Originally Posted by jazzboyrules

Thanks, I have changed that parameter to 35
I guess that the next step is to post the dmesg and logcat soon after I wakeup tomm morning.

---------- Post added at 11:10 AM ---------- Previous post was at 11:06 AM ----------



But I had data on while being on microcell when I had version 2/15-C of the kernel.. and that night, the battery drain was just 7% in 9 hrs.

The only difference that made the battery graph look like the one I posted above was changing the kernel from DD 2/15-C to DD 2/26.

As Entropy suggested, I have changed the wakelock debug parameter to 35 (from 3) and learn what's going on there.

You said in your post that both times wifi and mobile data were off.

Sent from my Transformer Prime TF201 using Tapatalk

Originally Posted by shoman94

You said in your post that both times wifi and mobile data were off.

Sent from my Transformer Prime TF201 using Tapatalk

Sorry, corrected the typo.

But I *WAS* on microcell when I had version 2/15-C of the kernel.. and that night, the battery drain was just 7% in 9 hrs.

The only difference that made the battery graph look like the one I posted above was changing the kernel from DD 2/15-C to DD 2/26.

Originally Posted by Red5

Back to the topic at hand.

Have you flashed the different kernels as entropy explained?

I'm gonna test 15c since I haven't yet.



Sent from my Transformer Prime TF201 using Tapatalk

Using 2/26, reduced sampling rate of conservative to 25k, noop, running great, snappy and good battery performance, deep sleeping nicely. Oh, also undervolted by about 75-100. 4.5 hours on, 48 mins screen on and some music, at 86%. Seems good so far.

Edit: no wake-up lag, just the normal second or so.
Sent from my SGH-I777 using XDA App

OK, I went from 2/15-C to 2/18-A, 2/18-B and then back to 2/26. 2/18-A and 2/18-B runs just fine on my phone. Its when I get to 2/26 is when my phone starts to act like an 80 year old man. Defiantly something in the 2/26 release that does not play well with my phone. Im back on 2/15-C though because it seems to be more snappy.

Again, this may just be a 1 person deal because several others have said they liked it, so at least I know for me that my phone dosent like 2/26. Ill just sit back and wait until the next release comes out and see if anyone else has any issues with 2/26.

Originally Posted by JmPTaz09

Using 2/26, reduced sampling rate of conservative to 25k, noop, running great, snappy and good battery performance, deep sleeping nicely. Oh, also undervolted by about 75-100. 4.5 hours on, 48 mins screen on and some music, at 86%. Seems good so far.

Edit: no wake-up lag, just the normal second or so.
Sent from my SGH-I777 using XDA App

Can you explain what reducing the sampling rate of conservative to 25k does?

Originally Posted by desiromeo719

Can you explain what reducing the sampling rate of conservative to 25k does?

CPU load is checked more frequently, and as a result, the governor ramps up the frequency more often.

With the config in my Sig I'm pulling 10hrs and I'm down to 78% with 1hr screen on. This is also on stock battery. nothing beats Entropy's Kernel and UnNamed.

I dont know how you do it but the 2/26 seems to be working very well for me. Usually at this time of day I am in the low 60% range with your previous kernel, and so far I am at 75% with the 2/26. I am running the ICScrewD 2.0.1 Rom with stock settings with 8 hours from unplugged.