[ROM][4.0.4][MTD] CyanogenMod 9.0.0 | READ : http://goo.gl/rkEeh

Status
Not open for further replies.
Search This thread

reddog69

Senior Member
Dec 16, 2009
100
11
clinton,mo
compile error

any help with this No rule to make target `vendor/samsung/p1/proprietary/lib/libril.so', needed by `out/target/product/p1/obj/lib/libril.so'. Stop.
i appreciate any help
 

sbradymobile

Senior Member
Mar 1, 2011
361
619
is it possible to set 1x1 widget on the dock ?

Not sure if you figured it out, but yes just drag it there.

After fiddling around with the launcher settings, can't seem to enable search bar at all. Anyone else having the same problem or am I missing something.

The search bar setting was under homescreen, moved it to tablet section with apk below.

A few things added and cleaned up in the tablet settings, let me know if I missed anything and if anybody wants to translate the settings let me know and I will put them up in github.
 

Attachments

  • Screenshot_2012-03-22-22-11-28.jpg
    Screenshot_2012-03-22-22-11-28.jpg
    207.4 KB · Views: 582
  • Trebuchet.apk
    7.6 MB · Views: 66
Last edited:

brunoisa10

Senior Member
Oct 17, 2007
1,400
371
Westende
Not sure if you figured it out, but yes just drag it there.



The search bar setting was under homescreen, moved it to tablet section with apk below.

A few things added and cleaned up in the tablet settings, let me know if I missed anything and if anybody wants to translate the settings let me know and I will put them up in github.

impossible to drag a 1x1 widget in the dock

I've experimented the issue of having many times the same appli in the same place on the dock and force close when removing all (seems 4-5 copies)
this issue was with Nova or Apex , I don't rememeber
Rechecked with your last version: seems OK
I'll send you french translation for the settings :)
 

dahiLLL

Senior Member
Dec 2, 2011
69
11
Thanks for the feedback. I noticed the lag as well, it appears to be a bit too much for our graphics chip. I am attaching a version that hides the hotseat when the page is moving, it seems to eliminate the scrolling lag. I will probably work on a bottom hotseat in the future because I would also prefer the look, but it will take a bit longer because it requires more extensive changes to the layout.

Edit: It looks like there is an error with landscape hotseats not being touchable, new version in post at bottom of page.

Thank you for the new version! I have tried it and now is very smoother than the previous :)
I hope in the future you can correct the error for move the dock on the bottom!
In this version I have seen that are two docks, one on the left side and one on the right... I would decide if I want only the dock on left or right side of the screen or even. Can you add an option for do this choice? I think this change should improve the performance if I can choose only one dock ;-)
BTW when I have a free time I will try to translate the settings in Italian :)

... Tapatalked via GalaxyTab7@Slim's Kang CM9
 

Ulderico

Member
Dec 23, 2010
9
0
DISPLAY COLOR SETTINGS
Hi all,
is there any way to modify diplay color settings such as color saturation, color temperatures, depth of black, etc..?
Thanks for support.
 

gurudev32

Senior Member
May 2, 2011
139
179
Bengaluru
HumberOS: when?

Hey Humberto, when can we expect new Kernel build ?

Remember that u quoted in last pages to get one soon!

My system was broken, got fixed. Setting up build Env now. Also learning how to build and all stuff.

I watch a lot of HD movies. But in last 07/03 kernel Full h/w acceleration is broken for FullHD rendering. But still 'm running on same kernel 'coz of other improvements. So just a request as when can new kernel be expected with H/W accel fix and Wi-Fix?

P.S.: Full h/w accel use to work with kernel builds dated 01/03 and prior.
 

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
Hey Humberto, when can we expect new Kernel build ?

Remember that u quoted in last pages to get one soon!

My system was broken, got fixed. Setting up build Env now. Also learning how to build and all stuff.

I watch a lot of HD movies. But in last 07/03 kernel Full h/w acceleration is broken for FullHD rendering. But still 'm running on same kernel 'coz of other improvements. So just a request as when can new kernel be expected with H/W accel fix and Wi-Fix?

P.S.: Full h/w accel use to work with kernel builds dated 01/03 and prior.


Hey!

Sorry for delay!

I am testing new wifi driver.
It is working fast and fine.
About H/W accel, I can watch some moovies using Netflix. But, still have a famous green glitch.
Please, give more some time and I will release it soon.
I think 1 or 2 days.

Greetings from Brazil
 

brunoisa10

Senior Member
Oct 17, 2007
1,400
371
Westende
Not sure if you figured it out, but yes just drag it there.



The search bar setting was under homescreen, moved it to tablet section with apk below.

A few things added and cleaned up in the tablet settings, let me know if I missed anything and if anybody wants to translate the settings let me know and I will put them up in github.

here is the french translation





forgotten the ALL APPS BAR first , just under Tablette : it is "Barre d'Applications"

and just at the end : Indicateur de Page without the s at the end


If somebody has a better translation , please feel free to indicate
 
Last edited:
  • Like
Reactions: sbradymobile

gurudev32

Senior Member
May 2, 2011
139
179
Bengaluru
Hey!

Sorry for delay!

I am testing new wifi driver.
It is working fast and fine.
About H/W accel, I can watch some moovies using Netflix. But, still have a famous green glitch.
Please, give more some time and I will release it soon.
I think 1 or 2 days.

Greetings from Brazil

U need not be sorry Humberto !

I owe u and other dev's 4 all good work .

Will wait. Thnx in advance :)

Sent from my GT-P1000 using xda premium
 
  • Like
Reactions: humberos

andnej

Senior Member
Jul 29, 2011
153
12
Jakarta
Hey!

Sorry for delay!

I am testing new wifi driver.
It is working fast and fine.
About H/W accel, I can watch some moovies using Netflix. But, still have a famous green glitch.
Please, give more some time and I will release it soon.
I think 1 or 2 days.

Greetings from Brazil

You don't owe us anything, we're the one that owe you much. I can taste ics without buying anymore handset. We will wait as long as it takes.
thanks to all developers, greetings from Indonesia!

Sent from my GT-P1000 using XDA
 
  • Like
Reactions: humberos

gurudev32

Senior Member
May 2, 2011
139
179
Bengaluru
Dev's here, I have a suggestion + request

Can it b implemented in settings to select a option for snapshot to save or to open with a program (like skitch or other editing program )

That'd b of gr8 help. It'd add feature like Note, where screen capture with stylus opens up in sketch tool !!

Sent from my GT-P1000 using xda premium
 
Last edited:

Jockard

Senior Member
Apr 8, 2011
211
28
Thank you!

Just wanted to say thank you for everyone trying to help and thank you for all of the developers who are working on this project...

Great job mates! Im just loving ICS!!!! :cool:
 

ableeker

Senior Member
Nov 20, 2010
239
34
Thanks jt1134, that started to compile nicely. However, after quite some time it aborted as well, this time with the following message.

Code:
external/mesa3d/src/glsl/linker.cpp:1734:59: error: ‘offsetof’ was not declared in this scope
make: *** [out/host/linux-x86/obj/STATIC_LIBRARIES/libMesa_intermediates/src/glsl/linker.o] Error 1

Does anybody know how to fix this?
 

ableeker

Senior Member
Nov 20, 2010
239
34
I found on the Internet that it's a missing include. You have to insert the following at the top of linker.cpp.

Code:
#include <stddef.h>

It compiles succesfully after this modification. Ye gotta luv the Internet!

However, does it create a ROM? The last message it that it has created file out/target/product/p1/userdata.img, which is 23.2 MB. It also has created in that folder boot.img (4.5 MB), ramdisk.img (162.5 KB), ramdisk-recovery.img (1.5 MB), recovery.img (4.5 MB), and system.img (192.8 MB). How do I combine all these file into one ROM?
 

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
News

I've fixed green glitch on videos playing and now I'm watching 1080p clips without it.

Code:
03-25 14:19:14.413: I/AwesomePlayer(115): setDataSource_l('/sdcard/Rio HD 1080p [Official Trailer].mp4')
03-25 14:19:14.546: I/OMXCodec(115): [OMX.SEC.AVC.Decoder] AVC profile = 100 (High), level = 40
03-25 14:19:14.550: I/OMXCodec(115): [OMX.SEC.AVC.Decoder] video dimensions are 1920 x 816
03-25 14:19:14.667: I/ActivityManager(206): Displayed com.bsplayer.bspandroid.free/com.bsplayer.bsplayeran.pbcore: +580ms

So, give me more a couple hours and I will release a new kernel version.

Greetings from Brazil!
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 190
    Read this, IMPORTANT: http://goo.gl/rkEeh

    Code:
    ** These CyanogenMod builds are highly experimental and unsupported.
    **
    ** If one of this builds bricks your phone, kills your cat or causes
    ** a thermonuclear war, don't point at us. We'll laugh at you.
    ** You decided to make this modifications to your Tablet.
    **
    ** Please refrain from submitting bug reports for any issues
    ** you may encounter while running one of these builds.
    **
    ** Submitting bug reports on experimental builds is the leading 
    ** cause of male impotence.


    This is a stable Build of the current state of CyanogenMod 9 for the Samsung Galaxy Tab.
    CM9 is based on latest AOSP sources plus some useful tweaks and features.

    Known issues, Downloads and Screenshots: Post #2
    General Discussion thread : SGT7 General
    Developer only post : Post #3 (how to build and more)
    What is MTD (for epic, but its the same for all Samsung devices - except the ROM links ofcourse) http://xdaforums.com/showthread.php?t=1387334

    Please refrain from submitting bug reports for any build not released by us - report em to whom u got the build from

    We'll release new builds when we feel like doing so, although we do keep our sources updated all the time!

    The people behind this :

    angel_666
    cdesai
    humberos
    jt1134
    koxudaxi
    red_rebel
    sbradymobile
    eaut
    Techomancer

    Big thanks to Teamhacksung for all their work on the aries, and for all the help

    And Ofcourse - the CyanogenMod Team!
    88
    Known Issues + Useful info :
    USB Tethering won't work in windows (works in ubuntu, untested on OSX)
    Internal sd is /mnt/sdcard, and external is /mnt/emmc
    USB Host works with a Y cable as the tab doesn't supply power, doesn't with the standard Samsung Adapter for the new tabs.

    Official Nightlies : http://get.cm/
    p1 : http://get.cm/?device=p1 [GSM Tabs]
    p1c : http://get.cm/?device=p1c [CDMA Tabs]
    Modems :
    p1 [GSM] : http://goo.gl/EjHq5 (Flash via CWM)
    p1c [CDMA] : http://goo.gl/Dhmjl (Flash via Odin)

    READ THIS BEFORE FLASHING
    ^It's for the epic but it's pretty much the same thing except the ROM links, and the only ROMs having MTD now are CM9 based ROMs - no MTD on GB

    Only way to revert to a normal ROM now is flashing a stock Samsung ROM by odin (with repartition checked)


    How to Flash the above zips :

    You need to restock your tab if you are running an old MTD build, (only if /system isn't 406 mb, check it by the command `df system` or use an app (such as root explorer) )
    IF you are coming from a FSR (STL/BML) ROM (aka Samsung ROM - anything else than the latest CM9 builds / AOKP builds, i.e. any GB ROM, no need to restock)
    IF you are coming from a froyo ROM, you need to flash a stock GB ROM first, follow the guide below :

    Restocking :
    Follow the team overcome restock guide [http://www.teamovercome.net/p1000/?page_id=17], and completely restock your tab.
    Once you've flashed it, reboot into download mode again and flash any kernel with recovery (any non-MTD kernels from humberos.com.br, or this forum, for your tab model)
    After you've flashed the kernel, reboot into recovery, and this time, install the zip you just downloaded from CyanogenMod servers.
    Install Google Apps if you want (gapps-ics-* from goo.im) [optional]
    Reboot and enjoy your tab :)

    Normal install :
    You need to have a kernel with CWM Recovery
    Get the zip from the above download links
    Put the zip on your sdcard, reboot into recovery, and install the zip
    It'll reboot a few times during the install, that's normal :)


    attachment.php
    attachment.php
    attachment.php
    44

    Sources :

    CyanogenMod : https://github.com/CyanogenMod
    SGT7 (based off CyanogenMod sources with a few tweaks of our own) https://github.com/sgt7

    All device tress (p1, p1c and p1-common) and kernel tress (p1 and p1c) have been merged into the CyanogenMod tree now, if you want to submit a change/patch, use cm code-review [http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit]

    How to get the sources :
    Setup Android Build Environment (http://source.android.com)
    Code:
    mkdir ~/cm9
    cd ~/cm9
    repo init -u git://github.com/CyanogenMod/android.git -b ics
    (Type in your name and email address when asked)
    Code:
    repo sync
    (^^This'll take a while, as ~7GB of sources are downloaded initially)

    How to build :
    Code:
    source build/envsetup.sh
    cd device/samsung/p1 ; ./extract-files.sh
    brunch p1
    Replace p1 with p1c for CDMA variants.
    Building may take a long time depending on your machine, might range from a few minutes to many hours
    After the build is done, navigate to ~/cm9/out/target/product/p1
    The zip you'll be looking for would be update-cm-9.0.0-RC0-p1-UNOFFICIAL-signed.zip

    If you want to build just the kernel, type the below commands
    Code:
    source build/envsetup.sh
    make out/target/product/p1/boot.img

    If you want just the kernel - u'll get it in the same folder, boot.img
    Flash it with heimdall
    heimdall flash --kernel ~/cm9/out/target/product/galaxytab/boot.img --recovery ~/cm9/out/target/product/galaxytab/boot.img

    ^^The above instructions were for building a clean CyanogenMod build for p1, without any changes we did to the sources (mainly frameworks and some apps)

    IF you want to build that, sync from https://github.com/sgt7/android.git instead of CyanogenMod, and then build using the same commands
    38
    I got some news!

    https://plus.google.com/115013390614274076135/posts/CcmArQkDDXn

    Official builds coming soon!


    But, till then, i suggest the kangers not to sync, as i'll be changing stuff upstream which might break the build(mainly vendor/samsung, device is now p1 and p1c)

    So, dont repo sync until i give a heads up(or remove vendor/samsung from your manifest)

    And, don't try to build p1 atm (uploading it in a while) - Can build the good old galaxytab fine, just don't try to build p1 or you'll be on your own (you'll know why soon)
    37
    CM9 - Updates

    Hi fellows!

    Just check it!

    http://www.humberos.com.br/p/android-ics.html

    ps. Today is my brother birthday!
    This is for him!



    Greetings from Brazil!

    Enjoy!