Please Help

---

I got cLK 1.5-rc1 installed. I was booting newly updated ROM (IceCreamTosti HD2 ROM) when it failed to boot I pulled the battery out and tried rebooting it but it stops at initial HTC with white background
for some reason it wont go into recovery anymore
I can go into cLK menu but trying to make any change to partition or booting into recovery just freezes the phone.
I have reinstalled cLK 1.5 (using SD card) couple of times with no luck
I have broken charging port

Can you please advice me what can I do.
Is there any way to format my Nand or delete data/cache (considering I can't enter CWM)

Thanks in Advance

Edit: Strange nothing else would work, tried red reset button and now it boot fine. Thanks a lot for great bootloader...

Is there any way to dual boot on clk? (something that actually works now) :P

Originally Posted by noamsch6

Is there any way to dual boot on clk? (something that actually works now) :P

try searching for sboot in this thread. its a nand partition for second boot img and allows you to dual boot with the second system on SD.

Sent from my HD2 using XDA

Originally Posted by noamsch6

Is there any way to dual boot on clk? (something that actually works now) :P

Did you try this?
http://forum.xda-developers.com/show...&postcount=938

Can someone test this for me ? no it won't blow your phones/brick them.
It is actually clk 1.4 + using mddi to handle display.

I just want to know if screen/framebuffer comes up.

To return back to magldr/clk1.5, just reflash their nbh and use the same partition config you had earlier using DAF or clk settings. NAND will NOT be touched unless you do it explicitly using fastboot. However taking a backup is encouraged.

*remember to keep the back key pressed while booting.

Originally Posted by Rick_1995

Can someone test this for me ? no it won't blow your phones/brick them.
It is actually clk 1.4 + using mddi to handle display.

I just want to know if screen/framebuffer comes up.

To return back to magldr/clk1.5, just reflash their nbh and use the same partition config you had earlier using DAF or clk settings. NAND will NOT be touched unless you do it explicitly using fastboot. However taking a backup is encouraged.

*remember to keep the back key pressed while booting.

flash over clk or this simply flash ..?

I can test this for you tonight if you like, don't have my HD2 with me right now

Originally Posted by Rick_1995

Can someone test this for me ? no it won't blow your phones/brick them.
It is actually clk 1.4 + using mddi to handle display.

I just want to know if screen/framebuffer comes up.

To return back to magldr/clk1.5, just reflash their nbh and use the same partition config you had earlier using DAF or clk settings. NAND will NOT be touched unless you do it explicitly using fastboot. However taking a backup is encouraged.

*remember to keep the back key pressed while booting.

Backing up all of the data and than I will install this I was planing to reflash my phone anyway

EDIT: Installed this CLK and I got something like this on display:

cedesmith's LK (CLK) v1.4
[280] ptn 0 name='misc' start=00000219 ...
[370] ptn 1 name='recovery' start=....
.....


Was this helpful?

Originally Posted by bojanbl

Backing up all of the data and than I will install this I was planing to reflash my phone anyway

EDIT: Installed this CLK and I got something like this on display:

cedesmith's LK (CLK) v1.4
[280] ptn 0 name='misc' start=00000219 ...
[370] ptn 1 name='recovery' start=....
.....


Was this helpful?

Thanks, so mddi works in lk now

Originally Posted by Rick_1995

Thanks, so mddi works in lk now

Excuse my ignorance but whats the big advantage of this?