5,815,022 Members 39,471 Now Online
XDA Developers Android and Mobile Development Forum

Cases

Tip us?
 
fatxdad
Old
(Last edited by fatxdad; 25th January 2012 at 03:25 AM.)
#1  
Junior Member - OP
Thanks Meter 1
Posts: 18
Join Date: Jan 2012
Location: Leipzig

 
DONATE TO ME
Cool Cases

There is nearly only 3 types of cases out at the market.

First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.

Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.

The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.

Hope I could help a little bit and will share my upcoming experiences.
The Following User Says Thank You to fatxdad For This Useful Post: [ Click to Expand ]
 
vil33
Old
#2  
Senior Member
Thanks Meter 25
Posts: 130
Join Date: Nov 2011
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
 
fatxdad
Old
#3  
Junior Member - OP
Thanks Meter 1
Posts: 18
Join Date: Jan 2012
Location: Leipzig

 
DONATE TO ME
The leather ones I tried are for pulling out the device before use.

The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.

The first category cases are made for the device and aren't blocking anything.
 
psyang
Old
#4  
Junior Member
Thanks Meter 0
Posts: 2
Join Date: Oct 2009
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
 
Lookin4Trouble
Old
#5  
Lookin4Trouble's Avatar
Senior Member
Thanks Meter 39
Posts: 333
Join Date: Jan 2012
Quote:
Originally Posted by fatxdad View Post
(edited for brevity)
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
 
doode2011
Old
#6  
Senior Member
Thanks Meter 19
Posts: 120
Join Date: Dec 2011
Default Speck Sureslider Case

So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).

Here's my review on it:

It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.

Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?

The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."

If you have any questions, feel free to ask.
The Following User Says Thank You to doode2011 For This Useful Post: [ Click to Expand ]
 
aj45690
Old
#7  
Junior Member
Thanks Meter 0
Posts: 8
Join Date: Apr 2010
Location: Atlanta
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.

Im a cheap bastard so my $5 case works great for me.
 
Lookin4Trouble
Old
#8  
Lookin4Trouble's Avatar
Senior Member
Thanks Meter 39
Posts: 333
Join Date: Jan 2012
Default Amzer cases

Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...

L4T
 
teradark
Old
#9  
teradark's Avatar
Senior Member
Thanks Meter 11
Posts: 116
Join Date: Aug 2008
Location: Staten Island, N.Y.
http://www.daydeal.com/home.php?cat=6439

Haven't tried any of them but their stuff is good.
Samsung Galaxy SII Epic 4G Touch
Rom: Modified Stock 2.3.6 (Deodex)
Kernel: Stock EL29

Archos 80 G9 250GB
Rom: Rooted Stock ICS 4.0.6
Kernel: Stock

Motorola Droid X2
Rom: Stock(Too lazy To check)
Kernal: Stock

Samsung Captivate Glide (Sold)
Rom: Modified Stock 2.3.5 (Deodex)
Kernel: 2.6.36.3 (CarrierIQ Free)

 
clpo13
Old
#10  
clpo13's Avatar
Junior Member
Thanks Meter 5
Posts: 18
Join Date: Jan 2012
Default Body Glove Captivate Glide

I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.

It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.

The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.

As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.

I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.

The Following User Says Thank You to clpo13 For This Useful Post: [ Click to Expand ]
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes