help me

---

Somebody pls help me!

Now my phone is "brick". Everytime I starts it,it freezes at Samsung logo screen. I can't go to recovery mode but I can go to downloading mode. I have tried to flash stock via ODIN but it always freezes. I have searched on Internet but there is still no way to recover my phone. Can somebody help me?

You've said there is no way then I guess it's no way, then.
If you need help, do list what you have done so gurus here know what went wrong and probably provide solution for you.

What did you flash that caused it to stop booting?

hi creepyncrawly, i did the odin step and it says "success and all and is able to boot up, but it gets to the att rethink possible animation and it just like "loops"? idk what to do.

Originally Posted by pham818

hi creepyncrawly, i did the odin step and it says "success and all and is able to boot up, but it gets to the att rethink possible animation and it just like "loops"? idk what to do.

If you can boot into recovery, do a wipe data/factory reset.

You'll need to give more detailed information so that I can help you troubleshoot the problem. What was the reason you are flashing back to stock? What did you flash previously? What was the phone doing before you flashed back to stock? etc.

Originally Posted by Egungon

So, I messed up with putting the GT-9100 firmware on my 1777. I followed these directions to set my phone back to the correct firmware, but have run in to some problems. I did everything successfully with odin, but when my phone rebooted it still said Galaxy S II GT-9100. But, the ATT screen was back. When I went to set up my phone, it says click on the android character. When I do this it keeps saying that there is an error with Google Services Framework, and to force close. I can't get past this part.

EDIT: Also, when I go back in to download mode. It still says,

Product Name: GT-i9100

EDIT: I think I fixed it, I used.

Samsung_GALAXY_S2_ATT_I777UCKJ1_.exe

The only thing that's wrong now is that the home button doesn't vibrate when I click it, the rest do though.

hi can you link to that?I have the same problem and would be eternally grateful

Originally Posted by votinh

You've said there is no way then I guess it's no way, then.
If you need help, do list what you have done so gurus here know what went wrong and probably provide solution for you.

Okey now i have time to tell you.

First,I'm running Shostock2 v1.1. I have run it for 1 weeks without problems.
Yesterday when I use,it freezes on the home menu. I leave it for 1 hours but it still freezes so I decided to reboot. I pull out the battery and power it again,but it stack at the "Samsung galaxy s2" logo. I tried to access CWM but everytime I use the combo key "volume UP+ DOWN + POWER" it restart to the Samsung logo and freeze. Fortunately I can access the DOWNLOADING MODE so i decided to flash back to stock rom. I go step by step in the topic "How to Prepare Your Phone to Return to the Store or for Warranty Replacement" but it always freezes.

The code in the ODIN is end at
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Sbl.bin
<ID:0/007> NAND Write Start!!

or

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

I have tried all the stock rom in the topic with no root or root but it still freezes at the step NAND Write Start. I tried the Heimdall but it says that "Firmware.xml is missing in the package". I tried the Odin - one click but it still freezes at Cache.img or factory.imf.

Heimdall flash error:

"Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12"

Can anyone help me? I haven't slept last night to search the solution but it still nothin I can do

Originally Posted by doanxuantam

Okey now i have time to tell you.

First,I'm running Shostock2 v1.1. I have run it for 1 weeks without problems.
Yesterday when I use,it freezes on the home menu. I leave it for 1 hours but it still freezes so I decided to reboot. I pull out the battery and power it again,but it stack at the "Samsung galaxy s2" logo. I tried to access CWM but everytime I use the combo key "volume UP+ DOWN + POWER" it restart to the Samsung logo and freeze. Fortunately I can access the DOWNLOADING MODE so i decided to flash back to stock rom. I go step by step in the topic "How to Prepare Your Phone to Return to the Store or for Warranty Replacement" but it always freezes.

The code in the ODIN is end at
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Sbl.bin
<ID:0/007> NAND Write Start!!

or

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

I have tried all the stock rom in the topic with no root or root but it still freezes at the step NAND Write Start. I tried the Heimdall but it says that "Firmware.xml is missing in the package". I tried the Odin - one click but it still freezes at Cache.img or factory.imf.

Heimdall flash error:

"Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12"

Can anyone help me? I haven't slept last night to search the solution but it still nothin I can do

What kind of machine are you running heimdall on? I know on Linux you will get a libusb error if you don't have super user permissions. When running heimdall in terminal use su or sudo command in front of or just before the heimdall commands. If using the gui heimdall in Linux make sure to open the heimdall gui with su privileges.

Sent from my SGH-I777 using XDA Premium HD app

Originally Posted by dayv

What kind of machine are you running heimdall on? I know on Linux you will get a libusb error if you don't have super user permissions. When running heimdall in terminal use su or sudo command in front of or just before the heimdall commands. If using the gui heimdall in Linux make sure to open the heimdall gui with su privileges.

Sent from my SGH-I777 using XDA Premium HD app

I use Windows. I have already had the libusb error in tab FLASH. When in tab Load Package,every rom I load have the error "Firmware.xml is missing in the package".

I followed the instructions here but keep running into the same problem. When the phone boots up, it gets to where I'm supposed to "Touch the android to begin" and I get different applications stopping unexpectedly. I've searched for this problem and can't find anything about it. I found one post where someone had the same problem but his fix didn't work for me.