QUOTE=illdill;12590019]***Moderators, please delete previous relative threads at your discretion***
***Update*** Img 14 is now available. It is not required for a successful restore, But if you are having trouble without it, why not give it a try if you can wait for 560 megs to download.
Restoring the Streak 7 using NVFlash
(Windows Only Instructions) If you’re a Linux user, you should be able to 'translate' this yourself.
This is for those who cannot use fastboot or adb. If you can successfully use these tools, DO NOT use NVFlash. You will lose all your data on your device. Do not proceed with these instructions if you are not expecting to lose all personal data on the device
Step 1) APX Drivers – To work in NVFlash mode you need to install the drivers for the nvidia boot-recovery device. Power off your device and disconnect it from the computer. Hold down the Volume up & down buttons while plugging in the USB cable. (Or leave the USB cable attached and hold the pinhole ‘power off’, hold down the volume Up & Down and release the pinhole ‘power off’.) (The volume button seems like a rocker switch, but you can hold down both sides at once)
Your computer should now recognize the Streak 7 as an APX device. Manually install it using the nvidia boot-recovery drivers.
Step 2) Install NVFlash. For ease of function simply create a folder on your C:\ drive called ‘nvflash’. Download the nvflash zip and extract it to the nvflash folder.
Step 3) Download the 13 img files that make up the original partitions of the device. Files p2.img through p14.img. Put these files in the C:\nvflash folder.
Step 4) Launch (double-click) the Restore.bat file from the C:\nvflash folder. This batch command will begin copying the partitions to the device. Wait patiently as your device is being restored.
Step 5) Once all of the partitions have been written, use the pinhole ‘power off’ button next to the SD card to power off the device. Now power it back on normally to enjoy your restored Streak 7.
If you have trouble with any of the links or corrupted files, please pm me or reply to this thread.
That's all I can do folks. Ran out of free space on my free storage site.
*** Update *** If you are still stuck at boot logo, check to see if you can get into fastboot mode, if so,
finish restoring with the fastboot method.
************* Also, I recently used this method to restore from Honeycomb. I too was again stuck at the Dell logo. However, I was able to use the recovery menu (Vol Up + Power) and do a factory reset and was fine from there.
Original System Files[/QUOTE]
Hi mate, I've followed your tutorial, I installed the drivers, it is detected as APX, I downloaded the p2 to p14, I have copied to the folder NVFLASH and I have given to Restore.bat and when I turn ends Restore.bat DS7 of the button attached to the SD slot and when I turn on only 3 LEDs are lit on the right side of the screen.
The Boot, System, Recovery and Animation I have to put in NVFLASH or only I have to put the img of p2 to p14.
I await your reply mate, I am somewhat novate this.
Thanks in advance