[Q] HD7 Jtag Done . Help me out in Flashing .

---

I have done only resurrection from Riff .. ( not full dump )

Phone power on but vibrates several times

here is boot info ..


Security Unlocked

PD29xxx SS-BC (4K)
SPL-5.11.2250.0(0134400) MNG
MicroP(LED) 0x07
TOUCH S1(1.8,#1624)

i have tried this file

RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE

1% & then error 226

then i try this

RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_b y_ansar.zip

error on 11% then same error 226 ..



how can i flash this phone ???

RUU_Schubert_S_HTC_Europe_5.12.401.01_Radio_5.71.0 9.02a_22.51.50.21_Signed_SCHUBERT_RELEASE.exe


flashing stucks at 7% but spl is changed to 5.12 ..

what should i do ?

no one reply so i write full dump via jtag

phone ok spl is 1.57



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.38
Selected Resurrector: [HTC HD7]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010020000000000000000025

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)

Writting FLASH1 memory from 0x0000000000 to 0x001FFFFFFF
Completed in 00:35:01.235 (Average Transfer Rate: 257.31 kB/s)

Originally Posted by aamszia

no one reply so i write full dump via jtag

phone ok spl is 1.57



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.38
Selected Resurrector: [HTC HD7]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010020000000000000000025

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)

Writting FLASH1 memory from 0x0000000000 to 0x001FFFFFFF
Completed in 00:35:01.235 (Average Transfer Rate: 257.31 kB/s)

hi
i have a problem exactly like your phone and i downloaded a full dump file from riff box support but it didn't write on phone and there were so error when writing full dump.
now i want to please you give me a link for your full dump that you used for your phone or upload it for me
thank you so much
i need it a.s.a.p if you can do it.
thanks