Introducing XDA:DevCon – A Conference For Developers By Developers
XDA Developers Android and Mobile Development Forum
Forgot your password?
 
Post Reply+
Tip us?
 
markols
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 6
Join Date: Apr 2012
Default Aborted install from CWM

I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.

Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O
 
Solar.Plexus
Old
#2  
Senior Member
Thanks Meter 314
Posts: 1,264
Join Date: Jan 2012
Quote:
Originally Posted by markols View Post
I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.

Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O


In CWM, you need to install from .zip files. It sound like you're trying to install .img.
NOOK Tablet 16GB: CyanoBooting CM9 on eMMC and CM10 from microSD

R800x: WiFi only, LuPuS CM10 kernel, and Supervenom's KXP

Eee Pad SL101 32GB: Stock ROM with root
The Following User Says Thank You to Solar.Plexus For This Useful Post: [ Click to Expand ]
 
markols
Old
#3  
Junior Member - OP
Thanks Meter 0
Posts: 6
Join Date: Apr 2012
Thanks... I was installing .zip files, not .img. I was pretty useless last night. I used Alberts 4_5SD recovery this morn and got it rooted to 9.9.9 and I had superuser and titanium backup so all was good. I ran NWM from internal on the tablet and told it to install ROM from the SD card. I pointed to the file and told it to backup, then install the new ROM it said an error had occured when I tried this. I then booted from another SD card to go to CWM and after the white screen with the box, it went into backup and then restored the ROM, however it took me back to a unrooted version. It looked for the ROM I wanted to load but that was on the other SD card. Now I am back at square one, frustrated...
 
markols
Old
#4  
Junior Member - OP
Thanks Meter 0
Posts: 6
Join Date: Apr 2012
I think I might have found the problem but I am not sure. When I was doing the original CM7 update I wrote CWM to the E drive, (MyNook) so now the drive reports a total size of .99GB with 433MB free. So CWM is installed on this drive and I think that is the proplem. Is there a way to get CWM off the E drive? If I can just uninstall it, will that be sufficient enough to get the root back and then correctly install CM7? Thanks again in advance.
 
markols
Old
#5  
Junior Member - OP
Thanks Meter 0
Posts: 6
Join Date: Apr 2012
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.

This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.

If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
 
Solar.Plexus
Old
#6  
Senior Member
Thanks Meter 314
Posts: 1,264
Join Date: Jan 2012
Quote:
Originally Posted by markols View Post
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.

This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.

If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
The steps that you have listed in this post are correct. If you do this exactly, everything should go according to plan.

Indirect's great app installs CWM to the recovery partition of your device, overwriting the B&N stock recovery. You can always go back to stock recovery if need be, though, so don't worry.
The Following User Says Thank You to Solar.Plexus For This Useful Post: [ Click to Expand ]
 
markols
Old
#7  
Junior Member - OP
Thanks Meter 0
Posts: 6
Join Date: Apr 2012
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
 
Solar.Plexus
Old
#8  
Senior Member
Thanks Meter 314
Posts: 1,264
Join Date: Jan 2012
Quote:
Originally Posted by markols View Post
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
No problem. Glad to hear your wife's happy again!

 
Post Reply+
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Go to top of page...

XDA PORTAL POSTS

Xposed Framework Module for the AT&T Galaxy S 4

Got yourself a brand new Galaxy S 4? Are you looking for some fun mods to make it truly your … more

Job Interview Prep: Phone Screen Part 1 – XDA Developer TV

XDA Developer TV Producer Jayce has been very busy creating videos to help … more

Auto Test Your Android Apps with Robotium

You’ve just finished coding your very first app, but before you release it to the wild, you … more

Open Source CPU Info App for Windows

So you’re playing with your shiny new Windows 8 tablet PC, when one of your like-minded geeky … more