I have done te log:

I/EventHub( 1301): New device: path=/dev/input/event6 name=lightsensor-level id=0x10002 (of 0x3) index=3 fd=56 classes=0x0

I/SystemServer( 1301): Bluetooth Service

I/EventHub( 1301): New keyboard: device->id=0x10003 devname='vision-keypad-esn' propName='hw.keyboards.65539.devname' keylayout='/system/usr/keylayout/vision-keypad-esn.kl'

I/EventHub( 1301): New device: path=/dev/input/event5 name=vision-keypad-esn id=0x10003 (of 0x4) index=4 fd=58 classes=0x3

I/EventHub( 1301): New device: path=/dev/input/event4 name=proximity id=0x10004 (of 0x5) index=5 fd=59 classes=0x0

I/EventHub( 1301): New device: path=/dev/input/event3 name=atmel-touchscreen id=0x10005 (of 0x6) index=6 fd=60 classes=0x14

I/EventHub( 1301): New keyboard: device->id=0x10006 devname='projector-Keypad' propName='hw.keyboards.65542.devname' keylayout='/system/usr/keylayout/qwerty.kl'

I/EventHub( 1301): New device: path=/dev/input/event2 name=projector-Keypad id=0x10006 (of 0x7) index=7 fd=61 classes=0x1

I/EventHub( 1301): New device: path=/dev/input/event1 name=projector_input id=0x10007 (of 0x8) index=8 fd=70 classes=0x4

I/EventHub( 1301): New keyboard: device->id=0x10008 devname='h2w headset' propName='hw.keyboards.65544.devname' keylayout='/system/usr/keylayout/h2w_headset.kl'

I/EventHub( 1301): New device: path=/dev/input/event0 name=h2w headset id=0x10008 (of 0x9) index=9 fd=71 classes=0x1

I/KeyInputQueue( 1301): Device added: id=0x10008, name=h2w headset, classes=1

I/KeyInputQueue( 1301): Device added: id=0x10007, name=projector_input, classes=4

I/KeyInputQueue( 1301):   X: min=0 max=480 flat=0 fuzz=0

I think that lines are enought. qwerty.kl and vision-keypad-esn.kl are the files of interest. Isn't it? Must the h2w_headset.kl must be modified too? Appears to be the calling profile.

Originally Posted by ammm84

I have done te log:

I think that lines are enought. qwerty.kl and vision-keypad-esn.kl are the files of interest. Isn't it? Must the h2w_headset.kl must be modified too? Appears to be the calling profile.

You are totally right, I'd modify that one too, but only if the rest of the key's are also defined in that kl file.
You could always try though.

If it isn't working, the only option I see is flashing another rom and check if it works there. (If you use ClockworkMod Recovery you can easily backup your current rom and put it back, later on)
I wonder what isn't working in this one... but as I said, if it doesn't work in other roms.. then I'm afraid it's just broken... although you can always try to unroot and such, but still.

(Just finished writing my tutorial on how to do it in my previous post, posted it, oh, new post, ahh, that was time wasted... oh well)

Cyanogen 7 installed, and trackpad working fine. It works in recovery too. May be the other rom is corrupt.

Thanks for your help!!

No problem, glad it works now. Have fun with your phone.

Sent from my HTC Vision using XDA

Problem during downgrading

---

Originally Posted by lineaira

No problem, glad it works now. Have fun with your phone.

Sent from my HTC Vision using XDA

Hey all

I receive the below error during downgrading, i'm using a HTV Desire Z gingerbread 2.3.3

i got the pastebin link but i can't past it as am a new user.

pastebin .com / diNTmTGP <<<< remove the spaces

Firstly, chmod is telling you you used it wrong. Notice how it prints out the correct syntax? you forgot a space between the 777 and the /data/local/tmp.
Next, the not found error could be a caused by a whole heap of things, though I'm guessing you didn't push it properly

-Nipqer

Nipqer

Thanks for the reply.

Firstly when i type >adb push fre3vo /data/local/tmp line it says there is no such file, after i remove the space between fre3vo and data it goes as the link below
pastebin .com /xZZEtTDK

and when i remove the space between the 777 and data it goes like this
pastebin .com /GdX3TKAg

PS: when i unistalled the HTC sync, it said that adb application couldn't be unistalled.

Adb can't find fre3vo because you have cmd pointed to C:\Users\lzzzpy, and fre3vo is not in there. Either move fre3vo (and the other rooting files) or change the current working directory in cmd

-Nipqer

Sent from my Nexus 7 using xda premium