally Posted by krobar77

hi all,

i'm still using version 2.3.4 and kernel 1.2 ardatdat..

can I flash both (kernel and KK5 together) via ODIN 1.85?

Flash CWM first.
Then back up ur 2.3.4.
Then flash 2.3.6.
reboot.
Then flash kernal.

Originally Posted by s4sixty

Flash CWM first.
Then back up ur 2.3.4.
Then flash 2.3.6.
reboot.
Then flash kernal.

oic.. thanks bro..

I got CWM already..

so meaning is like below steps?

-> install CWM 1st..
-> backup current rom via CWM
-> flash 2.3.6 via ODIN
-> REBOOT
-> flash kernel via ODIN
-> REBOOT

After series of testing, the v1.3A should be more stable.

Originally Posted by krobar77

oic.. thanks bro..

I got CWM already..

so meaning is like below steps?

-> install CWM 1st..
-> backup current rom via CWM
-> flash 2.3.6 via ODIN
-> REBOOT
-> flash kernel via ODIN
-> REBOOT

U can omit installing CWM.
The rest of the steps are spot on.

Do take note u will have to flash CWM everytime u flash a new ROM.
Unless the ROM includes CWM by default.

Cheers !

Originally Posted by s4sixty

U can omit installing CWM.
The rest of the steps are spot on.

Do take note u will have to flash CWM everytime u flash a new ROM.
Unless the ROM includes CWM by default.

Cheers !

Flashing the ROM does not necessary overwrite the CWM recovery.

In theory, flashing the ROM itself overwrites the things in /system/ only and should not alter the radio, kernel, recovery, data, etc...

Originally Posted by ardatdat

Flashing the ROM does not necessary overwrite the CWM recovery.

In theory, flashing the ROM itself overwrites the things in /system/ only and should not alter the radio, kernel, recovery, data, etc...

yep u re correct..

like my previous x10 everytime I flash never version of ROM and kernel or baseband.. it would not overwrites my CWM... or have to install it (CWM) again

Originally Posted by ardatdat

Flashing the ROM does not necessary overwrite the CWM recovery.

In theory, flashing the ROM itself overwrites the things in /system/ only and should not alter the radio, kernel, recovery, data, etc...

Our i9103 Samsung stock firmware roms always contain:
recovery.img
boot.img
modem.bin

Happy New Year, Master!

Originally Posted by legion1911

Our i9103 Samsung stock firmware roms always contain:
recovery.img
boot.img
modem.bin

Happy New Year, Master!

I know, but it is just packed into the tar file
We should just take out the factoryfs.img (/system/) for just flashing the ROM

Happy new year, Super master!