i appreciate any information on the topic
If you try to sbf with the 5.6.890 it will fail and you will probably break your bootloader as the files have changed with the update and there is no "real" way back as of yet...BUT...
Q9Nap has helped out
" if you've actually flashed the 5.7.906 leak and need to fxz your device, the stock 5.6.890 fxz will fail becuase there are some components that cannot be reverted. here's a package of 5.7.906 fxz components you can drop in to your 5.6.890 fxz folder or zip so you can flash with rsdlite:
Hope it helps
Hold on... Will flashing these through AP Fastboot put me on 5.7.906? I'm unable to flash a .zip leak though stock recovery. It fails when "flashing BP", bricks me, and I must FXZ to 5.6.890 to get it up and running again.
Here's a video showing what happens when I try to flash 5.7.894 (have only tried this since it can be 5.6.890 FXZ'd over).
You should only flash the package i made if you're trying to get back to 5.6.890 from 5.7.906. If you're on 5.7.894, you should still be able to flash the stock 5.6.890 fxz without any issues. Not sure why you're getting the error on bp; as long as you're using an unmodified 5.7.894 leak and stock recovery it should work fine. I'd try flashing 5.6.890 with rsdlite as it flashes all possible partitions; pete's moto-fastboot method doesn't flash everything.
I'm currently on 5.6.890 running various safestrapped ICS builds, but would like the updated radio from the newer leaks. I'm afraid to try anything higher than 5.7.894 because I know I can't go back...until now maybe with these files. My fear was I would flash 5.7.906 with stock recovery, get bricked, and be stuck there because it failed while flashing like 5.7.894 does to the phone.
|Thread Tools||Search this Thread|