FORUMS

Two New Moto X and New Moto G Announced, Details Inside

Today’s Moto event just ended and now we have a clear look at all of … more

How Strong Is Your Connection? – XDA Xposed Tuesday

Everyone is always talking about their bars. How many bars of WiFi do they … more

OnePlus 2 Announced: Specs, Price and Details

The OnePlus 2 has just had its Virtual Reality Launch event, and at the XDA Office we all … more

A Helpful Guide to Music Streaming Services

With the launch of Apple Music, music streaming services have recently gained a lot of … more

[SSPL & USPL] Flash any ROM to your Pharos

45 posts
Thanks Meter: 1
 
By suracha, Member on 9th June 2008, 05:32 PM
Thread Deleted Subscribe to Thread Email Thread
16th January 2012, 01:53 PM |#171  
Junior Member
Thanks Meter: 1
 
More
good work
Quote:
Originally Posted by suracha

Hi guys,

Here is my recommendation for unlocking your Pharos;

  1. Set Button 3 (Camera) to <None>.
  2. After run the JumpSPL.exe and get the file list, press Camera first; then press Power. This is little difficult, if you pressed Power too long; you device may be turn off.
  3. Tab the Pharos_JumpSPL.nb file, it must be tabbed while Camera & Power button are pressed.
After above, you should get grey background screen.
You can flash the HardSPL at this point.

If the flash success, you will get SPL 1.11Mobiz instead of original SPL 1.11.0001. This means the device is already unlocked.

It does work for me and I already flash Tom's WM6.1 ROM.



thanx

tested by me go good
 
 
3rd March 2012, 06:23 PM |#172  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by suracha

This is a SSPL for use with esteve & pof's JumpSPL along with the HardSPL. It enables you to flash any ROM to your Pharos.

If you wanted to permanently unlock your device, the HardSPL was also available.



JumpSPL & HardSPL Instructions:

  1. Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
  2. Use 0x10000000 as Jump Address.
  3. After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).

    You will get the grey background screen, you can flash any ROM to your device at this point.

    In some case, you may need to unplug and then plug the USB cable again.
  4. If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.

    After HardSPL, you will notice your SPL version change when boot;

    From SPL 1.11.0001
    To SPL 1.11Mobiz

Recommended:
  • To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.




Thank you to esteve & pof for the JumpSPL.
Thank you to Mr. Ru Chonburi who create the Pharos_JumpSPL.nb.

I am just the tester and author of this article, all work was done by Mr. Ru Chonburi of PDA Mobiz (http://www.pdamobiz.com).

Enjoy flashing ...

pls explain into details newneas are around.
i followed the instructions but after step 1
i tried pressing camera and power buttom but i dont get grey bacgroung
it only goes to camera.pls help
16th March 2012, 11:27 PM |#173  
Junior Member
Thanks Meter: 0
 
More
Quote:

Originally Posted by dotexe
i succeded


the most important step is 5 !!!!

5. Tap the Pharos_JumpSPL.nb file, it must be tabbed while Camera & Power button are pressed.

After the Pharos_JumpSPL.nb file was tabbed DONT RELEASE THE CAMERA AND POWER BOTTON , KEEP PRESSING 2 SECONDS AFTER THE haros_JumpSPL.nb file was tabbed and then RELEASE .

5.1 Quick double click on ROMUpdateUtility from the HARD SPL directory.


thanks it works!!!
11th April 2012, 07:56 PM |#174  
Zeitgeist4's Avatar
Member
Flag Waiblingen, Stuttgart
Thanks Meter: 8
 
More
Which rom can I install on my pharos? I use the phone as a second unit and it would be nice if I would bring it "back to life"

Thanks in advance for any reply
Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes