Coolech 1FA-09D based board problem

---

Hi.

I have Coolech 1FA-09D based board with Hisilicon Hi3716C chip on it. It's android based media player. Full system flash was performed on the device, but firmware flashed was wrong, so device is now useless.

It stops at boot screen (not android, but bootloader). On device I have 2 available usb ports, but I asume those are host ports, not to be connected to PC. On PCB I have 4 pin connector, but don't know what kind of connector that is. At the moment I have no documentation for the box.

Company that I got box from will provide me original firmware, but how I'm going to flash it? Any ideas? Fastboot as far as I know works only with usb connected devices. ADB can't connect to device trough lan cause no adb server is running on the other side (box get's its own IP address and does some other initialisation which includes usb ports and then freezes).

The 4 pin connector is a serial console, but be carefull, its 3,3V logic and not RS232! So you need a level converter or usb ttl converter cable like for a old cellphone or something. Then within uboot you could load the firmware from tftp or upload it with xmodem.

Could you please send me the firmware? I would be very interested in it . (Or just upload it somewhere like filesonic)

Thanks.

Originally Posted by Megabug

The 4 pin connector is a serial console, but be carefull, its 3,3V logic and not RS232! So you need a level converter or usb ttl converter cable like for a old cellphone or something. Then within uboot you could load the firmware from tftp or upload it with xmodem.

Could you please send me the firmware? I would be very interested in it . (Or just upload it somewhere like filesonic)

Thanks.

Thanx for your answer.

About the firmware, sorry, I can not send it to you and there are two reasons for that:

I don't have the firmware yet. When I get it, I'm not allowed to distribute it. You can find kernel source code of similar device (A.C.Ryan android based box) on their web page. Their device is also based on Hi3716c.

Hi,

Yes, I am using a acryan box clone and wanted to check out the features of the Coolech firmware on my box. That was the reason I asked about it. But okay, if you can't share it, its fine.