Flashing tutorial for dummies [ICS SGS TEAM ROM]

Search This thread

Perka

Senior Member
Sep 15, 2010
3,642
3,122
If you are looking for modems I have some and they are on a private server so they wont get deleted.

perka.zapto.org

feel free to add link in OP.

Also look for free app in play Perka stash app to search the files.

Peace
 

covivek

Member
Mar 23, 2012
5
0
Singara Chennai
Great help..:)

Thanks a lot for the tutorial. It was really an awesome experience...faced the recovery in blue writing, phone not turning ON issue and then phone boot looping...nd finally got the flashing rite...Thanks a loooottt...:):)
 

blkr00t

Senior Member
Apr 17, 2008
91
0
Will this tutorial work for this version?

The phone that I need to root and flash is TMobile Prepaid 4G with baseband model number SGH-T959V and baseband version T959VUVKJ6.

I know how to flash ROMs with Odin but I really don't want to brick my sons phone. What version CF should I download to flash root this phone and flash an ICS or CM9 ROM?
 

jimcantfixit

Senior Member
Nov 10, 2011
393
96
Will this tutorial work for this version?

The phone that I need to root and flash is TMobile Prepaid 4G with baseband model number SGH-T959V and baseband version T959VUVKJ6.

I know how to flash ROMs with Odin but I really don't want to brick my sons phone. What version CF should I download to flash root this phone and flash an ICS or CM9 ROM?

Well icssgs 4.2 is stable an AOSP so I would go for that ROM over CM9. Can't help you on the model etc but try searching Google for help with that.

Trolled from my GT-I9000 using XDA
 

charmthief88

Senior Member
Jan 20, 2012
76
7
If you are looking for modems I have some and they are on a private server so they wont get deleted.

perka.zapto.org

feel free to add link in OP.

Also look for free app in play Perka stash app to search the files.

Peace

Thanks perka as always, I might not need your modems files at the moment, but many speak highly of you. I also appreciate people who go through the effort you do.


BTW this thread needs to be stickied it is soooo valuable to newbies.

---------- Post added at 01:24 AM ---------- Previous post was at 12:25 AM ----------

Will this tutorial work for this version?

The phone that I need to root and flash is TMobile Prepaid 4G with baseband model number SGH-T959V and baseband version T959VUVKJ6.

I know how to flash ROMs with Odin but I really don't want to brick my sons phone. What version CF should I download to flash root this phone and flash an ICS or CM9 ROM?


I was not fortunate enough to have this tutorial, but website like theandroidsoul.com was able to help me, providing all the stuff from XDA and Sammobile you needed. Help me flash to RC3 back then. Here you go it will have CF-Root tar you require in step two.

http://www.theandroidsoul.com/android-4-0-update-for-galaxy-s-i9000-custom-rom/

However if you want to go the path of the new of the JW4 valuepack here's what I did.

http://xdaforums.com/showthread.php?t=1102881

Plus you need the CF root, Which can be aquired here. Or do a search, and you can find SP root for JW4.

http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/

Either way you should be clearly on your way from GB to ICS.
 

netvpn7

Senior Member
Aug 19, 2010
340
17
SGS 2 GB Wont Boot or Turn ON while ODIN failed...

Hi
while i was on Part 3 and the ODIN was on Partitioning step and unfortunately the USB cable was mistakenly removed and ODIN came up failed. Now phone wont start power on???

Please guide how to Turn this on? I have tried all possible way of reset power on with 3 buttons etc etc however nothing worked?

no sign of charging when plugged in after this aftermath?

Any help will be much appreciated.

Thank you
 

jimcantfixit

Senior Member
Nov 10, 2011
393
96
Hi
while i was on Part 3 and the ODIN was on Partitioning step and unfortunately the USB cable was mistakenly removed and ODIN came up failed. Now phone wont start power on???

Please guide how to Turn this on? I have tried all possible way of reset power on with 3 buttons etc etc however nothing worked?

no sign of charging when plugged in after this aftermath?

Any help will be much appreciated.

Thank you

Can you still access download mode? If so just try flash again

This happened to me and I was able to resurrect my phone.

Trolled from my GT-I9000 using XDA
 

Snyphr

Member
Mar 9, 2012
12
3
London
works a treat for me :D

awesome tutorial!

i had a few hiccups along the way, but managed to bake ics onto my galaxy S. was about to throw it in the bin. now its like i have a new phone :D
 

metalchef

Senior Member
Jan 22, 2009
249
50
Fredericton
www.metalchef.com
I know this is for the REAL i9000 ...I've got an SGH-T959D running Darky ROM 10.4.2, so the device *thinks* it's an i9000 even though it's not.

I tried flashing ICSSGS but it got stuck at boot loop; so I tried the Semaphore kernel -- to no avail: boot loop remained.

and, of course, the stock 2.3.6 files won't flash. so...is there no hope for me to flash ICSSGS to my SGH-T959D? I know it's been done... :(

</sad panda>

EDIT: removed .md5 ext from all tar files in Stock 2.3.6 pkg, and was able to successfully flash ROM...will amend post if further updates/flashing are successful.

EDIT #2: boot loop persists; don't get a chance to flash semaphore kernel from CWM after flashing ICSSGS before phone reboots into boot loop. Anyone with an SGH-T959D had any success here?
 
Last edited:

metalchef

Senior Member
Jan 22, 2009
249
50
Fredericton
www.metalchef.com
Hi
No I cannot go to download mode. Screen won't turn on.?

Sent from my HTC HD2 using XDA

If you have a jig, give it a shot... sometimes a soft-brick doesn't show anything on the device's display, but it will still go into download mode (if you don't have a jig, you can try pulling & re-inserting the battery, then hold vol up & vol down while inserting the USB cable).
...however, it's possible you have a hard-brick on your hands (has happened to me with two phones and one tablet, but all were serviced by Samsung).
 

zoolander87

Member
Aug 2, 2008
7
0
wow this was actually VERY usefull. Very complete & very understandable! Tnx man. Appreciate the time u took to make this! :)
 

AwfooL

Member
Apr 11, 2012
40
11
flashed glitch kernel, then rom, wiped dalvik cache/cache partition, then semaphore kernel...device constantly reboots into CWM.
I don't get it. I've followed this how-to to the T.

That's weird, never got a CWM loop, did you try full data wipe or restoring from a nandroid?
Anyway there's just one thing not clear to me, you "flashed glitch, then rom", so you're telling you flashed kernel before flashing the rom?
Dunno how much this could be helpful, but did you try lippol's cleaning script before flashin' semaphore?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 130
    FLASHING TUTORIAL FOR DUMMIES​
    <ICS SGS TEAM ROM>
    NOTE : NOT ALL THESE STEPS ARE A MUST OR NEEDED TO BE DONE IN THIS PARTICULAR WAY, BUT IT IS BEST TO DO SO IN ORDER TO AVOID FURTHER PROBLEMS AND MAKE SURE THE FLASHING PROCESS IS AS CLEAN AS POSSIBLE.

    >EVERYTHING WILL BE WIPED<

    PAY ATTENTION AND TAKE YOUR TIME !

    I DO NOT ANSWER TO QUESTIONS WHICH HAVE ALREADY BEEN ANSWERED IN THIS TUTORIAL OR IN THE LINKS THIS TUTORIAL PROVIDES !

    THIS IS WHAT YOU HAVE TO DO STEP BY STEP :

    It doesn`t matter on what rom you are, first you need to download a stock gingerbread rom, a kernel which has root and clockworkmod recovery and of course a flashing program (in this case Odin, simply because it does the job), also Samsung USB Drivers :

    NOTE : It would be best to have your phone fully charged before flashing

    1. First install the drivers ONLY if you haven`t already installed them, also if you have Kies installed there is no need to install these drivers, but you are better off installing these anyway : http://dev-host.org/ZRA
    2. Download this package (it includes i9000 stock rom+kernel+odin) : http://dev-host.org/RAE, if you have a Captivate or a Vibrant just download a stock rom for your phone model and find a kernel which has root and cwm in it.

    NOTE : The next step will require using the 3 key combo for accessing the clockworkmod recovery and also the download mode.The 3 key combo used below is for the Samsung Galaxy S GT-i9000. If you own a Captivate or a Vibrant please click this link and choose your phone model to see what 3 key combo must be used, as it differs from one phone model to another : http://tinyurl.com/6q6ajpx

    3. After you have extracted all the contents you downloaded and installed drivers, put your phone into download mode using the 3 key combo : volume DOWN + home button+power button, keep those pressed until it goes into download mode.

    4. Connect phone to PC via USB Cable and open Odin (windows should detect the phone and install some drivers, after it`s finished you should see the message "Added!" in Odin which means Odin succesfully detected your phone so now you are ready to flash)>check Re-Partition Option>press PIT button and browse for the s1_odin_20100512.pit file, press BOOTLOADER button and browse for the APBOOT… file, press PDA button and browse for the CODE….file, press PHONE button and browse for the MODEM….file, press CSC button and browse for the GT-I9000-CSC….file. PRESS START button and wait for the green pass notification in Odin.

    • When the phone reboots into the rom, wait for the setup wizard to appear and then just use the 3 key combo into the download mode again.
    Close Odin and open it again> press PDA button and browse for CF-Root…file> Press START button and wait for the green pass notification in Odin.

    • When the phone reboots into the rom set your phone to mass storage mode from settings>wireless & network>usb settings, copy the ICS SGS rom needed for your phone model, to your INTERNAL SD root location (G: for example, copy the rom here) via USB Cable from here : http://tinyurl.com/7f4m8bp.

    • Now we have to go to clockworkmod recovery using the 3 key combo : volume UP + home button + power button, keep those pressed until it goes into the clockworkmod recovery.

    • Using the volume buttons to navigate up and down select Wipe Data/Factory Reset by pressing the home button, a submenu will appear, hit YES. Wait for it to finish and then Wipe Cache the same way you did with Wipe Data/Factory Reset> Go to advanced menu>a submenu will appear and Wipe Dalvik Cache.Go back to main menu.

    Now it`s time to flash the ICS SGS ROM :

    Select install zip from sd card > choose zip from sd card> browse for the rom zip>choose YES and let it do the magic. If it happens to reboot immediately into clockworkmod recovery with a different look (blue writing), it means it actually flashed just the ICS Kernel first therefore you have to flash again so the ICS ROM gets installed too, just follow the steps above.

    NOTE : Sometimes it works from the first try and sometimes it reboots into clockworkmod recovery instead of flashing the rom because it changes KERNEL first, prior to flashing the rom.

    If it boot loops or you are experiencing other issues read here : http://tinyurl.com/78ajjhc

    Now all you need to do is wait for it to finish.After the flashing is done> Wipe Data/Factory Reset, Wipe Cache and Dalvik Cache as you already know how to do it and choose Reboot System Now. Give it some time to boot, it usually takes at most 5 minutes to boot. If it doesn`t boot, just reflash the rom as described in the steps above.

    NOTE (i9000 users) : At this point if it still doesn`t boot past the Galaxy S Logo after you`ve reflashed the rom, flash Semaphore ICS Kernel via CWM and then just Wipe Cache/Dalvik Cache and Reboot to System.Can`t acces CWM anymore? You have to start all over again from step 4.Only this time flash Semaphore ICS Kernel right after the ICS Rom finishes flashing, Wipe Data/Factory Reset, Wipe Cache/Dalvik Cache and Reboot to System.

    NOTE (Captivate/Vibrant users) : The same applies to you if you encounter the upper issues, only instead of Semaphore Kernel, use Nushor`s kernel.

    Semaphore ICS Kernel : http://goo.gl/qWlOJ

    Nushor`s Kernel : http://db.tt/CMC5BJ0f

    If you don`t have network signal it usually means it`s a modem related problem so just copy to your internal sd card one of these modem zips : http://dev-host.org/SSR and flash it the same way you flashed the ICS SGS rom via clockworkmod recovery (without the Wipe Data/Factory Reset which is needed only when flashing ROMs). It should solve the problem.

    NOTE : Also if you are experiencing heavy battery drain with or without 3G ON (internet included),
    you should try a different modem from here :
    http://tinyurl.com/68reom6.
    Just flash one using the clockworkmod recovery.

    Also you can find some modems here : http://goo.gl/R9q5l

    Depending on the region you are in, modems can make a huge difference!

    But usually 3G/Internet usage will discharge battery faster then Wi-Fi usage.


    THERE IS NO "BEST MODEM" > you have to experiment yourself with these modems!

    If it still doesn`t solve the problem search for possible fixes in the ICS SGS Thread : http://tinyurl.com/7kb46ox.

    If you haven`t found any fix after you have SEARCHED THOROUGHLY or if you have any other issues come here : http://webchat.freenode.net/ ,

    Channel : ##icssgs.

    People there will help you figure it out.

    IMPORTANT : Yes, 4.2 ROM is a bit laggy because of the kernel and the launcher, so all you need to do is to flash Semaphore ICS Kernel (the i9000 users), flash Nushor`s Kernel (the Captivate and Vibrant users) and install Nova Launcher from Market and it`s all good in the hood :D

    Semaphore ICS Kernel : http://goo.gl/qWlOJ

    Nushor`s Kernel : http://db.tt/CMC5BJ0f

    NOTE (i9000 users) : After you`ve flashed the kernel, you will notice the Semaphore App in the App Drawer, open it and set it like this : Governor > smartassv2 | Scheduler : noop. Reboot and you`re done!

    NOTE (Captivate/Vibrant users) : After you`ve flashed Nushor`s Kernel, install NSTools from Market, open it and set it like this : Governor > smartassv2 | Scheduler : fiops.Reboot and you`re done!

    IMPORTANT : You may experience severe battery drain every time you will reboot your phone. 100% of the CPU will be used constantly even if you hardly use the phone and thus the battery will be quickly discharged.To solve this, just open NSTools and change the governor to something else and then change it back.The CPU will come back to its normal state. It seems it is a NSTools issue, though i`m not sure this is a general problem.

    IMPORTANT (Semaphore Kernel users) : If you want to use tethering, make sure you enable "netfilter" in the Semaphore App!

    NOTE : If you find something doesn`t work for you after you`ve flashed the rom, basic things such as camera for example, it means you have to flash the rom again!

    Auto Brightness doesn`t work yet, in the meanwhile use the app Custom Auto Brightness from here : http://tinyurl.com/7fsreu3.
    Or you can buy this brilliant app :
    http://goo.gl/g0y9i

    If you find your screen has a blue, red or yellow tint over it, install Voodoo Sound : http://goo.gl/DXzw8 and tap the button "reset to 2.3.3 defaults".It should fix the issue.

    NOTE (Semaphore Kernel users) : Fortunately auto brightness works well with this kernel, thank stratosk for the auto brightness driver!

    "Just because you`re running the latest OS, does not mean your phone magically doubles in RAM and gains an extra core, IT WILL LAG SOMETIMES, no software can fix that." (PaulForde said it :cool:)

    Please show your appreciation by donating a beer to the devs or supporting them in any way you can.

    Donation Page : http://tinyurl.com/6nve3uh

    Thanks and Credits : http://tinyurl.com/bqsr7z3

    I took the time to write this tutorial because it`s the least I can do to give something back to the community.

    If you followed every step in this tutorial it is highly unlikely to fail this, only if you can`t read English properly.

    If you found this tutorial helpful just press “Thanks” .

    Good Luck ! :D
    2
    when i was a noob to all this, i found that too many guides assumed you had already been used to flashing, so its a little late in the game for me, but this is a fine guide, wonderful work!!
    2
    If you are looking for modems I have some and they are on a private server so they wont get deleted.

    perka.zapto.org

    feel free to add link in OP.

    Also look for free app in play Perka stash app to search the files.

    Peace
    2
    SuperRoo it is not needed to remove the sim card and neither the external_sd, it would have been mentioned in the tut. As for the backups it`s impossible to backup everything from settings to apps etc...and restore them into ICS in such a way that everything would work. Restoring stuff from GB to ICS brings incompatibilities unfortunately so it is best to redo all those settings you had on the GB Rom rather than restoring them from a backup.
    1
    Thanks mate, very helpful. Helped when SuperOneClick didn't work!