Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,732,550 Members 51,638 Now Online
XDA Developers Android and Mobile Development Forum

Rom problem after resurrection

Tip us?
 
arrrghhh
Old
#11  
Retired Forum Moderator / Recognized Developer
Thanks Meter 3371
Posts: 11,036
Join Date: Feb 2007

 
DONATE TO ME
Quote:
Originally Posted by plasco View Post
thank you for yours answers, but i don't have yet a solution for my phone. please tell me if my phone can well, if yes what i have to do? where can i find the original spl for my htc tps cdma (verizon)?
please help me
So you tried the task29 and reflash of stock? There's not a whole lot of other options other than rinse & repeat.
 
plasco
Old
#12  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
I've tried task 28, task 29 and task 32 many times but always the same thing. Asyou said i'll try again and i hope it will resolve my problem.
thank you for your answer.
 
mr.horndoctor
Old
#13  
mr.horndoctor's Avatar
Senior Member
Thanks Meter 9
Posts: 208
Join Date: Feb 2010
Location: St. Louis, MO.
Quote:
Originally Posted by plasco View Post
I've tried task 28, task 29 and task 32 many times but always the same thing. Asyou said i'll try again and i hope it will resolve my problem.
thank you for your answer.
I think the only way you may be able to fix this particular device is to use JTAG and then flash the shipped rom but I have only heard of others doing this and I have no personal experience doing this.
You'll have to decide for yourself if it's worth doing.
Trombone players do it in seven positions!
 
plasco
Old
#14  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
hi men, i have always my problem. today i've tried to reflash spl relocker and after hardspl, i had an error: flash write. please what can i do.
help me please.
 
plasco
Old
#15  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
Default help

i have not yet find a solution for my phone. this is what i obtain when i make some mtty commands. please tell me what is wrong and what am i to do?
 
plasco
Old
#16  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
Default help

i have not yet find a solution for my phone. this is what i obtain when i make some mtty commands. please tell me what is wrong and what am i to do?


Cmd>info 2
Card inserted

SD clk rate 19MHz

Cmd5 CMD_TIMEOUT
SD clk rate 144KHZ

SD 2.0 TURBO mode : SD Clk rate 24 MHz

SD Init OK

Card inserted

SD clk rate 19MHz

Cmd5 CMD_TIMEOUT
SD clk rate 144KHZ

SD 2.0 TURBO mode : SD Clk rate 24 MHz

SD Init OK

HTCSSuperCIDHTCE
Cmd>info 3
HTCSRHOD40000
Cmd>info 4
HTCSSuperCIDHTCE
Cmd>info 5

Cmd>info 6
HTCST HTCE
Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Rhodium_W, Bootloader Version : BOX RESURRECTED!
Built at: Jul 16 2009 21:25:07
Copyright (c) 1998-2006 High Tech Computer Corporation

Board ID=0x4
CPU ID=0x4117B362
TURBO HW =1
TURBO SW =1

Cmd>info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_kby00n00hm
DEVICE ID=0xBC
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x1000
BLOCK PAGE=0x40

Checking block information

BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 4 (0x4) is reversed block
BLOCK 5 (0x5) is reversed block
BLOCK 7 (0x7) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 9 (0x9) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 15 (0xF) is reversed block
BLOCK 16 (0x10) is reversed block
BLOCK 17 (0x11) is reversed block
BLOCK 18 (0x12) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 20 (0x14) is reversed block
BLOCK 21 (0x15) is reversed block
BLOCK 22 (0x16) is reversed block
BLOCK 23 (0x17) is reversed block
BLOCK 24 (0x18) is reversed block
BLOCK 25 (0x19) is reversed block
BLOCK 26 (0x1A) is reversed block
BLOCK 27 (0x1B) is reversed block
BLOCK 28 (0x1C) is reversed block
BLOCK 29 (0x1D) is reversed block
BLOCK 30 (0x1E) is reversed block
BLOCK 31 (0x1F) is reversed block
BLOCK 32 (0x20) is reversed block
OS NOT FOUND !!!


Cmd>info 9
NO user storage


Cmd>task 28
Format start
Fill RSVD information for block 351 to 384
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
Format end

Cmd>task 29
Format BINFS start
CE start start block=384, total block=3712
Write 0xFF start page=0x6000, total page=0x3A000
Format BINFS end

Cmd>task 32
Card inserted

SD clk rate 19MHz

Cmd5 CMD_TIMEOUT
SD clk rate 144KHZ

SD 2.0 TURBO mode : SD Clk rate 24 MHz

SD Init OK

Card inserted

SD clk rate 19MHz

Cmd5 CMD_TIMEOUT
SD clk rate 144KHZ

SD 2.0 TURBO mode : SD Clk rate 24 MHz

SD Init OK

Level = 0

Cmd>getdevinfo
GetDevInfo: Get CID OK

HTCSRHOD4000HTCE
Cmd>task 2a

Cmd>set 14 0
HTCST HTCE
Cmd>emapiINIT
Command error !!!

Cmd>ruurun
Command error !!!

Cmd>checksum

Cmd>
 
arrrghhh
Old
#17  
Retired Forum Moderator / Recognized Developer
Thanks Meter 3371
Posts: 11,036
Join Date: Feb 2007

 
DONATE TO ME
Code:
Bootloader Version : BOX RESURRECTED!
This is really the disturbing part. You don't have a bootloader?!? You said flashing stock failed, there's not a whole lot else you can try. I see you've tried all the mtty commands you could find, which other than task29 I'm not sure what would do you any good.

The fact that the bootloader is hosed is really troublesome. If you can get back to a "normal" bootloader, then you might be OK. That bootloader is causing you these issues, I can pretty much guarantee it.
 
ccengineer
Old
#18  
Member
Thanks Meter 4
Posts: 32
Join Date: Aug 2011
Quote:
Originally Posted by plasco View Post
i have not yet find a solution for my phone. this is what i obtain when i make some mtty commands. please tell me what is wrong and what am i to do?
I read the thread quickly but did not notice that you tried to Hardlsp your phone with teh correct version of HSPL. You mention SPL relocker. Did you try to flash the CDMA HSPL after you resurrected the phone?
 
plasco
Old
#19  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
Default hi

thanks for your answers.
i've tried the three versions of Rhodiumwhardspl but at 100% it tells me ERROR[226] FLASH WRITE and the phone returns on bootloader with ROM CODE update error, please try again.I'm trying it everyday but nothing do.
 
plasco
Old
#20  
Junior Member - OP
Thanks Meter 0
Posts: 22
Join Date: Sep 2011
Default No help

i don t know if there is someone to help me.nobody in the all forums i ve written.ok i will through it because i m very desapointed,nobody can t repair it.

THREAD CLOSED
Subscribe
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


XDA PORTAL POSTS

Run, Jump, and Shoot in Tales of Ciaxia

There are certain types of games that have become paramount of the portable gaming world. As we have … more

Samsung Gear Live Stock Firmware Image Pulled, Temp Root

Just yesterday,XDA Recognized Developer and TV ProducerAdamOutlertore apart … more

Draw a Line and Let Your Device Do the Rest with LineitApp

Over the years, since evenbefore Android entered the scene, we have striven to … more