2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)

Search This thread

kalo86

Senior Member
Jan 17, 2011
1,052
1,740
Turin
Can't we make a flashable zip of this cust partition from someones backup who have this hw default?

Sent from my U8800pro using Tapatalk

It is not needed to be the same kind of cust.img!
You only need to be sure that you have a file called "cust.img" which is about 60MB. Its presence is a must and its content will not be considered because of this sequence of commands:

run_program("/sbin/busybox", "mkdir", "/cust");
run_program("/sbin/busybox", "mount", "-t", "ext3", "-o", "loop", "/cust_backup/image/cust.img", "/cust");
run_program("/sbin/busybox", "rm", "-rf", "/cust");
package_extract_dir("cust/vodafone/it", "/cust/vodafone/it");

This is my actual script for my "Italian device".
As you can see, the content of the mounted cust.img will be erased "rm", "-rf";
cust.img will not be modified! You only need it, no other things.
Only the content of /cust folder will be populated with "my files" which are inside the zip of the new rom (v2.2).
 

termagazis

Senior Member
Nov 22, 2011
704
195
Arachova-Greece
It should be correct. But please verify to have the cust.img into this path:

/.cust_backup/image/cust.img

This directory is also called when you turn on your device into Pink Screen Mode.
But Root Explorer does the same job.
Please verify because the absence of cust.img will corrupt your internal memory.
In the next B876_KALO_v2.2 it's needed the presence of cust.img an usually its dimension is about 59-60MB. That is to say that we can take advantage of free 60 MB to replace system application which are usually placed on /system/app. Great, no? :rolleyes:

Yes cust.img is there.

Sent from my U8800pro using Tapatalk
 

termagazis

Senior Member
Nov 22, 2011
704
195
Arachova-Greece
So you mean that your rom will flash the cust folder so we all have the same,or we must found and flash step3 for hw/default so everyone have the same which will be needed for your rom?

Sent from my U8800pro using Tapatalk
 

kalo86

Senior Member
Jan 17, 2011
1,052
1,740
Turin
So you mean that your rom will flash the cust folder so we all have the same,or we must found and flash step3 for hw/default so everyone have the same which will be needed for your rom?

Sent from my U8800pro using Tapatalk

When I find the international STEP3 file, I will release a new guide and the new v2.2 based on the international prop path /hw/default.
 

kalo86

Senior Member
Jan 17, 2011
1,052
1,740
Turin
i have androidboot.localproppath=unicom/cn too


you mean the B512 Overseas Normal step 3?

B512 is for unicom/cn devices.
Anyway I have all official firmware :)
Thank you

Here

I found an official update that includes step3, it could be the B572...

B572 is again unicom/cn.
I need another release and only one user can help us, kingpicus! :D

EDIT: I found U8800PV100R001C00B521, in this release there is STEP3 international edition.
When I get home I will download this release (this is the first time I see B521).

EDIT_2: Ok, I have downloaded the B521 Rom, now I have UPDATE.APP which change your cmdline into hw/default;

EDIT_3: B876_KALO_v2.2 in upload!
 
Last edited:

vispo60

Senior Member
Jun 2, 2009
89
2
B512 is for unicom/cn devices.
Anyway I have all official firmware :)
Thank you



B572 is again unicom/cn.
I need another release and only one user can help us, kingpicus! :D

EDIT: I found U8800PV100R001C00B521, in this release there is STEP3 international edition.
When I get home I will download this release (this is the first time I see B521).

EDIT_2: Ok, I have downloaded the B521 Rom, now I have UPDATE.APP which change your cmdline into hw/default;

EDIT_3: B876_KALO_v2.2 in upload!
mmmh.... is it the same if i change manually cmdline? i haven't stock recovery, but CWM recovery... do i have to change iti before?....or can i use "install update" from cwm recovery? i'm confused...
 
Last edited:

kalo86

Senior Member
Jan 17, 2011
1,052
1,740
Turin
mmmh.... is it the same if i change manually cmdline? i haven't stock recovery, but CWM recovery... do i have to change iti before?....or can i use "install update" from cwm recovery? i'm confused...

It's impossible to edit cmdline with Root Explorer.
You need to flash STEP3 (please download the right STEP3 from my download list). Flash with the dload folder as usual.
Then you can flash v2.2

I can not understand?
I do a clean format with B572 + step 3
Then Kahlo 2.2 in Recovey ?! wipes all? or not?

Why B572?
You have to download STEP3 from my download list, put into the dload folder and flash it into recovery (the stock one).
Then change again recovery and flash v2.2.
Of course wipe all data/factory and other wipes.
 

cocous

Senior Member
Apr 11, 2009
846
129
Volos
I can not understand what is happening. after installation of the phone opens and closes all the time and shows the blue android robot
 

kalo86

Senior Member
Jan 17, 2011
1,052
1,740
Turin
I can not understand what is happening. after installation of the phone opens and closes all the time and shows the blue android robot

Simple: you did not follow the new guide.
Did you flash the UPDATA.APP package before flashing B876_KALO_v2.2?
This is a new preliminary step and it is a must.

@ USERS: please read new instruction and new PREREQUISITES.
 
  • Like
Reactions: rilam1987

dingila

Senior Member
Feb 11, 2012
890
155
Stara Zagora
It's impossible to edit cmdline with Root Explorer.
You need to flash STEP3 (please download the right STEP3 from my download list). Flash with the dload folder as usual.
Then you can flash v2.2



Why B572?
You have to download STEP3 from my download list, put into the dload folder and flash it into recovery (the stock one).
Then change again recovery and flash v2.2.
Of course wipe all data/factory and other wipes.

Which update to reset? 521,552,752?
Does it matter?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 41
    2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)

    Hello Dear Community!
    Today I decided to share my work, a customized rom based on the latest Gingerbread official ROM of the Huawei Honor U8860.
    This porting wants to be the most light possible, avoiding the Huawei traces and trying to make difference with stability, speed and zero bugs.
    This is a list of the rom features:

    - Based on Gingerbread 2.3.6 – Official B876 (Firmware Huawei Honor U8860);
    - Root permanent permission;
    - Overclock kernel;
    - Unlocked FPS limit (30 @ 55);
    - Zipaligned apks;
    - Added BusyBox;
    - Removed Gallery 3D and replaced with QuickPic;
    - Removed Huawei Launcher and replaced with Zeam Launcher;
    - Corrected APNs list (only the Italian Internet Wind apn);
    - Edited carrier name "Wind Telecomunicazioni Spa" into "WIND";
    - Edited carrier name "Telecom Italia SpA" into "TIM";
    - Edited carrier name "Hutchinson H3G Italia" into "3 ITA";
    - Removed the stock Browser and replaced with Dolphin Browser HD;
    - Updated Market (now Google Play), Google Search Box, FlashPlayer;
    - Removed Social Huawei and other apks from the stock rom;
    - Increased performance by editing build.prop;
    - Enabled HDR function on camera;
    - Removed File Browser and replaced with Root Explorer;
    - Independence of the /cust partition;
    - Removed WPS function on WiFi section;
    - Removed ipcall function;
    - Added the battery percentage on the status bar;
    - Stock Android Gingerbread lockscreen;
    - Removed the energy saving function;
    - Bypass of the Android Settings Wizard;
    - Optimized the GPS config for Europe;
    - Tethering WiFi is available and works fine;
    - Added by default the Quick Settings Widget in the notification bar;
    - FM Radio works fine;
    - Added function Volume Rocker Screen Wake Up;
    - A new graphic for Contacts and Phone applications;
    - Removed Fast Boot option;
    - Patched the libsqlite.so for better performances;
    - Disabled bugreports generation in kernel ramdisk;
    - Permanent Root Access;
    - No more is needed SuperUser.apk for root-based applications;
    - The default video codec for High Video Recording Quality is H264;
    - The default audio codec for High Video Recording Quality id AAC;
    - Edited the carrier name "Sonaecom - Serviços de Comunicações, S.A." into "Optimus";


    PREREQUISITES - ATTENTION PLEASE

    a) ROM
    Gingerbread 2.3.5 Stock Huawei version (B512, B521, B540, B552, B565, B572)
    or any customized Gingerbread ROM (CyanogenMod, MIUI, 2.3.5, 2.3.6, 2.3.7)
    or any ICS Rom (DZO Aurora, Genokolar MIUI v4);

    b) Recovery
    CWM Recovery 5.0.2.7
    If you have the stock recovery, you will not be able to install any customized ROM. So, you have to do these steps: download the CWM Recovery 5.0.2.7 (previous link to download the file), power off your device and turn on into Pink Screen Mode (holding down VOL+, VOL- and Power button). Plug in your usb cable to your pc and wait for the automount of the new drive. Navigate to the /image folder and rename the stock "recovery.img" into "recovery.bak".
    Now simply copy the CWM Recovery into the /image folder and be sure that its name is "recovery.img", otherwise you have to rename it into "recovery.img".
    Unmount the periferic, remove the usb cable and extract the battery to shutdown the phone. That's all.
    You can verify the new recovery installation entering in recovery mode (holding down VOL+ and Power button).


    INSTALLATION PROCEDURE FOR FULL PACKAGE

    0) Make sure that you have installed all prerequisites;
    1) Download the zip file of the rom with your pc;
    2) Shutdown your smartphone and to be really sure unplug the battery;
    3) Insert your battery and power on your smartphone into recovery mode holding down VOL+ and the power button (be sure that you have the CWM 5.0.2.7);
    4) Go to advanced ---> reboot recovery;
    5) At the new recovery boot go to "mount and storage";
    6) Mount usb storage;
    7) Plug in your usb-microusb cable;
    8) Copy the downloaded zip file into the external sdcard;
    9) Wipe data/factory;
    10) Wipe cache;
    11) Wipe Dalvik Cache;
    12) [OPTIONAL if you experience a huge battery drain only] Wipe Battery Stats;
    13) Go to "mount and storage", then "format /system";
    14) Install zip from sdcard;
    15) choose zip from sdcard and select the downloaded zip file;
    16) Install complete!
    17) reboot system now.

    Please wait about 2 minutes for the install process and be patient for the first boot.
    At the first boot the default language has been set to English. This choise because the rom needs to be more international possible.
    Anyway the rom is multilanguage and offers the default available languages of the stock Android base-rom.
    The default keyboard is the stock Android Latin.


    DOWNLOAD
    Date: 2012/08/22
    File name: B876_KALO_Extreme.zip
    Changelog: Increased the 3G speed, fixed the network dropping from 2G/3G, updated applications.

    If you appreciate my work and want to thank me, please send a donation, it's a huge reason to keep alive this Android project for U8800 Pro.

    DONATE (PayPal)

    FaceBook Group Page -----> KALO ANDROID U8800 Pro

    Special thanks:
    - Genokolar (kernel and recovery Guru);
    - mik_os (libsqlite.so tweaks);
    - pikachukaki (theme creator and tester for his B876 based-ROM);
    - zontovolo (the best beta-tester I've seen!);
    - cuvetto (for the better audio experience);
    - merafly (for his advices and suggestions);
    - tasosmrs (for the modded phone.apk)
    - All users who are using/testing my releases;

    SPECIAL THANKS TO DONATORS:
    - Nektarios Orfanidis;
    - Pavel Igorevich;
    - Denis Avetsuk;
    - Eugenio Livio;
    - José Alexis Morera Fernández;

    Happy flashing!

    kalo86
    8
    well done
    i'm glad , because you put the ,, patched libsqlite ,, in your update (1.7) ...
    its a great work from ,, mik_os ( a great developer )
    i think that this version , gonna make even happier the users of your rom...
    i'm a fan of your work , even if i'm steel riding my horse ... :)
    congratsulations again ..

    for those who still wondering what it does
    read this and i hope you'll understand.......

    Android phones as the underlying database using sqlite3. sqlite3 writes efficiency is very low, because the sync feature turned on by default, and fsync() must be performed after each insertion, the resulting system efficiency is low, and the disk life is reduced.

    I try to disable sync feature by default in exchange for greater IO performance and reduce disk consumption. While doing so may result in data integrity problems, but I still like to use it because most of the sqlite insert action can be completed within a few seconds, not too much to consider issues such as sudden power-down.

    After modified, the time of insert 2000 records to sqlite3 db, from 1m11s reduce to 2s.

    -----------------------------

    With Android applications, the database operation is non-persistent, normal step in app is:
    1.open db
    2.do read/write
    3.close db
    with step3, the data in cache will be flush to disk. so user will not notice any sudden lag, always smooth.

    With SYNC-ON, the db operation like this:
    1.open db
    2.1. write a record/do a transcation
    2.2. fsync()
    2.3. write a record/do a transcation
    2.4. fsync()
    .....
    3.close db/fsync()

    with SYNC-OFF, operation like this:
    1.open db
    2.1 write a record/do a transcation
    2.2 write a record/do a transcation
    ....
    3. close db/fsync()

    So, no-sync can significantly save IO time.
    6
    hope you can do something!thanks

    i think that you have the tools and knowledge to do it yourself ...
    take a look at this ...
    http://xdaforums.com/showthread.php?t=1411317

    try it yourself , and tell me if you want something more ....

    I FOUND IT
    download this ... http://www.mediafire.com/?2ues73f06ialncf
    i was made this for kalo's v1 , but i think its the same,, so you can use it ....
    unzip , and open the folder ..
    first make a BACKUP ,, and then put it via root explorer , in , system/framework .. (replace it with the existing one)
    give permissions ( rw-r--r-- ) , and reboot your phone ..
    dont worry , it needs 2-3 minutes to boot again ...

    THIS IS ONLY FOR TERMAGAZIS
    IF HE TEST IT AND ITS OK ,,
    Then you can use it , all the others , users of this rom

    so we'll have to wait , termagazis to respond , and tell us if it works
    6
    TO ALL OF YOU , USERS OF THIS ROM ( KALO V1.6 )
    DOWNLOAD THIS
    http://www.mediafire.com/?7i3tjuvlgtayzrx

    ITS a patched ,libsqlite.so for 2.3
    probably its gonna work....

    just open root explorer and copy , libsqlite.so , to ,system/lib . ..
    replace it with the existing one and give permissions ( rw-r--r-- )
    wait , or reboot your phone .....

    if this works , you're gonna love this rom , even more ...

    HAVE A BACKUP ON YOUR SD CARD BEFORE TRYING THIS MODS...
    ALL GREDITS GOES TO
    Μik_os
    Ungaze

    I just found it at this thread
    http://xdaforums.com/showthread.php?t=1000899

    enjoy :D
    6
    well.. friend , korekore1 ,, is right about MIUI dialer , its more than a theme ... ;)

    so i decide to make a dialer for , KALO V1.8 ,, and probably gonna work also for V1.6 and V1.7 .....
    i took the .png's from , bluemagic theme ...

    THEMED DIALER ... download
    http://www.mediafire.com/?eep3y6km85m57fe

    and the , themed settings.apk , gonna work also for V1.8 ...
    http://www.mediafire.com/?7lkzal5skit8hvl

    HOW TO INSTALL , the themed dialer ...

    first , unzip ..
    then , via root explorer , COPY , the contacts.apk and phone.apk , and PASTE them to ,, system ,, give permissions (rw-r--r-- ) and then ,MOVE , both apps to ,, app ,, and replace them ... reboot and enjoy ...
    the path is ,, system/app ,, but we have to do the above trick to avoid force close before we give permissions ,, thats why we give permissions to ,, system ,, and then we move them to ,, app .... ( easy) :cool:

    if someone could make screenshots , i appreciate it .... :)