you kedssol
hahaha..
F>Y>I
firmware is the basic need of a phone,without it phone will not work.!!
if you want to flash ur phone in less than 2 min.just use ODIN 1.84(flashing back to stock firmware)
as of mine,i have DDLA1 firmware.
requirements:
-USB DRIVER TOOLS INSTALLER
-ODIN 1.84
-AND THE FIRMWARE YOU DOWNLOADED
(THE FIRMWARE FOLDER IS ABOUT 150MB)
DOWNLOAD THIS FILES ON THIS SITE,JUST SEARCH AND READ
STEPS:
(CLOSE KIES)
1.INSTALL USB DRIVERS(VERY IMPORATNT)
2.TURN OFF YOUR CP
3.GO TO DOWNLOAD MODE (PRESS VOLUME DOWN KEY,HOME KEY,AND POWER BUTTON KEY)
4.PRESS VOLUME UP TO CONTINUE
(DONT CONNECT IT TO COMPUTER)
5.OPEN ODIN 1.84
AS YOU CAN SEE,THE FIELDS ARE PIT.BOOTLOADER,PDA.PHONE.CSC
6.CLICK PIT,CLICK BROWSE,FIN THE FOLDER OF THE FIRMWARE.
7.select totoro_0623.pit(just a sample,this is my firmware DDLA1)
8.follow this steps:
bootloader.pda.phone.csc. section(dont check it because it will be automatically checked)
bootloader:BOOT_S5360DDLA1_REV05.tar
pda:PDA_S5360DDLA1_REV05.tar
phone:MODEM_S5360DDLA1_REV05.tar
csc:GT-S5360-MULTI-CSC-ODDLA1.tar
9.check Re-partition on the upperleft..
leave uncheck the "FLASH LOCK,PHONE EFS CLEAR,PHONE BOOTLOADER UPDATE"
10.CONNECT YOR PHONE TO PC.
IN THE "id COM" section you must see the word "ADDED"(you must install the samsung drivers)
after that..click start..
it will process.(about 30 seconds)
after that proccessing you will see the word "PASS"
dont remove the connection wait until it booted up to the home screen.
after that,you may remove the connection..
enjoy!!
tested and proven by me!!
there is no pay for this tutorial!!
JUST HIT THANKS!!

---------- Post added at 08:38 PM ---------- Previous post was at 08:18 PM ----------
THIS IS A SIMPLE TUTORIAL!!
HAHAHA,,
FEEL THE DIFFERENCE!!
REQUIREMENTS:
DROID VPN ONLY
YOU MUST USE A SIM CARD THAT IS SUPPORTED BY SMART COMMUNICATIONS(SMART BUDDY AND TALK N TXT)!!
STEPS:
1.DOWNLOAD DROID VPN ON MARKET
2.OPEN IT.YOU MUST CREATE ACCOUNT(ITS FREE)
YOUR EMAIL ADD MUST BE VALID BECAUSE DROID VPN WILL SEND YOU THE PASSWORD ON THAT EMAIL ADD..THE EMAIL ADD YOU WILL ENTER MUST BE YOUR OFFICIAL EMAIL ADD..(VERY EASY RIGHT?)
AFTER THAT DONT CLICK THE WORD START(very important)
PRESS MENU
*CLICK UDP PORT(put the values 9200)
*BIND LOCAL PORT(put 80)
then youre done..
before you connect,
you must turn on your packet data!!
you must see in the status bar the E with arrow going up and down
click START!!
enjOy!!!
ARAR31!
from philippines!!
proud to be pinoy!!
im Just 17 and i know what im doing!!
all my tutorials are TESTED AND PROVEN BY ME!!WORKING!!
WANT TO SEE SOME DETAILED TUTORIALS?!
JUST SEARCH MY NAME AND THE ANSWERS WILL BE THERE!!