Originally Posted by iconata

if your phone is 7 trophy you can download it from the forum. it's version 5.12.. or you can download it from the cab sender & updates thread

Hi again!

I found the WP7 Update Cab Sender application but I still can't find the Booloader 5.12 cab file, can you help me find it?

Regards,
techtalkonline.

Hi my HTC HD7 is from asia (Hong Kong) When i looked for a nodo rom they are like 3+ asia roms which one do i get??

Originally Posted by GoodDayToDie

Two questions:
1. Is the USB hub powered? The phone's USB port can't supply enough power to run a cardreader (it's intended to be a client port, not a host port).
2. What USB hub are you using that can connect to the phone's microUSB port?

Additionally, you should be aware that a USB hub is another USB device (USB Host Controller class). If the phone is just looking for a card reader (USB Mass Storage class) it won't be able to use the hub. A Y-cable is recommended because it allows you to directly connect the phone to the card-reader, while also providing power for the reader.

Yeah i think thats my problem too. Im using a usb flash drive as my SD card and using a USB hub for connecting the phone's usb cable and the flash drive. As you said i think the reason why my phone is in USB host mode for ages is because my phone isn't connected to the flash drive instead the flash drive and phone is connected to the PC separately and my USB hub has a light which indicates which usb port is working and only my flash drive's light is flashing and my Phone cable's light isn't flashing. Am i right?

Yeahhhh, that configuration hasn't got a chance of working. The phone enters USB Host Mode. You shouldn't be connecting it to one of the ports on a USB hub; you should be connecting the hub to the phone's USB port (if this will even work through a hub)! Devices connected to the client ports on a USB hub can't even see each other directly!

hi,

i tried your method but my phone's went into a reboot loop when it boots to USB Host mode

edit:
here is my equipments



1. a Y-cable ( i also have a Y (or maybe T)-board, but it didn't work)
2. the gold card
3. a generic card reader (it's fast & cheap)

Originally Posted by aramadsanar

hi,

i tried your method but my phone's went into a reboot loop when it boots to USB Host mode

edit:
here is my equipments



1. a Y-cable ( i also have a Y (or maybe T)-board, but it didn't work)
2. the gold card
3. a generic card reader (it's fast & cheap)

Thanks for the feedback. Format the card to fat 32. Then it will work.

Originally Posted by thekiller99

Hi my HTC HD7 is from asia (Hong Kong) When i looked for a nodo rom they are like 3+ asia roms which one do i get??

RUU_Schubert_hTC_Asia_SEA_WWE_1.54.728.01_Radio_5. 51.09.29_22.32.50 should work.

Regards, Klaus

Originally Posted by MarysFetus

RUU_Schubert_hTC_Asia_SEA_WWE_1.54.728.01_Radio_5. 51.09.29_22.32.50 should work.

Regards, Klaus

That's right.

Originally Posted by techtalkonline

Hi again!

I found the WP7 Update Cab Sender application but I still can't find the Booloader 5.12 cab file, can you help me find it?

Regards,
techtalkonline.

here you are http://download.windowsupdate.com/ms...3ac9c676c2.cab

Why Y cable is required?

this cannot be an card reader inside laptop and a normal usb cable signed in laptop?

or instead of sd card an 8gb flash drive?